Sei sulla pagina 1di 14

PETROVIETNAM LOW PRESSURE GAS DISTRIBUTION

JOINT STOCK COMPANY

PROJECT

TIEN HAI THAI BINH LOW PRESSURE GAS DISTRIBUTION


PIPELINE SYSTEM

PHASE

DEHYDRATION

MAGNETIC LEVEL GAUGE


WITH LEVEL TRANSMITTER

26/12/2014

Approval for
construction

TVN

LDB

NHC

22/12/2014

Approval for
construction

TVN

LDB

NHC

12/12/2014

Issued for Review

TVN

LDB

NHC

Prepared by

Checked by

Rev

Date

Description
Contractor:

ALPHA ECC

Alpha-ECC

Approved by Checked by Approved by


PVGAS D

Contractors Document Number:

KTA.TB-PAC03-J13-005
Total pages: 5
(Incl. this page)

CUSTOMER

: PVGAS D

ITEM/TAG No. LG-0133/LZT-0133

LOCATION

: VIETNAM

DATA SHEET No. KTA.TB-PAC03-J13-005.02

AREA

: BLOCK 102 & 106 - PHASE 1

PROJECT No.

PROJECT

: TB-HR LPGD PIPELINE SYSTEM

SHEET

1 OF 4

INSTRUMENT DATA SHEET

OTHER

TRANSMITTER

INDICATOR

FLOAT MATERIAL

PROCESS DETAILS

GENERAL

MAGNETIC LEVEL GAUGE WITH LEVEL TRANSMITTER

NOTES :

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47

Tag No.
Service
P&ID No.
Line/Vessel No.
Hazardous Area Classification
Quantity
Fluid
Phase
Operating pressure
Operating temperature
Design pressure
Design Temperature
Operating differential Pressure
Liquid (mixture) density
Body or Chamber Material
Magnetic Follower/Float Material
Flange Material
Flange Rating
Process Connection Type
Conn Size & Location : Upper
Conn Size & Location : Lower
Vent / Drain Conn. Type & Size
Visible Length
Center To Center Distance
Indicator Type
Indicator Scale
Indicator Scale Material
Manufacturer
Model No.
Service
Function
Range
Output
Supply Voltage
Accuracy
Output Action
Mounting
Enclosure: Material
Class
Contacts : No.
Form
Conduit Connection
Ex Certification
Mounting
Drain and Vent Valves:
Valve material/Material
Bolt/Nut
1.
2.
3.
4.
5

LG-0133/LZT-0133
Flash Vessel
KTA.TB-PAC03-M07-003
V-101
ZONE 2 , GROUP IIA, T3
1 (One)

Barg
C
Barg
C
mBar
Kg/m3

TEG
Liquid
3.9
70
10
100
N/A
1079
316SS
316SS
316SS
ASME 150# RF WN
Flanged
DN50, Side
DN50, Side
Flanged 150# RF, DN 20
1500 mm
1500 mm
Fluorescent Shuttle with Hermetically Sealed Glass Tube
Rev. C
Graduated in % & cm
316 SS
VTA
VTA
Magnetic Level Gauge and Level Transmitter
Indicate/Transmit
0-100% & cm
4-20 mA (2-wire), HART comm. Protocol.
24 V DC
0.075% of full span
Increase
Integral Low
Aluminium (Note 5)
M20x1.5
EEx:ia IIB T4
Direct Mounted (Bottom)
3/4" 150# WNRF FLAGNE+BLIND FLAGNE
Rev. C
Gate / SS316
See note 10

Insulation support/clip shall be provided by Vendor for insulation installed by Purchaser.


Refer to P&ID
Transmitter shall be supplied with 316 SS, Ex i, ATEX certified plugs for all spare cable entries
The rolling magnet type of indication with red and yellow follower.
Transmitter enclosure/ casing/ junction box shall be epoxy-coated low copper aluminium.

IP65

CUSTOMER

: PVGAS D

ITEM/TAG No. LG-0142/LZT-0142

LOCATION

: VIETNAM

DATA SHEET No. KTA.TB-PAC03-J13-005.02

AREA

: BLOCK 102 & 106 - PHASE 1

PROJECT No.

PROJECT

: TB-HR LPGD PIPELINE SYSTEM

SHEET

2 OF 4

INSTRUMENT DATA SHEET

OTHER

TRANSMITTER

INDICATOR

FLOAT MATERIAL

PROCESS DETAILS

GENERAL

MAGNETIC LEVEL GAUGE WITH LEVEL TRANSMITTER

NOTES :

