Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Reinforced 3M test clips with PIN 1 labelled for no confusion or accidents. Gold plated 16-way clips can be used any compatible SOIC device.
PRESENTS THE USBJTAG NT USB KIT SPECIFICALLY WIRED TO SUPPORT MX25Lxxxx / S25FLxxx - 16WAY SPI CHIPS. OTHER SPI 25L CHIPS DEPENDS ON THE PIN FORMAT AND HOW IT PLAYS TOGETHER WITHOUT CONFLICT WITH THE SOFTWARE.
1 of 4
Labelled Test pin for powering the R362 point to easily ash units without soldering. Solid push pin with a rm connection to the wire.
Durable test clip sockets to ensure you have a stable connection always. Built in the test pin cable for the all in one experience.
2 of 4
After opening your device you want to search for the SPI Flash Chip. We are focusing on the SB6120 but on other devices the pinout could be different. Line up the clip to the chip and make sure the connection is rm. When done, prepare the cable from your kit and your USBJTAG - ensure your material is lined up correctly. Pin 1 on the ribbon cable is color coded in red.
Make sure all connections are proper and proceed with plugging in the modems power. Wait 10 seconds then take the next step. Being impatient, not waiting for the 10 secs could prevent detection of the ash.
3 of 4
NO
SOLDERING
This is the R362 spot where you need to place the ISP Pin from your cable kit. Just make sure that you follow the details above and your all set for the USBJTAG Software to ash!! Any questions please send them over to sales@modempremodz.net
4 of 4