Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
BOLT
TEMPLATE
1/2" REBAR
(8" O.C. TYP.)
INTEGRATED
ISOLATOR CORNER
BRACKETS
FORMED STEEL
PERIMETER CHANNEL
SPRING ISOLATOR
AS SPECIFIED
3. After the anchor bolts have been located, 4. When concrete has completely cured, lift up
the base high enough to place the isolators
check to insure they match equipment
under the brackets. Do not lift the entire
bolting pattern. Then fill the base with
concrete and let it cure.
weight of the base on one bracket.
MAXIMUM
For pan bottom bases, remove blocking
PROJECTION
after shimming per step 5.
(SEE CHART)
5. Place a shim next to each bracket between
the inertia base and the housekeeping
pad. Check submittal drawing for correct
floor clearance to size shim.
3/8" TO 3/4"
ANCHOR BOLT
AND NUTS
DIA
3/8
MAX PROJECTION
2.5
1/2
2.5
5/8
3.38
3/4
3.25
SHIM
LAST DATE
REVISED
02/11/11
SHIM
DRAWN BY
DCB
DRAWING NO.
INS-81.165-1A
INS-81