Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
TASK: 01 (P3)
Safety:
Procedure:
1. At first we connected the wing and chord and we balanced it
2. We find out the base and hypotenuse by scaling.
3. The marks of base and hypotenuse should be taken accurately.
4. From base and hypotenuse first we find out the AOA with the help of cosine.
5. Connecting with aerofoil horizontally ties up the spring scale and then mark
reference point on a table and then we find out the drag.
6. Subtraction initial reading from final reading, we find out the lift and drag.
7. We imagine the value of the drag is 0.5 kg always constant.
8. Weight of aerofoil 0.9 kg is added in the lift.
Measurement of AOA:
1 4 4.4
2 6 5.9
3 8 7.4
Graph: Lift vs. AOA
The value of AOA plotted the X axis and the value of lift plotted the Y axis.
SL NO AOA DRAG(KG)
1 4 1.5
2 6 1.75
3 8 2
The value of AOA plotted the X axis and the value of drag plotted the Y axis.
The value of lift plotted the X axis and the value of drag plotted the Y axis.
Graph: LIFT vs. DRAG
The value of lift plotted the X axis and the value of drag plotted the Y axis.
Note: