Sei sulla pagina 1di 1

Firmware Upgrade Instructions for DSL600EW

IMPORTANT: After performing the following steps, all settings that are previously saved
will be lost.

NOTE: This firmware upgrade instructions is only applicable if you are upgrading from
firmware version 43.xx.xx.

1. Logon to the router


2. Click ‘Advanced’ > click ‘Firmware Update’
3. Click '
Browse'> double-click ‘config.xml’
4. Click '
Update Gateway'
5. Once completed, click '
Browse'> double-click
‘ram_zimage.ar7xxx.nsp.squashfs.upgrade.bin’
6. Click '
Update Gateway'
7. Once completed, click '
Browse'> double-click ‘nsp.annexA.upgrade.img’
8. Click ‘Update Gateway’
9. When the message below appears, wait for about 2min before restarting the router:

10. After the router is switched on, wait for about 1min before performing a hardware reset:
- use a pin to press and hold the reset button for about 10sec
11. Clear your web browser cache
12. Logon to http://192.168.1.1 to configure the router

Potrebbero piacerti anche