Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
ANNIVERSARY EDITION
Husqvarna Product Catalogue
Our History
Chainsaws 6
22
Hedge Trimmers
36
Blowers 42
54
70
Zero Turns
80
Riders 90
Personal Protective Equipment 100
Accessories, Oils & Lubricants 104
IMPORTANT INFORMATION
Husqvarna
conducts
continuous
product
development and reserves the right to change
designs, specifications and equipment levels without
prior notification. Always read the instructions
carefully before use, as products with moving parts
can be dangerous if used incorrectly. All images in
the catalogue are for illustrational purposes only. All
technical data was current at the time of printing,
however these may change as a result of further
product development. All engine power values
are as rated by the engine manufacturer. Product
availability, standard features and equipment may
vary from market to market. Optional equipment
may be purchased at an additional cost. Please check
with your local authorised Husqvarna Servicing
Dealer for products recommended and approved in
your market.
Repeatedly revolutionising
cookery.
CHAINSAWS
More power and better
performance year after year.
Our development never stops. We improve our products every year to give them the power,
performance and design to meet your expectations. And what inspires us is you. We listen
and create products with functions based on your needs. On the following pages wed like
to share whats new this year in our range of chainsaws as well as offer you
a chance to experience some of our latest solutions in product advancement.
H Homeowner
L Landowner
C Commercial
X-Torq
Distinct felling
sight
Boot grip
X-TORQ
AUTOTUNE
MAGNESIUM CRANKCASE
Features specified may or may not be available in selected models - refer to product specifications for details.
Air Injection
SMART START
AIR INJECTION
LOW VIB
SMART START
H 321EL
2000W - Standard bar 16 - Chain pitch 3/8LP - 4.4kg
Electronic SoftStart, Chain oil level window, Inertia chain brake.
H 236 E-SERIES
38.2cc - 1.4kW - Standard bar 14 - Chain pitch 3/8LP - 4.7kg
X-Torq , Smart Start , Air Injection, Low Vib , Tool-less
chain tensioner.
H 240 E-SERIES
38.2cc - 1.5kW - Standard bar 16 - Chain pitch 3/8LP - 4.7kg
X-Torq , Smart Start , Air Injection, Low Vib , Tool-less
chain tensioner.
H 135 E-SERIES
40.9cc - 1.5kW - Standard bar 16 - Chain pitch 3/8LP - 4.6kg
X-Torq , Smart Start , Air Injection, Low Vib , Tool-less
chain tensioner.
11
X-TORQ
SLIMLINE DESIGN
All-round chainsaws
prepared for all situations.
Husqvarnas all-round chainsaws are easy to start and
easy to manoeuvre, making them the ideal workmates for
landowners. Thanks to the X-Torq engine your operation
will be comfortable because the exhaust emissions are
reduced and less fuel is needed making your work flexible
and more economic. All these chainsaws are equipped
with the Low Vib system that reduces the vibration to
make your work even more comfortable.
Features specified may or may not be available in selected models - refer to product
specifications for details.
SMART START
NEXT
GENERATION
NEXT
GENERATION
L 440 E-SERIES
40.9cc - 1.8kW - Standard bar 16 - Chain pitch .325 - 4.4kg
X-Torq , Smart Start , Air Injection, Low Vib , Tool-less chain
tensioner, Slim starter, Flip-up tank cap.
L 445 E-SERIES
45.7cc - 2.1kW - Standard bar 16 - Chain pitch .325 - 5.1kg
X-Torq , Smart Start , Air Injection, Low Vib , Tool-less chain
tensioner, Slim starter, Flip-up tank cap.
NEXT
GENERATION
L 450 E-SERIES
50.2cc - 2.4kW - Standard bar 18 - Chain pitch .325 - 5.1kg
X-Torq , Smart Start , Air Injection, Low Vib , Tool-less chain
tensioner, Slim starter, Flip-up tank cap.
L 460
60.3cc - 2.7kW - Standard bar 20 - Chain pitch 3/8 - 5.8kg
X-Torq , Smart Start , Air Injection, Low Vib , Side-mounted
chain tensioner, Quick release air filter, Adjustable oil pump.
LOW VIB
EASY REFUELLING
13
AUTOTUNE
Provides maximum power through
automatic engine setting with no manual
carburettor adjustments. Compensates
for different fuels, altitude, humidity and
ambient temperature.
