Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
The diffusivity equation in terms of radial coordinates for slightly compressible fluids, which is the
equation forming the basis for much welltest analysis, is shown below
2
p
+
2
r
1 p c p
=
r r
k t
Explain the meaning of each of the terms in this equation. Name one assumption made in deriving this
equation.
Q.2.
Name three boundary conditions commonly used to explain different reservoir types.
Sketch a log-log pressure + derivative plot for a heavily, naturally fractured reservoir.
Q.3. We have the oil flow rate vs. time shown below:
Time (h)
Pressure
0
5050
1.5
4943
3
4937
6
4935
9
4929
12
4927
18
4923
24
4921
48
4916
72
4912
(psi)
Oil viscosity = 0.5 cP, Oil formation volume factor = 1.75 RB/stb, oil rate =500 bopd, formation
thickness = 60 ft, porosity = 0.2, compressibility = 1.5 x 10-5, rw = 0.16 ft and Skin = 0.0.
With the software provided (welltest analysis-drawdown-sv), vary the permeability (k) value to match
the data and thus obtain the permeability of the formation.
Q.4. A pressure build up test was carried out for 100 hours with an initial pressure of 4905 psi with the
results shown in the table below:
Time (h)
Pressure
0
4905
10
4916
20
4925
30
4931
40
4937
50
4942
60
4946
70
4950
80
4953
90
4957
(psi)
Oil viscosity = 0.5 cP, Oil formation volume factor = 1.80 RB/stb, oil rate =400 bopd, formation
thickness = 50 ft, porosity = 0.2, compressibility = 1.5 x 10-5, rw = 0.16 ft and Skin = 0.0. Initial
reservoir pressure was 5000 psi.
With the software provided (welltest analysis-buildup-sv), vary the permeability (k) value to match the
data and thus obtain the permeability of the formation.
100
4960