Sei sulla pagina 1di 1

GE6152 / Engineering Graphics / Unit-1

Assignment-1
1. (a) The distance between a fixed point and fixed straight line is 40mm & eccentricity of
the curve is 3/2. Draw the curve also draw a tangent and normal 70mm from the
directrix line.
(b) Construct a parabola when the distance between directrix and focus is 40mm. Also
draw a tangent and normal 30mm below the axis line.
2. A coir is unwound from a drum of 30mm diameter. Draw the locus of the free end of the
coir for unwinding through an angle of 3600. Also draw a normal and tangent at any
point on the curve.
3. A coin of 40mm diameter rolls over a horizontal table without slipping. A point on the
circumference of the coin is in contact with the table surface in the beginning and after
one complete revolution. Draw the path traced by the point. Also draw a tangent and
normal at any point on the curve.
4. Draw a hypocycloid of rolling circle 40mm diameter, which rolls inside another circle of
200mm diameter for one revolution. Draw a tangent and normal to the curve at a
distance of 80mm from the centre of the directing circle.
5. The distance between Delhi and Agra is 200 km. In a railway map it is represented by a
line 5cm long. Find its R.F. Draw a diagonal scale to show single km. And maximum
600 km. Indicate on it following distances. (1) 222 km (2) 336 km (3) 459 km
(4) 569 km

Potrebbero piacerti anche