ana2ois Compex Tearing FAQ.
Back to Hazardous Locations (/hazardous-locations/) Share
CompEx Training FAQ
CompEx is a nationally recognized qualification supported by the HSE,
NICEIC and EEMUA, and is fast becoming a mandatory requirement on
many plants. CompEx is the only nationally recognized course and
qualification in explosive atmospheres installation and inspection.
It provides competence based training and assessment for electrical and instrumentation technicians
working in hazardous areas in offshore and onshore industrial environments.
Below are some answers to Frequently Asked Questions about CompEx Training
How are the units taken?
Intertek provides the following units as these are the most frequently requested by sites with explosive
atmospheres.
‘+ Compex Full Course Gas & Vapours, units EXO1 - EX04: For Technicians (electrical and
instrumentation} who may be called on to work in potentially explosive gas atmospheres
‘* CompEx Dust Course, units EX05 - EXO6: For Technicians (electrical and instrumentation) who may be
called on to work in potentially explosive dust atmospheres only
+ CompEx Refresher Course: This course is mandatory within S years of gaining your Compex
Qualification. IF you do not do the refresher (and pass the test), you willno longer be qualified 'CompEx’
This course can also be taken as an overview of Explosive Atmosphere Installation and Inspection
‘* CompEx Exam Only: One or two days of tests and assessments (depending on the units covered) to
the CompEx assessment criteria including a theory paper, practical installation and practical
inspections, Only recommended for trained, experienced installers
Who is the course aimed at?
Electro-technical personnel who need to develop and demonstrate their competency in the selection,
installation, inspection and maintenance of electrical apparatus in potentially explosive atmospheres, through
a nationally industry recognized and certificated training and assessment scheme,
What subjects are covered?
Subjects covered include: are:
ratings; impact protection and
lassification; temperature classification; gas groups; dust protection, IP
other environmental influences; ignition sources; marking and identification;
legislation; directives and standards; earthing; bonding; protection methods in detail; Ex'd, Ex'e', Ex'r’, Ex’p’
Ex’, Ex’), Ex’o', Ex'a’; dust protection by enclosure; wiring systems and glanding; installation, maintenance,
inspection and testing
How will | be assessed?
The assessments are both practical and written and can take two days to complete, and follow on
immediately from the training, Each candidate is required to demonstrate competence through a series of
practical tests and written multi-choice test papers, with successful candidates receiving a Compex Certificate
of Core Competence.
tp tower ierek comihazerdou-lcatontraintelcompextog 10ana2ois Compex Tearing FAQ.
Where will | need to go to be trained or assessed?
Our approved Compéx licensed center is located near the historic city of Chester, UK. For companies outside
of the UK who are not able to travel to Chester, we are able to offer CompEx training and assessment
through the use of our mobile rigs.
What is DSEAR?
DSEAR stands for the Dangerous Substances and Explosive Atmospheres Regulations and these put duties
‘on employers and the self-employed to protect people from risks to their safety from fires, explosions and
similar events in the workplace - including members of the public who may be put at risk by work activity
Need help or have a question?
Have a Question?
+86 400 886 9926 more
Hazardous Locations 0)
North American Approvals (hazardous-locations/north-american-approvals)
[ATEX Directive for Europe (/hazardous-locations/atex-certifiation/)
IECEx System for Global Market (/hazardous-locations/iecex-schemne/)
Protection Methods (hazardous-locations/protection-methods/)
Preliminary Evaluation (/hazardous-locations/preliminary-evaluation/)
Technical Services V/hazardous-locations/technical-services/)
‘Training Program (/hazardous-locations/training/)
Resources
Accelerated Stress Testing (AST) Webinar Recording: ‘Success through Failure’ (/testing/acclerated-
stress-testing-webinar-recording/)
Guide to Equipment Certification Requirements for Hazardous Locations Poster (/hazardous-
locations/hazloc-poster-0714-web/)
Ex Application Form
(JuploadedFiles/Intertek/Divisions/Commercial_and_Electrical/Media/PDF/Hazardous_Locations/Request
for Quote 1.pdf)
Bundled Certifications Calculator (/hazardous-locations/equipment-certification-poster/)
Read More (/hazardous-locations/resources/)
Events
Intertek Atlanta Seminars
Aug. 12, 2015 - Register (/products-retail/safety-emc-software-serninar-atlanta-web/)
itp irtertek com/hazardous-locatonshrainirafcom penta 28ana2ois Compex Tearing FAQ.
EU REACH Regulation & Compliance Free Seminar
Aug. 27, 2015 - Register (/products-retail/eu-reach-regulation-seminar-fairview/)
North America: Year-round CompEx Course Schedule (/construction-engineering/north-american-
compexctraining-services/)
Intertek Chester UK facility (/training/uk/) including CompEx course (/hazardous-
locations/compex/chester-uk/) modules and descriptions
Offshore Europe 2015 8-11 September, Aberdeen, UK (http://www. offshore-
‘europe.co.uk/en/Exhibitors/44901 1/Intertek?exld=44901 1)
Find Intertek at more shows by visiting Wherels.Intertek.com (http://whereis.intertek.com)
Related Links
Field Evaluation (/field-labeling/)
On-site Design Review (/hazardous-locations/preliminary-evaluation/on-site-assessment/)
Certification Program for Industrial Control Panels (ICP) (/industrial-equipment/certification-
program-for-control-panels/)
EMC Testing (/emc/)
ETL Mark (/marks/etl/)
Read More (/hazardous-locations/related-links/)
Industries (/industries/) knowledge (/knowledge- o
About Us (/about/) education)
Locations (/contact/)
Intertek Group ple
Disclaimer (/legal/) Terms (/terms/ Privacy (/privacy Cookies (/cookie-policy/)
Client Portals (/client-portals/)
itp irtertek com/hazardous-locatonshrainirafcom penta
38