Sei sulla pagina 1di 4
Toledo Refinery Site Technical Practices Pressure Vessels EP 7-1-4 % Page 26 of 41 4 September 2010 Revision 0.1 14.0 TABLES TABLE 4 PERMISSIBLE MATERIALS OF CONSTRUCTION FOR PRESSURE VESSELS AND HEAT EXCHANGERS Materials Plate Forgings and Fittings Pipe Carbon Steel ‘SA516 Grades: 56, | SA—105 SAM106 Grades: A, B 60, 65, 70 SA-181 Class 60,70 _ |SA-333 Grades: 1,6 SA-360 Grades: LF=1, LF 2 SA-234 Grades: WB, wee. /SA-266: Classes 1, 2 [SA~420 Grades: WPL~6 la Gr 2 Mo SA-367 Grade: 17 |SA-182 Grades. F11, F118] SA-035 Grade: PTi Class 1, 2 SA-336 Grades: F11, F118 SA-234 Grade: WP11 Class: 1.2 2-14 CR- 1 Mo SA-387 Grade: 22 |SA-182 Grades: F22, F22A|SA~895 Grade: P22 class 1,2 )SA-366 Grades: F22, F224 /SA-234 Grade: WP22 Class: 1,2 5 CR-12 Mo SA-367 Grade: 5 _|SA-182 Grades: FS, F5A | SA-326 Grades: PS, Class 1,2 SA-336 Grades: F5,F5A [PSB PSC SA-234 Grade: WPS 9 OR-1 Mo SA-387 Grade: 9 |SA~182 Grade: F2 'SA-335 Grade: PO Class 1,2 SA-336 Grade: FO SA~234 Grade: WPS 300 Series [SA-240 Grades: 304, |SA-182, SA.403, SA-312 Grades: Stainless Steel 304L, 304H, 3161, |" |Grades: F304, Fa04L, | T 304, TP3OAL, 316H, 317L, 321, 347 |F304H, F316, F3t6L, | TP30aH, TP316, F316H, F317L, F321, F347 |TPSI6L, TP3i6H, TP317L, TP321, P347 ‘Alioy 20 SB463 [SB-366, SB-462 SB-728 (UNS 08020) Incoloy [sB-408 38-564, $6-366 SB-163, SB 407 1800 (UNS N08800) 00H (UNS NO8810) Maintained by E°G~ Shaker Heights, OH NUMBER, | Q01-F07 Syl Pressure Vessels - Fabrication Fev.no_{ 1 Dare | MAR 2004 Table I Material Selection for Vessel Components Design Metal Temperature VESSEL =100t0-47°C | 4610S 110.425 °C 351 10 645°C | COMPONENT SHELLS, HEADS, | SA-203 GradesD | SA-ST6 Grade TON |SA'S16 Grade 70, or |SA-DBT Grades Nozzle AND” Jae Jor SA-597 Class 1 |SA-837 Class 1, or. |11, 12, 0 22 IMANWAY NECKS, SA.285 Grade C, JAND REPADS Jor SA-108 Grade 8, or SASS Grade, Jor SA-105, PIPE, NOZZLE, AND |SA-333 Grade 3 |SA-033Grade6 |SA-106 Grade B or |SA-035 Grades IMANWAY NECKS: SA-63 Grade Bi | Pti, 12, 0 22 FORGED FLANGES |SA-350 LF3 /SA-350 WPLG) / -) [SA105 ISA-182 Grades JAND FORGED / Fit or 2 FITTINGS. WROUGHT SA20WPLS |SA420WPLE _[SA234 WRB [SA-284 Grades FITTINGS Ft, 12.0722 STUDSINUTS FOR |[SA320 SAS20 L7ISA-198 |SA199 B7ISA194 _|[SA-199 PRESSURE Lasisa194_ [Grade 2H Grade 2H BSISA-194 CONNECTIONS —_ | Grades 4 or 7 [Grade 3 or SA-193, B16ISA-194 Grade 8 INTERNAL [SA.209 Grade D |SA-516 Grade 70N |SASI6 Grade 70, or |SA-387 Grados ATTACHMENTS — for E JorSA-537 Class 1 |SA-897 Clas 4.07 91, 12, of 22 CLIPS 15A-285 Grade 6 EXTERNAL }SA-203 Grade D |SA-516 Grade 70N |SASI6 Grade 70, or _|SA-387 Grades ATTACHMENT — for E or SA-537 Class 1 [54537 Giass t,or | 11, 12, oF 22 CLIPS © 5A.285 Grade ©, oF SA.36 VESSEL [54-208 Grades D_|SA-516 Grade 7OW, or [SA-576 Grado 70, or ~|5A-087 Grades SUPPORTS: ore [SA-537 Class 1, 0° (588-537 Class tor | 41,12, oF 22 SKIRTS, LEGS, SA-285 Grade Cis [54.285 Grade 6, or LUGS, AND BASE 84-36 (1) RINGS 2 ANCHOR BOLTS [SA-307 Grade B 'SA-307 Grade B SA-307 GradeB —_|SA-307 Grade B (9 SA-36, SA-53, SA-289 and SA-285 materials shall only be used for uly services (2) The materials of supports for vessels in hydrogen service shall be as follows: ‘Legs and lugs: same material as the shell ‘Skits: same ASME material as the shell up to a minimum distance of 300 mm below the shell tangent line. © Allintemal and extemal clips and attachments on vessels in hydrogen