0 valutazioniIl 0% ha trovato utile questo documento (0 voti)
142 visualizzazioni1 pagina
The document is a KTH Tool that calculates the nominal bore size needed for a hydraulic system based on the inputted flow rate, to minimize noise and turbulence. It indicates that for a flow rate of 1350 liters per minute, a 4" nominal bore would be required, with a resulting flow velocity of 2.45 m/s, which is below the maximum recommended velocity of 3 m/s for pressure lines.
The document is a KTH Tool that calculates the nominal bore size needed for a hydraulic system based on the inputted flow rate, to minimize noise and turbulence. It indicates that for a flow rate of 1350 liters per minute, a 4" nominal bore would be required, with a resulting flow velocity of 2.45 m/s, which is below the maximum recommended velocity of 3 m/s for pressure lines.
Copyright:
Attribution Non-Commercial (BY-NC)
Formati disponibili
Scarica in formato XLS, PDF, TXT o leggi online su Scribd
The document is a KTH Tool that calculates the nominal bore size needed for a hydraulic system based on the inputted flow rate, to minimize noise and turbulence. It indicates that for a flow rate of 1350 liters per minute, a 4" nominal bore would be required, with a resulting flow velocity of 2.45 m/s, which is below the maximum recommended velocity of 3 m/s for pressure lines.
Copyright:
Attribution Non-Commercial (BY-NC)
Formati disponibili
Scarica in formato XLS, PDF, TXT o leggi online su Scribd
From the flow rate you input in the yellow box, this KTH Tool calculates the nearest
nominal bore required to minimise noise and turbulence. Maximum acceptable flow velocities to minimise noise and turbulence in common hydraulic fluids are indicated in green.
Flowrate: 1350 Litres per minute
Outside Sched of Inside Flow
Nominal Bore Diameter pipe as Wall thickness Diameter Velocity Nominal Bore (mm) per API614 (mm) (mm) (m/s)