Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
HB
http://www.brouwland.com/en/qr/057.108.HB
HopBlocker
Where traditional screen filters quickly plug with pellet hops and other fine break
material since they draw from the bottom of the pot and immediately suck all the
break material into the screens. For the HopBlocker, we utilized preferential
flow to leave the settled fine break material (hops and trub) undisturbed at the
bottom of the pot while draining the majority of the wort through a coarse filter
from the top down. When the wort level is just a couple cm from the bottom of the
pot, the fine filter element is then exposed by lifting the shield and the remainder
of the wort is filtered. This way, the fine filter only has to filter a small portion of the
wort instead of all of it. The HopBlocker will filter 90-95% of the break material
and hops out of your wort without plugging. While it is designed specifically for
BoilerMaker pots, it can be installed in any manufacturers pot or keg. Instructions
provided.
PLEASE NOTE: The HopBlocker is designed for use with PELLET hops
ONLY. Whole loose hope will PLUG the unit. For using with whole hops, or a mix
of whole and pellet hops, you need to bag your whole hops in a large muslin grain
bag. This will not affect the utilization rate and will result in significantly less wort
loss.
Specification
Packing dimensions and weight:
Weight
0.34 kg
Length
17 cm
Height
11 cm
Width
11 cm
Brouwland bvba
BE 0412.461.618
Korspelsesteenweg 86, 3581 Beverlo - Belgium
Tel. +32 11 40 14 08
Fax +32 11 34 73 59
Email info@brouwland.com
Web www.brouwland.com
Blichmann