X-TORQ
TRIOBRAKE
14
AutoTune - Revolutionising
the chainsaw market.
A revolutionary range of chainsaws that deliver optimal
engine settings and performance. The unique AutoTune
feature eliminates manual carburettor adjustments while
automatically compensating for different fuel qualities,
altitude, temperature and dirt in the air filter. AutoTune
runs continuously whilst the chainsaw engine is running,
and the carburettor auto-adjusts to suit the conditions
regardless of whether the engine is at idle or full throttle.
This chainsaw range delivers the ultimate combination of
more power, fewer emissions and no time consuming
adjustments, without compromising on performance.
Features specified may or may not be available in selected models - refer to product
specifications for details.
L 455R AUTOTUNE
55.5cc - 2.6kW - Standard bar 18 - Chain pitch .325 - 5.9kg
AutoTune, X-Torq , Smart Start , Air Injection, Low Vib , Quick release air filter, Snap lock cylinder cover, Adjustable oil pump.
L 556 AUTOTUNE
59.8cc - 3.1kW - Standard bar 20 - Chain pitch 3/8 - 5.8kg
AutoTune, X-Torq , Air Injection, Low Vib , Magnesium
crankcase, Side-mounted chain tensioner, Captive bar nuts.
L 570 AUTOTUNE
67.9cc - 3.6kW - Standard bar 20 - Chain pitch 3/8 - 6.8kg
AutoTune, X-Torq , Air Injection, Low Vib , Magnesium
crankcase, Side-mounted chain tensioner, Adjustable oil pump.
C 550XP AUTOTUNE
50.1cc - 2.8kW - Standard bar * 16/18 - Chain pitch .325 - 4.9kg
AutoTune, X-Torq , Air Injection, Low Vib , Magnesium
crankcase, Side-mounted chain tensioner, Captive bar nuts.
C 562XP AUTOTUNE
59.8cc - 3.5kW - Standard bar 20 - Chain pitch 3/8 - 5.7kg
AutoTune, X-Torq , Air Injection, Low Vib , Magnesium
crankcase, Side-mounted chain tensioner, Captive bar nuts.
C 576XP AUTOTUNE
73.5cc - 4.2kW - Standard bar 20 - Chain pitch 3/8 - 6.8kg
AutoTune, X-Torq , Air Injection, Low Vib , Magnesium
crankcase, Side-mounted chain tensioner, Adjustable oil pump.
Standard bar fit up options for model 550XP AUTOTUNE: Australia 16 / New Zealand 18
15
LOW VIB
MAGNESIUM CRANKCASE
AIR INJECTION
XP Chainsaws - Professional,
powerful and precise.
Our XP chainsaws are developed and tested in
collaboration with the most demanding professional
users. Built to withstand the toughest treatment, the XP
range features carefully selected, first-rate components,
such as the forged three-piece crankshaft, magnesium
crankcase and clutch cover, making them extremely
durable. Equipped with sophisticated engine technology
that delivers high torque over a wide rpm range, these
chainsaws come fully loaded with features such as a
slimline design and high centre of gravity for maximum
manoeuvrability, Air Injection and Low Vib antivibration system to reduce operator fatigue.
Features specified may or may not be available in selected models - refer to
product specifications for details.
16
C 390XP
88.0cc - 4.8kW - Standard bar 24 - Chain pitch 3/8 - 7.1kg
Air Injection, Low Vib , Magnesium crankcase, Side-mounted chain
tensioner, Heavy-duty air filter, Forged three-piece crankshaft.
C 395XP
93.6cc - 5.2kW - Standard bar 24 - Chain pitch 3/8 - 7.9kg
Air Injection, Low Vib , Magnesium crankcase, Side-mounted chain
tensioner, Heavy-duty air filter, Forged three-piece crankshaft.
C 3120XP
118.8cc - 6.2kW - Standard bar 28 - Chain pitch .404 - 10.4kg
Low Vib , Magnesium crankcase, Forged three-piece crankshaft,
Adjustable oil pump, Heavy-duty air filter.
NDER
TESTED UN
S
O DITION
C
E
M
E
R
T
X
E
SUPERB MANO
EUVRABILIT Y
17
LOW VIB
X-TORQ
18
CHAINSAW STROP
To be used together with a chainsaw
hook for connecting the chainsaw to a
belt or harness. The elastic design
provides a soft stop in the event of the
chainsaw being dropped at height,
minimising impact on the saw and
operator. Measures 0.5m when relaxed
and 1.25m fully stretched out.
