soavans
Measuring Tip & Glossary - KYORITSU
“CKyoritsu fone
PRODUCTS SUPPORT
DOWNLOAD
‘ABOUT KYORITSU
Stan Earth Resistivity (p)
Measuring Tip &
Glossary
Ii Principle of Earth Resistivity (p) Measurement
+ Application Notes
According to the Wenner 4-pole method, apply AC
“General & Technical” ” current’ between the "E* (earth electrode) and "H(C)’
FAQ. (current electrode) to find out the potential difference
General 6sidiog "V" between the wo potential electrodes "S(P)" and
request "ES"
To obtain the earth resistance "Rg (2), devide the
“Contact Us.
potential difference "V" by AC current’; where the
distance between electrodes is "a" (m). Then use the
formula: p=2++a+Rg (0m)
Il Measurement method
Stick the four Auxiliary Earth Spikes into the ground
deeply. They should be aligned at an interval of 1-
30m(a). The depth should be 5% or less ofthe interval
between the spikes.
Note) ‘The supplied Test Leads can be used for the
distance between the spikes up to 20m.
Earth Resistance
Ili Principle of Earth Resistance Measurement
This instrument makes earth resistance measurements
with fal-of-potential method, which is a method to
obiain earth resistance value "Rx" by applying AC
constant current" between the measurement object,
“E" (earth electrode) and "H(C)" (current electrode), and
finding autthe potantal difference "V" betweon "="
(earth electrode) and "S(P)" (potential electrode),
Hi Simplified Measurement (2-Wire)
2.Wire Earth Resistance Measurement
Ill Precise Measurement (4-Wire)
hip kewltd.cojplensupportimame_ 04 himidmame00t
‘Connection for Earth Resistivity Measurement
&
Rx(Q)=Vil
ise Measurement (3-Wire)
Earthed Electrode
Auxiliary
‘under Test
eath spies
3-Wire Earth Resistance Measurement
12soavans Measuring Tip & Glossary - KYORITSU
Earhed Electrode Auxany
uncer vest ‘eat spines
4-Wire Earth Resistance Measurement
‘Copytight(c)2008 KYORITSU ELECTRICAL INSTRUMENTS WORKS, LTD.
hip kewltd.cojplensupportimame_ 04 himidmame00t
‘Stemap | Contact Us | Terms of Use| Privacy Poley
22