Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Instructions
Configure the routers in the topology according to the diagram and the
specifications below. The T3 and T1 designations are simply labels; you do not
need to change the bandwidth or clockrate on the interfaces to reflect a speed
difference.
1-2
Requirements
2-2
Instructions
Configure the routers according to the above diagram and the requirements
below.
Requirements
1-2
2-2
Configure OSPF area 0 on the link between R1 and R2. Also add the loopback
interfaces on R1 into area 0.
Have R3 redistribute its connected routes into EIGRP.
Make sure all loopback interfaces are advertised with the correct mask.
Have R2 originate a default route into the OSPF domain.
Redistribute OSPF into EIGRP.
Filter out 172.16.120.0 and 172.16.121.0 from being advertised to R3.
Configure R2 and R3 in BGP AS 65100. Configure R4 in BGP AS 65400.
Peer R2 and R3 in BGP on their loopback interfaces.
Peer R3 and R4 in BGP.
Have R4 advertise its loopback interfaces into BGP.
Configure R3 to filter out 172.31.8.0 and 172.31.12.0 on the inbound updates
from R4.
Configure R4 with a static route to the 172.16.0.0/16 network via R3.