Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
(*) Obs.: em "Private IP", a terminação 101 pode mudar. Procure o IP atribuído à
sua máquina digitando "ipconfig" no prompt do MS-DOS.
- Selecione "Enabled";
- Name: Virtual Server FTP;
- Private IP: 192.168.0.101;(*)
- Protocol Type: TCP;
- Private Port: 20;
- Public Port: 20;
- Schedule: always;
- Clique em "Apply";
- Selecione "Enabled";
- Name: Virtual Server FTP 2;
- Private IP: 192.168.0.101;(*)
- Protocol Type: TCP;
- Private Port: 21;
- Public Port: 21;
- Schedule: always;
- Clique em "Apply";
- Selecione "Enabled";
- Name: Emule1;
- Private IP: 192.168.0.101;(*)
- Protocol Type: TCP;
- Private Port: 4662;
- Public Port: 4662;
- Schedule: always;
- Clique em "Apply";
- Selecione "Enabled";
- Name: Emule2;
- Private IP: 192.168.0.101;(*)
- Protocol Type: TCP; <------------------- Mudar para UDP, liberando a porta
UDP
- Private Port: 4672;
- Public Port: 4672;
- Schedule: always;
- Clique em "Apply";
- Selecione "Enabled";
- Name: Virtual Server FTP;
- Action: Allow;
- Source:
-> Interface: WAN;
-> IP Start: *;
-> IP End: *;
- Destination:
-> LAN;
-> IP Start: 192.168.0.100;
-> IP End: 192.168.0.199;
-> Protocol: TCP;
-> Port Range: 20 (deixe o segundo campo em branco);
- Schedule: always;
- Clique em "Apply";
- Selecione "Enabled";
- Name: Virtual Server FTP 2;
- Action: Allow;
- Source:
-> Interface: WAN;
-> IP Start: *;
-> IP End: *;
- Destination:
-> LAN;
-> IP Start: 192.168.0.100;
-> IP End: 192.168.0.199;
-> Protocol: TCP;
-> Port Range: 21 (deixe o segundo campo em branco);
- Schedule: always;
- Clique em "Apply";
- Selecione "Enabled";
- Name: Emule1;
- Action: Allow;
- Source:
-> Interface: WAN;
-> IP Start: *;
-> IP End: *;
- Destination:
-> LAN;
-> IP Start: 192.168.0.100;
-> IP End: 192.168.0.199;
-> Protocol: TCP;
-> Port Range: 4662 (deixe o segundo campo em branco);
- Schedule: always;
- Clique em "Apply";
- Selecione "Enabled";
- Name: Emule2;
- Action: Allow;
- Source:
-> Interface: WAN;
-> IP Start: *;
-> IP End: *;
- Destination:
-> LAN;
-> IP Start: 192.168.0.100;
-> IP End: 192.168.0.199;
-> Protocol: UDP;
-> Port Range: 4672 (deixe o segundo campo em branco);
- Schedule: always;
- Clique em "Apply";
- Selecione "Enabled";
- Name: Permitir PING na porta WAN (ou qualquer coisa parecida);
- Action: Allow;
- Source:
-> Interface: WAN;
-> IP Start: *;
-> IP End: *;
- Destination:
-> LAN;
-> IP Start: 192.168.0.1;
-> IP End: 192.168.0.1;
-> Protocol: ICMP;
-> Port Range: 8 (deixe o segundo campo em branco);
- Schedule: always;
- Clique em "Apply";