Gane” HOSOKAWA I\\iCRON POWDER SYSTEMS
MIKRO ACM CIP AIR CLASSIFIER MILL
with innovative CIP (clean in place) capabilities
Developed from the world’s leading air
classifier mill, the new Mikro ACM CIP
air classifier mill combines the traditional
features of ultrafine grinding and
classifying with innovative CIP (lean in
place) capabilites.
Interna view of Moo ACM CIP
‘The Mikro ACM CIP air classifier
mill offers all the benefits of reduced
owntime due to easy manual
dismantling and cleaning plus increased
operator/environmental safety. As
cleaning takes place within the mill,
Process Technologies For Tomorrow
‘operator contact with potentially toxic or
hazardous chemicals are minimised as is
product release to atmosphere.
Features
Suitable for batch production
Full validation procedure
Shock resistant to 11 bar
BH Low Noise
I Fine grinding to Dr - 10 microns
Total internal access
‘The Mikro ACM CIP sir classifier mill is
a high speed impact pulverizer with
tegral dynamic classifier and is
available in a range of sizes.
‘As a standard design philosophy, the new
‘Mikro ACM CIP incorporates explosion
protection, low noise, outstanding
accessibility and a high level of GMP.
‘The Mikro ACM is suitable for a wide
range of high performance milling
operations where an ultrafine material
with steep particle size distribution is
required,
Clean in Place
‘The CIP capability allows the mill wo be
filled with water, special cleaning fluid or
even some organic solvents, Agitation of
these fluids can be included if required,
CIP is traditionally problematic in milling
equipment, as rotating pars inside the
mill require the bearing assemblies to be
sealed to prevent ingress of cleaning
fluids and subsequent bearing damage.
A special sealing system developed by
Hosokawa, which is inoperative during
rnormal mill operation, is activated during
the CIP operation. Various methods of
agitating the fluid inside the mill can also
be included if required, Total internal
access is obtained by opening the hinged
‘outer chamber and lifting out the inner
stinging chamber.
ALPINE *
BEPEX* MKROSR
ETZ * STOTT * VITALAIR * VRIECO-NAUTAMikro ACM System
Nineteen mill types are available ranging
from 3 KW to 450 kW, The ACM CIP
for pharmaceutical applications is
currently available in models ACM 2, 5,
10 and 1.
Mikro ACM milling system van be
designed to process materials having a
dust explosion hazard using venting
relief. inert gas operation or fully
contained explosion shock pressure
resistant 11 bar designs.
‘The standard ACM series has been
augmented by special, easy clean designs
such as the Mikro ACM EC (easy clean)
and Mikro ACM. SB (split body)
versions developed for customers having
a requirement for ultra fast cleandowns
because of multiple product changes,
‘These EC and SB designs are available in
PSR 11 design as standard
A Mikro CC Classifier
Pharmaceutical Design
Complete validated systems can be
provided using highly polished stainless
steel Mikro ACM mls with intemal
finishes down to 0.2 Ra.
Hosokawa Standard Accessories
As part of a Mikro ACM system there is
a range of accessories which can be used
including rotary valves, cyclone
callectors, cyclone classifier, dust
collectors and the new high efficiency
Mikrocut air classifier.
Cyclone Collector
High efficiency cyclone designed to
obtain maximum product recovery. Ease
of access and cleanability are main
design features,
ACM SB >
BACH 10 PSR IE
iikro CC Classifier
‘Operating in ine with ACM mill system
to classify atthe coarse or fine ends to
produce quality powder with steep
Particle size distribution,
Filter
To work in conjunction with the Mikro
ACM CIP, Hosokawa have designed and
supplied a fully reverse jet filter with
sintered metal elements
‘The poliey of research and development
Continues and as part of the Hosokawa
Micron Group we ean offer our clients
‘unrivalled knowledge and expertise in
cesigning and engineering powder
processing systems,
> nosoxawa micron Powe systems
About Our Company:
For more than 80 years, Hosokawa
Micron Powder Systems has been a
single source provider of integrated
powder processing systems and compo-
nent machinery. Our business is based
on the concept that dealing with a
single source for specialized technolo-
gies provides better service and cost
effective solutions for our customers
‘We operate North America's most
comprehensive technical and pharma-
ceutical center for powder processing
technology. Here, we demonstrate
equipment for every process step
required to produce powdered products
and ingredients for use in simple to
complex applications.
Hosokawa Micron Powder Sytem,
10 Coatham Road, Summ, NJ O7901 U.S.A.
“Tel 1908 273 6360 Fax: 1 908 273 7832