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
49
1.
2.
3.
4.
5

LG-0142/LZT-0142

Tag No.
Service
P&ID No.
Line/Vessel No.
Hazardous Area Classification
Quantity
Fluid
Phase
Operating pressure
Operating temperature
Design pressure
Design Temperature
Operating differential Pressure
Liquid (mixture) density
Body or Chamber Material
Magnetic Follower/Float Material
Flange Material
Flange Rating
Process Connection Type
Conn Size & Location : Upper
Conn Size & Location : Lower
Vent / Drain Conn. Type & Size
Visible Length
Center To Center Distance
Indicator Type
Indicator Scale
Indicator Scale Material
Manufacturer
Model No.
Service
Function
Range
Output
Supply Voltage
Accuracy
Output Action
Mounting
Enclosure: Material
Class
Contacts : No.
Form
Conduit Connection
Ex Certification
Mounting
Drain and Vent Valves:
Valve type/Material
Bult/Nut

Glycol Surge Drum


KTA.TB-PAC03-M07-004
V-103
ZONE 2 , GROUP IIA, T3
1 (One)

Barg
C
Barg
C
mBar
Kg/m3

TEG
Liquid
0.20
43-93.4
7.5
100
N/A
1066.1
316SS
316SS
316SS
ASME 150# RF WN
Flanged
DN50, Side
DN50, Side
Flanged 150# RF, DN 20
1900 mm
1900 mm
Fluorescent Shuttle with Hermetically Sealed Glass Tube
Rev. C
Graduated in % & cm
316 SS
VTA
VTA
Magnetic Level Gauge and Level Transmitter
Indicate/Transmit
0-100% & cm
4-20 mA (2-wire), HART comm. Protocol.
24 V DC
0.075 of full span
Increase
Integral Low
Aluminium (Note 5)
IP65
M20x1.5
EEx:ia IIB T4
Direct Mounted (Bottom)
3/4" 150# WNRF FLAGNE + BLIND FLAGNE
Rev. C
Gate / SS316

See note 10
Insulation support/clip shall be provided by Vendor for insulation installed by Purchaser.
Refer to P&ID
Transmitter shall be supplied with 316 SS, Ex i, ATEX certified plugs for all spare cable entries
The rolling magnet type of indication with red and yellow follower.
Transmitter enclosure/ casing/ junction box shall be epoxy-coated low copper aluminium.

CUSTOMER

: PVGAS D

ITEM/TAG No. LG-0172/LZT-0172

LOCATION

: VIETNAM

DATA SHEET No. KTA.TB-PAC03-J13-005.02

AREA

: BLOCK 102 & 106 - PHASE 1

PROJECT No.

PROJECT

: TB-HR LPGD PIPELINE SYSTEM

SHEET

3 OF 4

INSTRUMENT DATA SHEET

OTHER

TRANSMITTER

INDICATOR

FLOAT MATERIAL

PROCESS DETAILS

GENERAL

MAGNETIC LEVEL GAUGE WITH LEVEL TRANSMITTER

NOTES :

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
49
1.
2.
3.
4.
5

LG-0172/LZT-0172

Tag No.
Service
P&ID No.
Line/Vessel No.
Hazardous Area Classification
Quantity
Fluid
Phase
Operating pressure
Operating temperature
Design pressure
Design Temperature
Operating differential Pressure
Liquid (mixture) density
Body or Chamber Material
Magnetic Follower/Float Material
Flange Material
Flange Rating
Process Connection Type
Conn Size & Location : Upper
Conn Size & Location : Lower
Vent / Drain Conn. Type & Size
Visible Length
Center To Center Distance
Indicator Type
Indicator Scale
Indicator Scale Material
Manufacturer
Model No.
Service
Function
Range
Output
Supply Voltage
Accuracy
Output Action
Mounting
Enclosure: Material
Class
Contacts : No.
Form
Conduit Connection
Ex Certification
Mounting
Drain and Vent Valves:
Valve type/Material
Bolt/Nut

Flash Vessel
KTA.TB-PAC03-M07-007
V-104
ZONE 2 , GROUP IIA, T3
1 (One)

Barg
C
Barg
C
mBar
Kg/m3

Water
Liquid
0.30
37
7.5
100
N/A
993.4
316SS
316SS
316SS
ASME 150# RF WN
Flanged
DN50, Side
DN50, Side
Flanged 150# RF, DN 20
800 mm
800 mm
Fluorescent Shuttle with Hermetically Sealed Glass Tube
Rev. C
Graduated in % & cm
316 SS
VTA
VTA
Magnetic Level Gauge and Level Transmitter
Indicate/Transmit
0-100% & cm
4-20 mA (2-wire), HART comm. Protocol.
24 V DC
0.075% of full span
Increase
Integral Low
Aluminium (Note 5)
IP65
M20x1.5
EEx:ia IIB T4
Direct Mounted (Bottom)
3/4" 150# WNRF FLAGNE + BLIND FLAGNE
Rev. C
Gate / SS316
See note 10

Insulation support/clip shall be provided by Vendor for insulation installed by Purchaser.


Refer to P&ID
Transmitter shall be supplied with 316 SS, Ex i, ATEX certified plugs for all spare cable entries
The rolling magnet type of indication with red and yellow follower.
Transmitter enclosure/ casing/ junction box shall be epoxy-coated low copper aluminium.

