Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Fixing a fault
In the image on the left there are 2 fault with the machine which stops
it from booting up correctly, I identified what the 2 fault were which the
4-pin connector on the computer was not plugged in, also the sata
connection to the hard drive was not plugged in which stops the
computer reading the information off the hard drive to boot up the
computer. All I did to fix the fault was plug in the connection ports into
the computer.
gg
COMPUTER UPGRADE
In the image on the left the computer needs 2 upgrades to speed up
the computer in general and to make it be able to connect to the
internet wirelessly, to do this all I did was insert more ram to increase
the speed of the computer, to get internet access wireless connection
to the internet I installed a wireless network card into the computer.
Testing
What I did to
test.
What should
happen.
Problem
Upgrade
components
I inserted a wireless
network card into
the motherboard to
give the computer a
wireless connection,
also I inserted some
more ram into the
motherboard which
made the speed of
the computer faster
The PC should be
able to connect to
the internet
wirelessly and the
computer would run
faster due to more
ram being installed.
Fixing
computer
I inserted a sata
cable into the hard
drive and I also
plugged a 4-pin
connector into the
motherboard.
The computer
should boot up
correctly and the
computer should
boot up properly.
Computer
works ?
The computer
should boot up
correctly and should
be in its original
state.