Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Kit Contents:
A 1X B 1X C 1X D 1X
Preparation Tools:
14mm
Allen 27mm 12mm
Meaning of Characters:
Direction ! Caution / Attention
1 OF 4 4-19-01
Refill cooling system and operate engine, POWER CORD ROUTING:
8 checking installation for leakage. 9 Route Cord through the plug protector and
secure to the lower grill bumper
Antifreeze B
Water
1:1
1 2
Feed the cord over the dipstick tube Route cord through an opening in the
10 bracket, which is welded to the oil pan and 11 lower LH. or R.H. side of the bumper
secure with a tie-wrap. Plug the connector grille using the heater element plug-in
into the heater element. end.
C B
Secure cord to the wire harness with two Re-install engine underguard in reverse
12 tie-wraps. NOTE: Ensure that the cord 13 order of removal.
does not hang below the vehicle and
does not contact the exhaust compo-
nents. Wire
Harness
14
C C
B
Exhaust
3 OF 4 4-19-01
15 16
WARNING
2 1 Before connecting heater to power source,
make certain element is immersed in cool-
ant. NEVER energize heater in air. If so
8 mm energized, element sheath could burst caus-
ing personal injury.
4 OF 4 4-19-01