Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
LIKE (0)
SHARE
Using an Adaptive strategy once again, remove the rest material with a smaller tool to rough out the remaining stock where the 16 mm tool
could not fit. Start by making a copy of the previously created operation.
1. In the CAM Browser, right-click on the Adaptive1 node. (Do not be concerned if your Adaptive node appears with a number other than
Adaptive1.)
2. Select Duplicate from the pop-up context menu. This creates a copy of the operation below the original one.
3. Left-click on the new operation (Adaptive2). Alternatively, you can use function key F2 to rename.
4. Change the name to Adaptive2-Rest and press Enter.
5. Right click on the new operation and select Edit from the context menu.
The dialog box for the new operation opens. Notice that all parameter values are the same as the previously created Adaptive operation.
Tip: In many cases, creating a copy (using Copy and Paste or the Duplicate option) is faster than creating a new operation since similar
parameter settings are often used in successive operations.
Tool tab
1. On the Tool tab, click the
2. From the Sample Libraries > Tutorial library, select tool #14 - 5 R0.5 mm bullnose.
3. Click
Passes tab
1. Click the Passes tab.
2. Set Optimal load: to: 2 mm
3. Set Maximum roughing stepdown: to: 5 mm
4. Set Fine stepdown: to: 1 mm
5. Set Radial stock to leave: to: 0.3mm
6. Set Axial stock to leave: to: 0.3mm (this value should update automatically )
1/4
11/10/2014
Yes
No
http://help.autodesk.com/view/INVHSM/2015/ENU/?guid=GUID-4E81DC27-4388-44BD-9A38-DA8AB09094AA
2/4
11/10/2014
http://help.autodesk.com/view/INVHSM/2015/ENU/?guid=GUID-4E81DC27-4388-44BD-9A38-DA8AB09094AA
3/4
11/10/2014
http://help.autodesk.com/view/INVHSM/2015/ENU/?guid=GUID-4E81DC27-4388-44BD-9A38-DA8AB09094AA
4/4