Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Chemical C Si Mn P S Cr Mo V W
Composition in % 0.90 - 1.00 0.15 - 0.35 1.05 - 1.20 < 0.030 < 0.030 0.50 - 0.65 0.70 - 1.00 0.70 - 1.00 0.50 - 0.70
Material
Good cutting ability, high hardness and good dimensional stability on heat treatment.
Characteristics
A bar diameter of roughly 60 mm will transform into a maternsitic structure after hardening. Bar diameters up to 120 mm
Transformation will have a maternsitic / bainitic structure after hardening.
Characteristics
Transformation temperatures : Ac1b :~720oC; Ac1e :~765oC; Ms:~200oC
Tool for cutting and stamping sheets of 6 mm thickness; tool for threading, drilling and milling; measuring instruments;
Applications
shears; moulds for plastic forming.
Hardness HRC in Hardened 50oC 100oC 150oC 200oC 250oC 300oC 350oC 400oC
hardened and
tempered condition ~ 64 ~ 64 ~ 64 ~ 63.9 ~ 62 ~ 60 ~ 57 ~ 55.3 ~ 53
Annealed
Hardness (HB)
Max. 230 HB
70
60
Hardness in HRc
50
40
30
20
10
0
0 50 100 150 200 250 300 350 400 450 500 550 600
Te m pe ring Te m pe ra ture in °C
ISAN METALL
A Division of Otto Wolff Handelsgesellschaft mbH
ThyssenKrupp Services AG
Our official trading arm in Indonesia :
Jl. P. Jayakarta 24/10, Jakarta 10730 Tel .(021) 639-3933 Fax. (021) 639-8906
Website: www.krupindo.com E-mail : info@krupindo.com