Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Installation Instructions
0.3m(1ft) & 0.6m(2ft)
2
6
3
Notice
The installation, maintenance, or removal of antenna
systems requires qualified, experienced personnel.
Andrew installation instructions have been written for
such personnel. Antenna systems should be inspected
once a year by qualified personnel to verify proper
installation, maintenance, and condition of equipment.
Andrew disclaims any liability or responsibility for the
results of improper or unsafe installation practices.
3
Apply loctite (8) to
threads before
fitting to antenna
1a
3
1
Rotate to
adjust
elevation
Mount Assembly
Index
Antenna
offset right
Antenna
offset left
Description
Qty
1
1
3*
4*
4*
4*
4*
1*
Andrew Corporation
Telephone: 708/349-3300
FAX (U.S.A.): 1-800/349-5444
TELEX: 25-3897
Fastener
size
Size
Stainless
steel
Galvanized
steel
M12
65.1
(48)
38
(28)
M16
161
(118.7)
95
(70.1)
Warning: Use protective wear to avoid skin contact with the pre-applied
conductive grease on threads. Keep away from mouth. Wash thoroughly
after use with liberal amounts of liquid soap and rinse with water. Do not store
open near food or food sources. Dispose of empty or partially filled containers
according to governmental regulations for petroleum products. Contents: oil,
clay, and zinc dust.