Se. INSTRUCTION MANUAL
DF SERIES CONTINUOUS FEEDING CHINESE
HERBS GRINDING MACHINE
DF- 55
ie 1135
Thank you for purchasing this grinding machine.
Please read this manual thoroughly before making connections.
Following the instruction in this manual will enable you to obtain
optimum performance.Please retain this manual for future reference.1, Air Inlet
4. Grinding Tooth
1, Electric Motor
10, Wetal al
12, Lock Screw
14, It is hot to protect the Machine
SPECIFICATION:
Model
DF-15
DF-20 |
DF-25
DF-30
DF-35
DF-40
loy knife
2, Feeding
5, Air Outlet
8 Electric AMP Meter
it
13, Switch
Productivity | Voltage
V)
(kglhour) W)
5.15 | 220/110
6.20 20/110
125 220/110
8.30 220/110
9.35 220/110
15.40 220/110
Power RotateSpeed Wei
(kg)
(W)
1000
1200
1500
1500
1800
1800
(vim)
12000
2840
2840
5600
2840
5600
3, Cover
6, Powder Outlet
9, Base
It is tiny to move the switch
12
25
28
37
40
50
ight
)
Carton Size
(cm)
30x17x40
5017x855
33x33x80
40x40x90
42x42x100
45x45x100NOTICE:
1. Before start the machine, make sure there is nothing remain in
the grinding chamber, and then plug into the electric outlet.
Close the cover and lock the lock screw on the cover.
. Switch on the machine and start the motor, and the feed the
raw material into the feeding. The herbs could not be feed too
fast and too much.
en
-
. If the knife is blocked and the motor could not rotate, please
switch off immediately, to avoid the damage of the motor. And
clear the blocking herbs and the restart the machine.
a
. When the machine is working, open the cover or send finger
into the grinding chamber is FORBIDDEN.
. This machine is used for dry herbs, and not fit for wet and oil
herbs.
7. The user should change the filter according the different
requirement.
roy
8. The machine has an overheated protector. If the motor over
load, it will be stopped automatically. Push the overheated
protector and restart the machine.
SPARE PARTS:
(1) 1 pe of Bag
(2) Net 2 sets