Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
PED 97/23/CE
PN according to EN 1092-2 PRESSURE TABLE
FOR CONTROL VALVES
for all control valves
PN10/16 and PN25 Position indicator DN PN PFA PS
DN 40 to 200 : cat 3.3 with purge Cat
” mm bar L1 L2 G1 G2
DN 250 and 300 : cat. I Brass and stainless steel
1 1/2” 10/16 16 16 16 x x 3.3
Valve head 40 and 50 10/16 16 16 16 x x 3.3
Cast iron with Pressure connection 65 10/16 16 16 16 x x 3.3
epoxy coating 80 10/16 16 16 16 x x 3.3
Nuts and bolts 100 10/16 16 16 16 x x 3.3
EPDM membrane Stainless steel 125 10/16 16 16 16 x x 3.3
(reinforced EPDM) 150 10/16 16 16 16 x x 3.3
200 10 10 10 10 x x 3.3
Reversible EPDM 250 10 10 10 10 x x I
seat seal 300 10 10 10 10 x x I
G G G
A A A
When the downstream pressure rises, the pilot When the downstream pressure is too low, no When the pilot G opens or closes, pressure in
valve G closes. Pressure in the upper chamber pressure is acting on the membrane and the the upper chamber forces more or less on the
rises also and forces the membrane to close pilot G opens. Pressure in the upper chamber membrane to open or close the main valve.
the main valve A which reproduces the move- is released and the valve A opens reproducing
ment of the pilot. the movement of the pilot.
56