CUSTOMER

: PVGAS D

ITEM/TAG No. LG-0111/ LIT-0111

LOCATION

: VIETNAM

DATA SHEET No. KTA.TB-PAC03-J13-005.02

AREA

: BLOCK 102 & 106 - PHASE 1

PROJECT No. AL-3098

PROJECT

: TB-HR LPGD PIPELINE SYSTEM

SHEET

VALVES SPECIFICATION
INSTRUMENT

1 OF 10

DATA SHEET

MAGNETIC LEVEL GAUGE WITH LEVEL TRANSMITTER

OTHER

TRANSMITTER

INDICATOR

FLOAT MATERIAL

PROCESS DETAILS

GENERAL

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
30
34
35
36
37
38
39
NOTES :
1.
2.
3.
4.
5

Tag No.
Service
P&ID No.
Line/Vessel No.
Hazardous Area Classification
Quantity

LG-0111/LIT-0111
Glycol Contactor C-101
KTA.TB-PAC03-M07-001
C-101
ZONE 2, GROUP IIA, T3
1 (One)

TEG
Fluid
Liquid
Phase
11.8 - 33.57
Operating pressure
Barg
17.3 - 42.3
Operating temperature
C
40
Design pressure
Barg
65
Design Temperature
C
N/A
mBar
Operating differential Pressure
1093.5
Liquid (mixture) density
Kg/m3
9.41
Vapour density
Kg/m3
Body or Chamber Material
316 SS
Magnetic Follower/Float Material
316 SS
Flange Material
316 SS
Flange Rating
ASME 600# RF WN
Process Connection Type
Flanged
Conn Size & Location : Upper
DN50, Side
Conn Size & Location : Lower
DN50 Side
Vent / Drain Conn. Type & Size
Flanged 600# RF, DN 20
Visible Length
1320mm
Center To Center Distance
1320mm
Fluorescent Shuttle with Hermetically Sealed Glass Tube
Indicator Type
Rev. C
Indicator Scale
Graduated in % & cm
Indicator Scale Material
316 SS
Function
VTA
Manufacturer
VTA
Model No.
Magnetic Level Gauge and Level Transmitter
Service
Indicate/Transmit
Function
0-100% & cm
Range
4-20 mA (2-wire), HART comm. Protocol.
Output
24 V DC
Supply Voltage
0.075% of full span
Accuracy
Increase
Output Action
Integral Low
Mounting
Aluminium (Note 5) IP65
Enclosure: Material
Class
Contacts : No.
Form
M20x1.5
Conduit Connection
EEx:ia IIB T4
Ex Certification
Direct Mounted (Bottom )
Mounting
3/4" 600# WNRF FLAGNE +BLIND FLAGNE
Drain and Vent Valves:
Rev. C
Gate / SS316
Valve type / Material
See Note 10
Bolt/Nut
Insulation support/clip shall be provided by Vendor for insulation installed by Purchaser.
Refer to P&ID
Transmitter shall be supplied with 316 SS, Ex i, ATEX certified plugs for all spare cable entries
The rolling magnet type of indication with red and yellow follower.
Transmitter enclosure/ casing/ junction box shall be epoxy-coated low copper aluminium.

CUSTOMER

: PVGAS D

ITEM/TAG No. LG-0114/LIT-0114

LOCATION

: VIETNAM

DATA SHEET No. KTA.TB-PAC03-J13-005.02

AREA

: BLOCK 102 & 106 - PHASE 1

PROJECT No. AL-3098

PROJECT

: TB-HR LPGD PIPELINE SYSTEM

VALVES SPECIFICATION
INSTRUMENT

SHEET

2 OF 10

DATA SHEET

MAGNETIC LEVEL GAUGE WITH LEVEL TRANSMITTER

OTHER

TRANSMITTER

INDICATOR

FLOAT MATERIAL

PROCESS DETAILS

GENERAL

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
NOTES :
1.
2.
3.
4.
5

LG-0114/LIT-0114
Glycol Contactor C-101
KTA.TB-PAC03-M07-001
C-101
ZONE 2, GROUP IIA, T3
1 (One)

Tag No.
Service
P&ID No.
Line/Vessel No.
Hazardous Area Classification
Quantity
Fluid
Phase
Operating pressure
Operating temperature
Design pressure
Design Temperature
Operating differential Pressure
Liquid (mixture) density
Vapour density
Body or Chamber Material
Magnetic Follower/Float Material
Flange Material
Flange Rating
Process Connection Type
Conn Size & Location : Upper
Conn Size & Location : Lower
Vent / Drain Conn. Type & Size
Visible Length
Center To Center Distance
Indicator Type
Indicator Scale
Indicator Scale Material
Manufacturer
Model No.
Service
Function
Range
Output
Supply Voltage
Accuracy
Output Action
Mounting
Enclosure: Material
Contacts : No.
Conduit Connection
Ex Certification
Mounting
Drain and Vent Valves:
Valve type/ Material
Bolt/Nut

