0 valutazioniIl 0% ha trovato utile questo documento (0 voti)
794 visualizzazioni1 pagina
This document provides instructions for configuring a TP-Link ADSL modem to operate in either bridge mode or PPPoE mode. The steps for bridge mode are to access the advanced setup, edit the VPI/VCI settings, select bridge service and encapsulation type, enable the bridge service, save and reboot. The steps for PPPoE mode are similar but specify configuring a PPPoE username, password and service name instead of bridge settings.
This document provides instructions for configuring a TP-Link ADSL modem to operate in either bridge mode or PPPoE mode. The steps for bridge mode are to access the advanced setup, edit the VPI/VCI settings, select bridge service and encapsulation type, enable the bridge service, save and reboot. The steps for PPPoE mode are similar but specify configuring a PPPoE username, password and service name instead of bridge settings.
Copyright:
Attribution Non-Commercial (BY-NC)
Formati disponibili
Scarica in formato DOC, PDF, TXT o leggi online su Scribd
This document provides instructions for configuring a TP-Link ADSL modem to operate in either bridge mode or PPPoE mode. The steps for bridge mode are to access the advanced setup, edit the VPI/VCI settings, select bridge service and encapsulation type, enable the bridge service, save and reboot. The steps for PPPoE mode are similar but specify configuring a PPPoE username, password and service name instead of bridge settings.
Copyright:
Attribution Non-Commercial (BY-NC)
Formati disponibili
Scarica in formato DOC, PDF, TXT o leggi online su Scribd
2. Klik WAN 3. Find VPI/VCI: 8/81, Klik Edit 4. ATM PVC Configuration, VPI=0; VCI=35, Service Category: UBR Without PCR, Next 5. Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next 6. Cheklist Enable Bridge Service, Service Name: Speedy, Next 7. WAN Setup - Summary, Save 8. Save/Reboot
Setting PPPoE:
1. Klik Advanced Setup
2. Klik WAN 3. Find VPI/VCI: 8/81, Klik Edit 4. ATM PVC Configuration, VPI=0; VCI=35, Service Category: UBR Without PCR, Next 5. Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP- BRIDGING, Next 6. Put your PPP Username: nmrspeedy@telkom.net; PPP Password: (password dari telkom); PPPoE Service Name: Speedy, Next 7. Cheklist Enable WAN Service, Service Name: Speedy, Next 8. WAN Setup - Summary, Save 9. Save/Reboot