Sei sulla pagina 1di 2
ARIS.30-P-T100EA, Page | of 2 AR15.30-P-7100EA Removing and installing starter in MODEL 202.022 in MODEL 202.023 in MODEL 202.024 ENGINE 104.941 in MODEL 202,028 1 Electic cable circuit 30 \ 2 Electric cable circu 50. 3 Screws 44 Bracket (model 202) : 5 Bracket (only engine 104 in model 202) “> 68 Bracket 7 Clipforacket (model 202) MY Starter Removing, installing Risk of explosion from explosive gas. Risk of poisoning and caustic burns ‘from swallowing battery electrolyte. Risk ‘of injury from caustic burns to eyes and skin from battery electrolyte or from handling damaged lead acid batteries, No fire, sparks, naked flames or smoking. | ASS4,10-2-0007-01A ‘Wear acid-protective gloves, clothin ‘eye protection, Pour bette ‘only into Suitable and appropriately marked containers © 2006 Mercedes-Benz USA, LLC ARLS.30-P-T100EA, 1 Disconnect ground cable of battery ARS4,10-P-00034 Remove battom engine compartment Model 202 AR61,20-P-11054B = Discomnecieciiocabies(2) [fm ~”~”~S~S™S™SCS~™~«*iRTB OP IOOT STA Remeve brackets (4, § and 7) Model 202, Unbalt rear engine mount at frame Engine 104 with automatic transmission in made 202 Tracew oer) le en soe Take starter (M1) down and out [Dengine 104 in modet 202: tum steering slightly to the left, Install in the reverse order ‘Carry out operational check Make electrical system operational Ciperton basic programming, AR00.18-P-0700G i TE ? z Designation Engine 104, 114 BAIS. 30-P-1001-018, BA15.90-P-1002-01A, Bol, ster to erankease [nm [ee © 2006 Mercedes-Benz USA, LLC Page 2 of 2

Potrebbero piacerti anche