Hydrocarbon
Liquid
13.7
34.6 - 36.4
40
65
N/A
716.1 - 994.9
9.41

Barg
C
Barg
C
mBar
Kg/m3
Kg/m3

316 SS
316 SS
316 SS
ASME 600# RF WN
Flanged
DN50, Side
DN50 Side
Flanged 600# RF, DN 20
900mm
900mm
Fluorescent Shuttle with Hermetically Sealed Glass Tube

Rev. C

Graduated in % & cm
316 SS

VTA
VTA
Magnetic Level Gauge and Level Transmitter
Indicate/Transmit

Class
Form

0-100% & cm
4-20 mA (2-wire), HART comm. Protocol.
24 V DC
0.075% of full span
Increase
Integral Low
Aluminium (Note 5) IP65
M20x1.5
EEx:ia IIB T4
Direct Mounted (Bottom / Top)
3/4" 600# WNRF FLAGNE + BLIND FLAGNE
Rev. C
Gate / SS316
See note 10

Insulation support/clip shall be provided by Vendor for insulation installed by Purchaser.


Refer to P&ID
Transmitter shall be supplied with 316 SS, Ex i, ATEX certified plugs for all spare cable entries
The rolling magnet type of indication with red and yellow follower.
Transmitter enclosure/ casing/ junction box shall be epoxy-coated low copper aluminium.

CUSTOMER

: PVGAS D

ITEM/TAG No. LG-0113/LZT-0113

LOCATION

: VIETNAM

DATA SHEET No. KTA.TB-PAC03-J13-005.02

AREA

: BLOCK 102 & 106 - PHASE 1

PROJECT No. AL-3098

PROJECT

: TB-HR LPGD PIPELINE SYSTEM

SHEET

VALVES SPECIFICATION
INSTRUMENT

3 OF 10

DATA SHEET

MAGNETIC LEVEL GAUGE WITH LEVEL TRANSMITTER

OTHER

TRANSMITTER

INDICATOR

FLOAT MATERIAL

PROCESS DETAILS

GENERAL

1
2
3
4
5
6
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
NOTES :
1.
2.
3.
4.
5

Tag No.
Service
P&ID No.
Line/Vessel No.
Hazardous Area Classification
Quantity
Fluid
Phase
Operating pressure
Operating temperature
Design pressure
Design Temperature
Operating differential Pressure
Liquid (mixture) density
Vapour density
Body or Chamber Material
Magnetic Follower/Float Material
Flange Material
Flange Rating
Process Connection Type
Conn Size & Location : Upper
Conn Size & Location : Lower
Vent / Drain Conn. Type & Size
Visible Length
Center To Center Distance
Indicator Type
Indicator Scale
Indicator Scale Material
Manufacturer
Model No.
Service
Function
Range
Output
Supply Voltage
Accuracy
Output Action
Mounting
Enclosure: Material
Contacts : No.
Conduit Connection
Ex Certification
Mounting
Drain and Vent Valves:
Valve type/Material
Bolt/Nut

Class
Form

Barg
C
Barg
C
mBar
Kg/m3
Kg/m3

LG-0113/LZT-0113
Glycol Contactor C-101
KTA.TB-PAC03-M07-001
C-101
ZONE 2, GROUP IIA, T3
1 (One)
TEG
Liquid
11.8 - 33.57
17.3 - 42.3
40
65
N/A
1093.5
9.41
316 SS
316 SS
316 SS
ASME 600# RF WN
Flanged
DN50, Side
DN50 Side
Flanged 600# RF, DN 20
1270mm
1270mm
Fluorescent Shuttle with Hermetically Sealed Glass Tube

Rev. C Graduated in % & cm


316 SS
VTA
VTA
Magnetic Level Gauge and Level Transmitter
Indicate/Transmit
0-100% & cm
4-20 mA (2-wire), HART comm. Protocol.
24 V DC
0.007% of full span
Increase
Integral Low
Aluminium (Note 5) IP65
M20x1.5
EEx:ia IIB T4
Direct Mounted (Bottom )
3/4" 600# WNRF FLAGNE+BLIND FLAGNE
Rev. C Gate / SS316
See note 10

Insulation support/clip shall be provided by Vendor for insulation installed by Purchaser.


Refer to P&ID
Transmitter shall be supplied with 316 SS, Ex i, ATEX certified plugs for all spare cable entries
The rolling magnet type of indication with red and yellow follower.
Transmitter enclosure/ casing/ junction box shall be epoxy-coated low copper aluminium.

