Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
1
DEEN DAYAL FIELD DEVELOPMENT
A038-03-16-43-DS-12 Rev. 0
PROJECT-PLQP, GSPC
Page 1 of 2
S. No. Tag No. Size N.B. Design Condition Hydrotest Piping P&ID Pltf Service Rating
Pressure Class No. Name
Run x Pressure Temp. Kg/cm2g
Branch Kg/cm2g ° C
1. 151- Well
SP-01 20” X 20” 161 70 241.5 PF1N PLQP 1500#
1118 Fluid
NOTES:
1. All material shall meet the requirements of Piping Material Specification (Spec no. A038-
03-16-43-SP-04. Specific requirements for DSS material, sour service etc. as required by
the respective piping class shall be met.
2. Name of the platform shall be suffixed to tag no. e.g. SP- 01 (PLQP).
3. All scraper tees shall be supplied with BW ends & the ID shall match with the
corresponding pipe as per the respective piping class.
4. Thickness of run/ branch is to be calculated by vendor to the required design pressure &
Temperature and shall be submitted for Company’s review & approval.
5. All pressure welds shall be 100% radiographed.
6. Protective coating shall be as per Spec. no. A038-03-06-42-SP-02
7. This datasheet is tentative & shall be firmed up during Detail engineering.