service with design metal temperature of 260° C and greater, shall be of the same ASME material as the shel SP-TCS-2i1 1 TOTAL PRESSURE VESSELS pete ecie fee Date : July 1992 Table I Seletion of materials in relation to design temperatures Desien [rare | eartc] same | vam ] ae] wax] ax] war oem TeMPE. . eo) : we | ase | ssc | see | “in sarons | -sse%e_| -woite | wee | 20% | saree se THRE 188 Neola ose | tase) aascrine or | cnt | sou |“ | este | can Ea see ste | seat od rerosue | izsce | scuasme oane Iaziosoe tee | ease | aaa eases al 240 oa Sacss-| catess | onsess | nice | cna | cases Jnzsosie | A205 | “Giadeso [) ondeco | cindeeo | sors | cme! | cnas |p rou {a 20316 Gates | onwes | ones | sme) cme |e seer e221 | cnaee | cor-ao%e| casero | onset F a 200 347 Forge aan R Grate 2 A ma hover hse c |— sonm) see03Me 1 138 ° IKueapae [asso | asso | alos | aim [awn [amen] maa] Javezraou |. ues | ‘tee Grate | (osm) aasccime | Jamraie fo s0 Jano aie eos s Jassarsas nn t roranves {4 is2 347 ce ce a ela aus [auzee mimes | 1 mun feewtis | 1620360 scoime | oN — 7 : ame soos E Iksise [ass | ass | ane | ase [assn [asm] ans] Jasizsou | ones | cates | nies | ones | sn aasceine | Jnsi2aie asia sien ce s runes |asizsct Ansan Anse | oT fevers 1€+03Me senso |e iy E PN A333 Gade L TIREADED | as20-ps ] anor | asmour | assay | ame | aman | amen s ODS nurs [isso [arson [ isso [aisoan | avsoan | anon | amon | amon * A 234 Wi PA | A G20 Wee b / PTS 31.222031 ‘September 2011 Page 18 Table 1 —_Bolting materials. DESIGN TEMPERATURE BOLT MATERIAL NUT MATERIAL i ‘SA320 Gr. BB — Class 2 ‘SA194 Gr BN 101°C to 30 °C SA320 Gr. LT SA104 Grd (180 °F fo -21 °F} General Service 101 Cio 30° SA-320 Gr. LIM SA194 Gr TH (-180 °F 10-21 °F} ‘Sour Service [aoe are ‘SA-193 Gr. BT SA184 Gr 2H (40 °F to 600 °F) General Service =29 °C t6 427 °C SA193 Gr. BTM SA-104 Gr 2H (-20 °F to 800 °F) Sour Service 428 °Ct0 538°C SA193 Gr B16 ‘SA184 Gr. 2A (801 °F to 1000°F} Carbon stee! and low alloy flanges 428°C 10 538°C SA-453 Gr G60— Glass C™ | SA-453 Gr. B60 Class © (801 °F to 1000 °F) Austenitic and non-ferrous flanges BOSC to B15 193 Gr. BB— Class 1" | —__SA-104 Gr. BT (1101 °F to 1800 °F ) Carbon stee! and low alloy flanges 538°C 0 815°C. ‘SA 193 Gr BB Class 7" ‘SA194 Gr. BT (1000 °F to 1500 °F) Austenitic and non-ferrous anges = 1 Contrlid botng techniques may be required to maintain tightness, 71 This materia is selected primarily for low temporature applications. The upper limit has been set for standardization purpases but it may bo used up tothe limits given in ASME Section I This material is selected primanly fe hightemperature applications. The lower iit has been set for standardization purposes but it may be used down to the limits given in ASME Section Vil 34 35 Bolts used to attach piping to nozzle flanges shall be in accordance with the piping class of the attached piping. For other applications, see PTS 30.10.02,11 APPROVAL OF MATERIALS SUPPLIERS ‘The Principal reserves the right to approve material suppliers. Included with this approval process shall be the right lo perform on-site audit of manufacturing feces, POSITIVE MATERIAL IDENTIFICATION (PMI) ‘The Manufacturer shall perform PMI in accordance with PTS 31, 10.00.10 as follows: ) On all alloy material upon receipt at the fabrication faclity. Vessel category requirements are indicated in the applicable Annexes, b)_ On vessels prior to shipment,

Potrebbero piacerti anche