577 43 80-01
L T435
35.2cc - 1.5kW - Standard bar 12 - Chain pitch 3/8LP - 3.4kg
X-Torq , Low Vib , Unique hand guard, Belt eyelet, Tool-less air filter cover, Sidemounted chain tensioner.
Chainsaw Hook
C T540XP
37.7cc - 1.8kW - Standard bar 12 - Chain pitch 3/8LP - 3.7kg
X-Torq , AutoTune, Low Vib , Individual grip size, Unique hand guard, Belt eyelet,
Flip-up tank cap, Side-mounted chain tensioner.
578 07 71-01
Eyelet
Chainsaw Strop
CHAINSAW HOOK
A robust auto-lock hook is easily
attached to any harness with removable
belt. Designed for easy connection of
chainsaw to a belt.
577 43 79-01
EYELET
Eyelet with unique design and overload
release, made for arborists who use a
standard chainsaw. The loop is attached
to the grip of the saw, which can then
be connected to a strop or directly to
the chainsaw hook.
TECHLITE BAR
20% lighter than a regular laminated
bar and with 25% better rigidity. Its
less susceptible to bending and has a
low weight, which gives a more
balanced chainsaw.
576 83 07-45
576 83 07-52
12 bar
3/8 Mini TechLite
14 bar
3/8 Mini TechLite
19
240
e-series
135
e-series
440
e-series
445
e-series
450
e-series
455R
AutoTune
460
Article Number
966640403
966511416
967292503
967155936
967156736
967292638
966767718
965031270
Displacement, cc
38.2
38.2
40.9
40.9
45.7
50.2
55.5
60.3
1.4
1.5
1.5
1.8
2.1
2.4
2.6
2.7
100.7
100.7
102
102
103.3
103.5
104
104
TECHNICAL SPECIFICATONS
Power, kW
Noise level, dB(A)
Noise emissions LWA, dB(A)
Vibrations, front / rear handle, m/s2
113
113
114
114
114
115
113
114
2.1 / 2.7
2.1 / 2.7
3.9 / 3.8
2.5 / 3.2
1.9 / 2.6
2.3 / 2.7
3.4 / 4.5
4.9 / 4.3
4.7
4.7
4.6
4.4
5.1
5.1
5.8
5.8
3/8 LP
3/8 LP
3/8 LP
.325 Pixel
.325 Pixel
.325 Pixel
.325
3/8
13-16
13-16
14-16
1318
1320
1320
1320
16-20
AutoTune
RevBoost
Decompression valve
SmartStart
Air Purge
Starting reminder
Combined choke/stop control
Magnesium crankcase
Vibration-dampened carburettor
TECHNICAL SPECIFICATONS
Article Number
321EL
967547476
Voltage, V
230
Output, W
2000
4.4
3/8 LP
14-16
*Equivalent sound pressure level, as per ISO 22868, is calculated as the time-weighted energy sum for the sound
pressure levels at various operational states. Typical variation for equivalent sound pressure level is a standard
deviation of 1 dB(A).
**Equivalent vibration level, as per ISO 22867, is calculated as the time-weighted energy sum for the vibration
levels at various operational states. The data presented for equivalent vibration level has a typical variation
(standard deviation) of 1 m/s.
4.4 / 5.4
20
TABLE KEY:
= Standard
( )
= Optional
= Not applicable
556
AutoTune
570
AutoTune
967169740
966633040
59.8
3.2
106
550 XP
AutoTune
550 XP
TrioBrake
562 XP
AutoTune
576 XP
AutoTune
390 XP
395 XP
3120 XP
T435
T540 XP
966648715
966570340
966874340
965060744
965902744
965960328
966997212
965982712
67.9
966648116 - AU
966648118 - NZ
50.1
50.1
59.8
73.5
87.9
93.6
118.8
35.2
37.7
3.6
2.8
2.8
3.5
4.2
4.8
4.9
6.2
1.5
1.8
107
106
106
106
105
107
102
102
103
104
118
115
116
116
118
116
118
115
116
114
116
2.7 / 3.2
3.2 / 3.4
2.8 / 3.7
3.0 / 3.7
4.4 / 5.3
2.9 / 3.6
5.8 / 7.0
6.5 / 10.2
6.7 / 7.8
4.1 / 3.9
3.1 / 3.2
5.8
6.8
4.9
5.0
5.7
6.8
7.1
7.9
10.4
3.4
3.7
3/8
3/8
.325
.325
3/8
3/8
3/8
3/8
3/8 OR.404
3/8 LP
3/8 LP
13-24
15-28
1320
1320
15-28
15-28
1828
1836
2442
12-14
1216
21
H Homeowner
L Landowner
C Commercial
2
22
23
Adjustable handlebar
High handlebar
Low Vib
ERGONOMIC DESIGN
SMART START
X-TORQ
Features specified may or may not be available in selected models - refer to product specifications for details.