CUSTOMER

: PVGAS D

ITEM/TAG No. LG-0114/LZT-0114

LOCATION

: VIETNAM

DATA SHEET No. KTA.TB-PAC03-J13-005.02

AREA

: BLOCK 102 & 106 - PHASE 1

PROJECT No. AL-3098

PROJECT

: TB-HR LPGD PIPELINE SYSTEM

VALVES SPECIFICATION
INSTRUMENT

SHEET

4 OF 10

DATA SHEET

MAGNETIC LEVEL GAUGE WITH LEVEL TRANSMITTER

OTHER

TRANSMITTER

INDICATOR

FLOAT MATERIAL

PROCESS DETAILS

GENERAL

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
NOTES :
1.
2.
3.
4.
5

LG-0114/LZT-0114
Glycol Contactor C-101
KTA.TB-PAC03-M07-001
C-101
ZONE 2, GROUP IIA, T3
1 (One)

Tag No.
Service
P&ID No.
Line/Vessel No.
Hazardous Area Classification
Quantity
Fluid
Phase
Operating pressure
Operating temperature
Design pressure
Design Temperature
Operating differential Pressure
Liquid (mixture) density
Vapour density
Body or Chamber Material
Magnetic Follower/Float Material
Flange Material
Flange Rating
Process Connection Type
Conn Size & Location : Upper
Conn Size & Location : Lower
Vent / Drain Conn. Type & Size
Visible Length
Center To Center Distance
Indicator Type
Indicator Scale
Indicator Scale Material
Manufacturer
Model No.
Service
Function
Range
Output
Supply Voltage
Accuracy
Output Action
Mounting
Enclosure: Material
Class
Contacts : No.
Form
Conduit Connection
Ex Certification
Mounting
Drain and Vent Valves:
Valve type / Material
Bolt/Nut

Hydrocarbon
Liquid
13.7
34.6 - 36.4
40
65
N/A
716.1 - 994.9
9.41

Barg
C
Barg
C
mBar
Kg/m3
Kg/m3

316 SS
316 SS
316 SS
ASME 600# RF WN
Flanged
DN50, Side
DN50 Side
Flanged 600# RF, DN 20
900mm
900mm
Fluorescent Shuttle with Hermetically Sealed Glass Tube

Rev. C

Graduated in % & cm
316 SS
VTA
VTA
Magnetic Level Gauge and Level Transmitter
Indicate/Transmit
0-100% & cm
4-20 mA (2-wire), HART comm. Protocol.
24 V DC
0.075% of full span
Increase
Integral Low
Aluminium (Note 5) IP65
M20x1.5
EEx:ia IIB T4
Direct Mounted (Bottom)
3/4" 600# WNRF FLAGNE + BLIND FLAGNE
Rev. C Gate / SS316
See note 10

Insulation support/clip shall be provided by Vendor for insulation installed by Purchaser.


Refer to P&ID
Transmitter shall be supplied with 316 SS, Ex i, ATEX certified plugs for all spare cable entries
The rolling magnet type of indication with red and yellow follower.
Transmitter enclosure/ casing/ junction box shall be epoxy-coated low copper aluminium.

CUSTOMER

: PVGAS D

ITEM/TAG No. LG-0131/LIT-0131

LOCATION

: VIETNAM

DATA SHEET No. KTA.TB-PAC03-J13-005.02

AREA

: BLOCK 102 & 106 - PHASE 1

PROJECT No. AL-3098

PROJECT

: TB-HR LPGD PIPELINE SYSTEM

SHEET

VALVES SPECIFICATION
INSTRUMENT

5 OF 10

DATA SHEET

FLOAT MATERIAL

PROCESS DETAILS

GENERAL

MAGNETIC LEVEL GAUGE WITH LEVEL TRANSMITTER


1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16

Tag No.
Service
P&ID No.
Line/Vessel No.
Hazardous Area Classification
Quantity

LG-0131/LIT-0131
Flash Vessel
KTA.TB-PAC03-M07-003
V-101
ZONE 2, GROUP IIA, T3
1 (One)

Fluid
Phase
Operating pressure
Operating temperature
Design pressure
Design Temperature
Operating differential Pressure
Liquid (mixture) density
Vapour density

Hydrocarbon
Liquid
3.9
70
10
100
N/A
700
4.75

17
18
19
20
21
22
23
24

Body or Chamber Material


Magnetic Follower/Float Material
Flange Material
Flange Rating
Process Connection Type
Conn Size & Location : Upper
Conn Size & Location : Lower
Vent / Drain Conn. Type & Size

OTHER

TRANSMITTER

INDICATOR

25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
45
46
47
48
49
NOTES :
1.
2.
3.
4.
5

Visible Length
Center To Center Distance
Indicator Type
Indicator Scale
Indicator Scale Material
Manufacturer
Model No.
Service
Function
Range
Output
Supply Voltage
Accuracy
Output Action
Mounting
Enclosure: Material
Contacts : No.
Conduit Connection
Ex Certification
Mounting
Drain and Vent Valves:
Valve type/Material
Bolt/Nut

Barg
C
Barg
C
mBar
Kg/m3
Kg/m3

316 SS
316 SS
316 SS
ASME 150# RF WN
Flanged
DN50, Side
DN50 Side
Flanged 150# RF, DN 20
850mm
850mm
Fluorescent Shuttle with Hermetically Sealed Glass Tube

Rev. C

Class
Form

Graduated in % & cm
316 SS
VTA
VTA
Magnetic Level Gauge and Level Transmitter
Indicate/Transmit
0-100% & cm
4-20 mA (2-wire), HART comm. Protocol.
24 V DC
0.075% of full span
Increase
Integral Low
Aluminium (Note 5) IP65
M20x1.5
EEx:ia IIB T4
Direct Mounted (Bottom / Top)
3/4" 600# WNRF FLAGNE + BLIND FLAGNE
Rev. C Gate / SS316
See note 10

Insulation support/clip shall be provided by Vendor for insulation installed by Purchaser.


