Sei sulla pagina 1di 6

21/12/9 Security Level:

Inter-office Handover

----between huawei VMSCs and legacy MSCs.

www.huawei.com

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential


Inter-office Handover
 Because new huawei core network adopt MSC POOL solution, there is not Inter-
office handover when a subscriber move inside huawei MSC POOL domain.
 There are only intra-BSC/inter-RNC/inter-BSC/inter-RNC handover type,and they
are both intra-office handover, and we need not configure additional data in VMSC
 We need to do inter-office handover test between huawei VMSCs and legacy MSCs.
 First, we may select Huawei EKM_VMSC1 and Nortel EKM_MSC as a attempt, the
sheet as follows is necessary negotiating parameter.

2G 3G
Mobile Mobile
MSC
MSC Number VLR Number SPC(Hex) country Networ LAI(Hex GCI(Hex LAI(He SAI(H
Name
code k code ) ) x) ex)

Huawei
9194951999 9194951999
EKM_VMS 2919 404 80 484 1 483 1
96 96
C1
Nortel 9194461999 9194461999
28E9 404 72 0098 CCB1 NA
EKM_MSC 96 95

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 2


Inter-office Handover Between
EKM_VMSC1 and Nortel EKM_MSC
Nortel HLR
Huawei HLR

Nortel STP Huawei SGW

EKM VMSC1
EKMMSC_N1

Existing_BSC HW_RNC HW_BSC

Existing_BTS HW_NodeB HW_BTS

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 3


Handover Precondition

 Be sure that the test subscriber can both do


location_update normal by existing BSC and huawei
BSC/RNC

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 4


Handover Configure

Core Network Side


 EKM_VMSC1 side----------pls refer to the attachment as follows

°ü

 Nortel EKM_MSC side-----pls let BSNL refer to the steps in the


attachment and do Corresponding configuration

BSC/RNC Side
Need to configure adjacent LAI/GCI(for 2G) and LAI/SAI(for 3G)
Need to configure adjacent LAI/GCI(for 2G) and LAI/SAI(for 3G)
in huawei BSC/RNC side and existing BSC Side

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 5


Thank you
www.huawei.com

Potrebbero piacerti anche