24
Detachable shaft
Soft grip handles
Smart Start
Scan to see our
Brushcutters in action.
X-Torq
BALANCE XT HARNESS
LOW VIB
MAXIMUM DURABILITY
The engines are equipped with effective antivibration dampeners that absorb the vibration,
sparing your arms and hands to let you work
longer with less fatigue.
25
TRIMMER RANGE
SMART START
X-TORQ
L 524L
25.4cc - 0.95kW - 4.4kg
Low Vib , X-Torq , Smart Start , Stand-alone Starter. Commercial
2-stage air filter, Standard equipment: Tap N Go head, Blade kit,
Shoulder strap.
C 525LST
25.4cc - 0.95kW - 4.7kg
High torque bevel gear, Low Vib , X-Torq , Smart Start , Standalone Starter. Commercial 2-stage air filter, Lifetime driveshaft
warranty, Standard equipment: Tap N Go head, Alloy head, Blade
kit, Shoulder strap.
C 535RJ
34.6cc - 1.6kW - 6.0kg
X-Torq , Auto-return stop switch, Heavy-duty bevel gear, Lifetime
driveshaft warranty, Stand-alone Starter. Adjustable handle,
Translucent fuel tank, Standard equipment: Tap N Go head, Blade
kit, Shoulder strap.
H 122C
www.husqvarna.com
Read more about our products and find your nearest Dealer now.
BLADE KIT
COMBI-TRIMMER RANGE
SMART START
CLICK ON ATTACHMENTS
H 122LD
21.7cc - 0.6kW - 4.7kg
Smart Start , Auto-return stop switch, Low noise engine,
Adjustable handle, Tap N Go head.
www.husqvarna.com
Read more about our
products and find your
nearest Dealer now.
C 525RJD
25.4cc - 0.95kW - 4.9kg
Low Vib , X-Torq , Smart Start , Commercial 2-stage air filter,
Lifetime driveshaft warranty, Standard equipment: T35X
Tap N Go head, 255-4 Grass blade, Blade kit, Shoulder strap.
C 324LD
25.0cc - 0.8kW - 5.4kg
4-Stroke engine, Smart Start , Soft grips, Lifetime driveshaft
warranty, Standard equipment: T35 Tap N Go head, 255-4
Grass blade, Blade kit, Shoulder strap.
29
X-TORQ
ERGONOMIC HANDLEBAR
H 135R
34.6cc - 1.4kW - 6.8kg
X-Torq , Auto-return stop switch, Stand alone starter, Adjustable
handlebar, Standard equipment: T35 Tap N Go head, 300-3
Grass blade, Double harness.
C 525RS
25.4cc - 0.95kW - 5.0kg
X-Torq , Smart Start , Commercial 2-stage air filter, Lifetime
driveshaft warranty, Standard equipment: T35X Tap N Go head,
255-4 Grass blade, Balance 35 harness.
C 324RX
25.0cc - 0.8kW - 5.5kg
4-Stroke engine, Smart Start , Soft grips, Adjustable handlebar,
Lifetime driveshaft warranty, Standard equipment: T35 Tap N Go
head, 255-4 Grass blade, Balance 35 harness.
C 535RXT
34.6cc - 1.6kW - 6.2kg
X-Torq , Low Vib , Smart Start , Soft grips, Adjustable
handlebar, Lifetime driveshaft warranty, Standard equipment:
T35X Tap N Go head, 300-3 Grass blade, Balance X harness.
C 345FR
45.7cc - 2.1kW - 8.5kg
X-Torq , Low Vib , Smart Start , Adjustable handlebar, Lifetime
driveshaft warranty, Standard equipment: T45X Tap N Go head,
300-3 Grass blade, 200-22 Saw blade, Balance X harness.