Refer to P&ID
Transmitter shall be supplied with 316 SS, Ex i, ATEX certified plugs for all spare cable entries
The rolling magnet type of indication with red and yellow follower.
Transmitter enclosure/ casing/ junction box shall be epoxy-coated low copper aluminium.

CUSTOMER

: PVGAS D

ITEM/TAG No. LG-0132/LIT-0132

LOCATION

: VIETNAM

DATA SHEET No. KTA.TB-PAC03-J13-005.02

AREA

: BLOCK 102 & 106 - PHASE 1

PROJECT No. AL-3098

PROJECT

: TB-HR LPGD PIPELINE SYSTEM

SHEET

VALVES SPECIFICATION
INSTRUMENT

6 OF 10

DATA SHEET

MAGNETIC LEVEL GAUGE WITH LEVEL TRANSMITTER

OTHER

TRANSMITTER

INDICATOR

FLOAT MATERIAL

PROCESS DETAILS

GENERAL

1
2
3
4
5
6
8
9
10
11
12
13
14
15
16
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
NOTES :
1.
2.
3.
4.
5

LG-0132/LIT-0132
Tag No.
Flash Vessel
Service
KTA.TB-PAC03-M07-003
P&ID No.
V-101
Line/Vessel No.
ZONE 2, GROUP IIA, T3
Hazardous Area Classification
1 (One)
Quantity
TEG
Fluid
Liquid
Phase
3.9
Operating pressure
Barg
70
Operating temperature
C
10
Design pressure
Barg
100
Design Temperature
C
N/A
mBar
Operating differential Pressure
1079
Liquid (mixture) density
Kg/m3
4.75
Vapour density
Kg/m3
Body or Chamber Material
316 SS
Magnetic Follower/Float Material
316 SS
Flange Material
316 SS
Flange Rating
ASME 150# RF WN
Process Connection Type
Flanged
Conn Size & Location : Upper
DN50, Side
Conn Size & Location : Lower
DN50 Side
Vent / Drain Conn. Type & Size
Flanged 150# RF, DN 20
Visible Length
1500mm
Center To Center Distance
1500mm
Fluorescent Shuttle with Hermetically Sealed Glass Tube
Indicator Type
Rev. C Graduated in % & cm
Indicator Scale
Indicator Scale Material
316 SS
VTA
Manufacturer
VTA
Model No.
Magnetic Level Gauge and Level Transmitter
Service
Indicate/Transmit
Function
Range
0-100% & cm
4-20 mA (2-wire), HART comm. Protocol.
Output
24 V DC
Supply Voltage
0.075% of full span
Accuracy
Increase
Output Action
Integral Low
Mounting
Aluminium (Note 5) IP65
Enclosure: Material
Class
Contacts : No.
Form
M20x1.5
Conduit Connection
EEx:ia IIB T4
Ex Certification
Direct Mounted (Bottom)
Mounting
3/4" 600# WNRF FLAGNE +BLIND FLAGNE
Drain and Vent Valves:
Rev. C Gate / SS316
Valve type
See note 10
Bolt/nut
Insulation support/clip shall be provided by Vendor for insulation installed by Purchaser.
Refer to P&ID
Transmitter shall be supplied with 316 SS, Ex i, ATEX certified plugs for all spare cable entries
The rolling magnet type of indication with red and yellow follower.
Transmitter enclosure/ casing/ junction box shall be epoxy-coated low copper aluminium.

CUSTOMER

: PVGAS D

ITEM/TAG No. LG-0141/LIT-0141

LOCATION

: VIETNAM

DATA SHEET No. KTA.TB-PAC03-J13-005.02

AREA

: BLOCK 102 & 106 - PHASE 1

PROJECT No. AL-3098

PROJECT

: TB-HR LPGD PIPELINE SYSTEM

SHEET

VALVES SPECIFICATION
INSTRUMENT

7 OF 10

DATA SHEET

MAGNETIC LEVEL GAUGE WITH LEVEL TRANSMITTER

OTHER

TRANSMITTER

INDICATOR

FLOAT MATERIAL

PROCESS DETAILS

GENERAL

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
NOTES :
1.
2.
3.
4.
5

LG-0141/LIT-0141
Glycol Surge Drum
KTA.TB-PAC03-M07-004
V-103
ZONE 2, GROUP IIA, T3
1 (One)

