Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Date: 8.4.15
Answer All Questions
PART A (10X2=20marks)
1. Explain the difference between isotropic and anisotropic materials.
2. Define Hookes law.
3. What are the assumptions made in the strength of materials approach model?
4. Find the transverse Youngs modulus of a glass/epoxy lamina with a 70% fiber
volume fraction. Ef = 85 GPa; Em = 3.4GPa.
5. What are the merits and demerits of Tsai-hill failure theory?
6. What are the assumptions made in classical small deformation theory for a
laminate?
7. List down the materials used for sandwich construction
8. Define: Shear crimping.
9. Explain the difference between fibers and whiskers.
10. What is facing failure?
PART-B (5x16=80)
11. a) Show the reduction of anisotropic material stress-strain equations to those of
a monoclinic material stress-strain equation.
(Or)
For a graphite/epoxy unidirectional lamina, find the following.
(a) Compliance matrix.
(b) Minor poisons ratio.
(c) Reduced stiffness matrix.
(d) Strains in the 1-2 co-ordinate system if the applied stresses are 1=2MPa,
2= -3MPa, 12= 4MPa,
E1=181GPa, E2=10.3 GPa, 12=0.28, G12=7.17 GPa..
12. Explain THE ELASTICITY APPROACH to find four elastic moduli.
(or)
Find the following for a 60 angle lamina of graphite /epoxy. E1=181GPa,
E2=10.3GPa, 12=0.28, G12=7.17 GPa.
(a) Transformed compliance matrix
(b) Transformed reduced stiffness matrix
If the applied stress is x =2 MPa, y =-3MPa, xy = 4MPa, also find
Prepared by
Mr.S.MANO
A.P/AERO
HOD
Dr..M.CHINNAPANDIAN
HOD /AERO
Approved by
Dr. PARTHIBAN
Dean / Academic