Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
View alarm on BSC: 1- Click on Alarm Maintenance => Browser Alarm and then you will see this window beloved:
2- And right on alarm fill choose Filter Alarm and then type ID of alarm into Textbox and choose site name in fill and OK.
Next you will see alarm Radio Link Prompt Alarm in fill:
PHOEUNG SARIM
After that the new windows Browse TRX Attributes show down and then click on Device Attributes look to Receive Mode and Send Mode are corrected setup paramater. Note: If site configure 2TRX paramater are (Receive Mode: Dividing Receive) and (Send Mode: No Combining). Before you have to call to province clear this alarm please check in system first.
Mistake problem
PHOEUNG SARIM
Step 2: Clear alarm - Right click on cell name => Click on Configure Cell Attributes the new window will show you as beloved:
- Select on cell view and move cell name to Selected cells and Next>
PHOEUNG SARIM
- Choose button TRX Config the new window Set Cell Attributes:
PHOEUNG SARIM
- The slice window Configure TRX Attributes choose panel Device Attributes and change some parameter on Receive Mode and Sent Mode. By Receive Mode change to Dividing Receiver and Sent Mode change to No combining if configure 2TRX. And click OK => OK => Finish.
PHOEUNG SARIM
Radio Link on Configure 3TRX: - Right click on Card DDPU => View Site Board and then the new slice Browse Antenna Feeder Property beloved:
- Choose tab Antenna Feeder Attributed => Downlink Tributary you will the mistake. Note: If site configure 3TRX the Downlink Tributary must be change SkyFeedNo ABB non AAB.
PHOEUNG SARIM
Clear it
Right click on site name choose tab Configure Site Board Attribut:
PHOEUNG SARIM
Choose Antenna Feeder Attributes => click on Tributary No. choose Downlink Tributary and on SkyFeedNo please change transceiver type to ABB the same beloved. And OK => OK
Finish
PHOEUNG SARIM