Tag No.
Service
P&ID No.
Line/Vessel No.
Hazardous Area Classification
Quantity
Fluid
Phase
Operating pressure
Operating temperature
Design pressure
Design Temperature
Operating differential Pressure
Liquid (mixture) density
Body or Chamber Material
Magnetic Follower/Float Material
Flange Material
Flange Rating
Process Connection Type
Conn Size & Location : Upper
Conn Size & Location : Lower
Vent / Drain Conn. Type & Size
Visible Length
Center To Center Distance
Indicator Type
Indicator Scale
Indicator Scale Material
Manufacturer
Model No.
Service
Function
Range
Output
Supply Voltage
Accuracy
Output Action
Mounting
Class
Enclosure: Material
Form
Contacts : No.
Conduit Connection
Ex Certification
Mounting
Drain and Vent Valves:
Valve type/Material
Bolt/Nut

TEG
Liquid
0.25
82.4 - 94
7.5
100
N/A
1066.1

Barg
C
Barg
C
mBar
Kg/m3

316 SS
316 SS
316 SS
ASME 150# RF WN
Flanged
DN50, Side
DN50 Side
Flanged 150# RF, DN 20
1900mm
1900mm
Fluorescent Shuttle with Hermetically Sealed Glass Tube

Rev. C Graduated in % & cm


316 SS
VTA
VTA
Magnetic Level Gauge and Level Transmitter
Indicate/Transmit
0-100% & cm
4-20 mA (2-wire), HART comm. Protocol.
24 V DC
0.075% of full span
Increase
Integral Low
Aluminium (Note 5) IP65
M20x1.5
EEx:ia IIB T4
Direct Mounted (Bottom)
3/4" 600# WNRF FLAGNE + BLIND FLAGNE
Rev. C Gate / SS316
See note 10

Insulation support/clip shall be provided by Vendor for insulation installed by Purchaser.


Refer to P&ID
Transmitter shall be supplied with 316 SS, Ex i, ATEX certified plugs for all spare cable entries
The rolling magnet type of indication with red and yellow follower.
Transmitter enclosure/ casing/ junction box shall be epoxy-coated low copper aluminium.

CUSTOMER

: PVGAS D

ITEM/TAG No. LG-0151/LZT-0151

LOCATION

: VIETNAM

DATA SHEET No. KTA.TB-PAC03-J13-005.02

AREA

: BLOCK 102 & 106 - PHASE 1

PROJECT No. AL-3098

PROJECT

: TB-HR LPGD PIPELINE SYSTEM

SHEET

VALVES SPECIFICATION
INSTRUMENT

8 OF 10

DATA SHEET

MAGNETIC LEVEL GAUGE WITH LEVEL TRANSMITTER

OTHER

TRANSMITTER

INDICATOR

FLOAT MATERIAL

PROCESS DETAILS

GENERAL

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
47
48
49
50
NOTES : 1.
2.
3.
4.
5

LG-0151/LZT-0151

Tag No.
Service
P&ID No.
Line/Vessel No.
Hazardous Area Classification
Quantity
Fluid
Phase
Operating pressure
Operating temperature
Design pressure
Design Temperature
Operating differential Pressure
Liquid (mixture) density
Body or Chamber Material
Magnetic Follower/Float Material
Flange Material
Flange Rating
Process Connection Type
Conn Size & Location : Upper
Conn Size & Location : Lower
Vent / Drain Conn. Type & Size
Visible Length
Center To Center Distance
Indicator Type
Indicator Scale
Indicator Scale Material
Manufacturer
Model No.
Service
Function
Range
Output
Supply Voltage
Accuracy
Output Action
Mounting
Class
Enclosure: Material
Form
Contacts : No.
Conduit Connection
Ex Certification
Mounting
Drain and Vent Valves:
Valve type/Material

Glycol Reboiler
KTA.TB-PAC03-M07-005
V-102
ZONE 2, GROUP IIA, T3
1 (One)

Barg
C
Barg
C
mBar
3

Kg/m

TEG
Liquid
0.30
204
7.5
235
N/A
969.9
316 SS
316 SS
316 SS
ASME 150# RF WN
Flanged
DN50, Side
DN50 Side
Flanged 150# RF, DN 20
600 mm
600 mm
Fluorescent Shuttle with Hermetically Sealed Glass Tube
Rev. C
Graduated in % & cm
316 SS
VTA
VTA
Magnetic Level Gauge and Level Transmitter
Indicate/Transmit
0-100% & cm
4-20 mA (2-wire), HART comm. Protocol.
24 V DC
0.075% of full span
Increase
Integral Low
Aluminium (Note 5) IP65
M20x1.5
EEx:ia IIB T4
Direct Mounted (Bottom )
3/4" 600# WNRF FLAGNE + BLIND FLAGNE
Rev. C Gate / SS316
See note 10

Bolt/Nut
Insulation support/clip shall be provided by Vendor for insulation installed by Purchaser.
Refer to P&ID
Transmitter shall be supplied with 316 SS, Ex i, ATEX certified plugs for all spare cable entries
The rolling magnet type of indication with red and yellow follower.
Transmitter enclosure/ casing/ junction box shall be epoxy-coated low copper aluminium.

ITEM/TAG No. LG-0171/LIT-0171

CUSTOMER

: PVGAS D

LOCATION

: VIETNAM

DATA SHEET No. KTA.TB-PAC03-J13-005.02

AREA

: BLOCK 102 & 106 - PHASE 1

PROJECT No. AL-3098

PROJECT

: TB-HR LPGD PIPELINE SYSTEM

SHEET

VALVES SPECIFICATION
INSTRUMENT

9 OF 10

DATA SHEET

MAGNETIC LEVEL GAUGE WITH LEVEL TRANSMITTER

OTHER

TRANSMITTER

INDICATOR

FLOAT MATERIAL

PROCESS DETAILS

GENERAL

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
NOTES :
1.
2.
3.
4.
5

LG-0171/LIT-0171
Reflux Drum
KTA.TB-PAC03-M07-007
V-104
ZONE 2, GROUP IIA, T3
1 (One)

Tag No.
Service
P&ID No.
Line/Vessel No.
Hazardous Area Classification
Quantity
Fluid
Phase
Operating pressure
Operating temperature
Design pressure
Design Temperature
Operating differential Pressure
Liquid (mixture) density
Body or Chamber Material
Magnetic Follower/Float Material
Flange Material
Flange Rating
Process Connection Type
Conn Size & Location : Upper
Conn Size & Location : Lower
Vent / Drain Conn. Type & Size
Visible Length
Center To Center Distance
Indicator Type
Indicator Scale
Indicator Scale Material
Manufacturer
Model No.
Service
Function
Range
Output
Supply Voltage
Accuracy
Output Action
Mounting
Class
Enclosure: Material
Form
Contacts : No.
Conduit Connection
Ex Certification
Mounting
Drain and Vent Valves:
Valve type/Material
Bolt/Nut

Water
Liquid
0.20
37
7.5
100
N/A
993.4

Barg
C
Barg
C
mBar
Kg/m3

316 SS
316 SS
316 SS
ASME 150# RF WN
Flanged
DN50, Side
DN50 Side
Flanged 150# RF, DN 20
800mm
800mm
Fluorescent Shuttle with Hermetically Sealed Glass Tube

Rev. C

Graduated in % & cm
316 SS
VTA
VTA
Magnetic Level Gauge and Level Transmitter
Indicate/Transmit
0-100% & cm
4-20 mA (2-wire), HART comm. Protocol.
24 V DC
0.075% of full span
Increase
Integral Low
Aluminium (Note 5) IP65
M20x1.5
EEx:ia IIB T4
Direct Mounted (Bottom)
3/4" 600# WNRF FLAGNE
Rev. C
Gate / SS316

Insulation support/clip shall be provided by Vendor for insulation installed by Purchaser.


Refer to P&ID
Transmitter shall be supplied with 316 SS, Ex i, ATEX certified plugs for all spare cable entries
The rolling magnet type of indication with red and yellow follower.
Transmitter enclosure/ casing/ junction box shall be epoxy-coated low copper aluminium.

See note 10

CUSTOMER

: PVGAS D

ITEM/TAG No.

LOCATION

: VIETNAM

DATA SHEET No. KTA.TB-PAC03-J13-005.02

AREA

: BLOCK 102 & 106 - PHASE 1

PROJECT No. AL-3098

PROJECT

: TB-HR LPGD PIPELINE SYSTEM

SHEET

VALVES
ATION
SPECIFICATION
SHEET

10 OF 10

INSTRUMENT DATA SHEET

MAGNETIC LEVEL GAUGE WITH LEVEL TRANSMITTER- NOTES


GENERAL NOTES
1.

Documentation Required:

Hazardous Area Certificate - ATEX certification

Ingress Protection Certificate

Hydrotest Certificate

Calibration Certificate (5 points) issued by manufacturer


Material Certificate, ISO-EN 10204, Type 3.1 (B) for pressure retaining parts.

Installation & Commissioning spare Parts List and 2 years Operational Spares List

Compliance/ Conformance Certificate

2.

General Arrangement drawing with complete Model Numbers, Dimension and Hookup details
All instruments shall be provided with a SS 304 name plate with tag no. pernamently inscribed

Level transmitters and accessories shall be able to sustain process design pressure, temperature and service fluid.

Level transmitters and accessories should meet the following specifications:

Elastomer used in the instrument / accessories are compatible with the service fluid specified

All tube fittings shall be SS316, of Swagelok make, imperial size, double compression type.

Field bus based transmitter/ devices must satisfy the requirements of the field bus registration laboratory with applicable checkmark of foundation field bus.

The field bus instruments in hazardous area shall be certified as per entity concept or shall be FISCO approved.

Internal software shall be configured by the vendor including the following information such as serial number, Device Tag (Tag Number) and Process description.

10

Bolts/nut ASTM A193 Gr.B7/A194-2H with xylan flourocarbon coated

Specification for instrumentation KTA.TB-PAC03-M65-007

at design conditions.

Potrebbero piacerti anche