C 555FX
53.3cc - 2.8kW - 8.9kg
X-Torq , Low Vib , Smart Start , Thumb-operated throttle,
Lifetime driveshaft warranty, Standard equipment: 225-24 Saw
blade, Balance XT harness.
Trimmer Head
Grass Blade
Saw Blade
31
Harness - Balance XT
Harness - Balance X
STANDARD HARNESS
SHOULDER STRAP
537 27 57-01
537 21 63-01
537 21 62-01
32
For dense, coarse grass, but not for woody growth. Four
to eight teeth.
578 44 42-01 8 Tooth, 255mm , 20mm Arbor
578 44 40-01 8 Tooth, 255mm , 1 Arbor
578 44 39-01 4 Tooth, 255mm , 20mm Arbor
578 44 37-01 4 Tooth, 255mm , 1 Arbor
Tri-Cut (M10)
Tri-Cut (M12)
Plastic Blade Tri-Cut (255mm) - Pkt 6
Plastic Blade-Tri Cut (300mm) - Pkt 6
122C
524L
525LST
535RJ
122LD
525RJD
324LDX
Article Number
966779701
967210501
967210601
966628701
966481201
967210701
580495601
Displacement, cc
21.7
25.4
25.4
34.6
21.7
25.4
25
Power, kW
0.6
0.95
0.95
1.6
0.6
0.95
0.8
88
98
98
100
90
98
97
108
114
114
116
108
114
107
5.0 / 3.6
5.0 / 3.8
5.8 / 3.3
4.0 / 4.1
3.6 / 3.5
4.5 / 3.9
4.1 / 4.1
5.4
4.4
4.4
4.7
6.0
4.7
4.9
Low Vib
E-Tech / E-Tech II
X-Torq
SmartStart
Soft grips
Two-piece shaft
135R
525RS
324R X
535RXT
345FR
555FX
Article Number
966604801
967210801
968056204
966628901
966016003
966629103
Displacement, cc
34.6
25.4
25
34.6
45.7
53.3
Power, kW
1.4
0.95
0.8
1.6
2.1
2.8
98
98
89
96
100
103
113
114
106
111
116
117
2.9 / 2.5
3.6 / 2.4
2.7 / 2.2
2.5 / 2.7
2.0 / 3.0
2.1 / 2.3
6.8
5.0
5.5
6.2
8.5
8.9
Low Vib
X-Torq
SmartStart
E-Tech
Thumb-operated throttle
Soft grips
34
= Standard
( )
= Optional
= Not applicable
O
O
355FX /
555FX
343FR /
345FR
333R /
335RX
525RJD
535RJ
324LD-MUO
327LD-MUO
233RJ
525LST
525RSR
524L
324RX /
327RX
326LS /
327LS
335LS /
535LS
323L
135R / 535RX
535RXT
128R
128LD
122LD /
124L
122C / 124C /
128C
TRIMMER HEADS
Manual Heads
5784474-01
S35 - M10
5784476-01
S35 - M12
5759898-01
5784478-01
(Free-wheeling plate)
Trimmy SII M12
O
O
O
O
T25 3/8" RH
9666744-01
T25 M10
9666744-01
T25 3/8" LH
5784463-01
S
S
T35 - M10
S1
5784465-01
T35 X - M10
5784464-01
T35 - M12
5784466-01
T35 X - M12
5784468-01
T45 X - M12
5784470-01
T55 X - M12
Automatic Heads
5310092-26
Auto 55 - M12
O
O
Tri-Cut Heads
5784491-01
Tri-cut M10
5784493-01
Tri-cut M12
BLADES
Grass Blades
5784440-01
255 - 8T 1in
5784437-01
255-4T 1in
O*
O
S
S1
Multi Blades
5784449-01
255-3T 1in
5784447-01
275-4T 1in
5784445-01
300-3T 1in
Shredder Blade
5784453-01
200-26T 1in
200-22T 1in
5784426-01
200-22T 20mm
5784427-01
225-24T 1in
KITS
5370485-01
J-handle Kit
9527156-16
J-handle Kit
5442496-01
J-handle Kit
5448429-01
S = Standard Equipment
* = Not applicable to 122LD
**
**
**
**
**
**
O*
O
**
O
O = Optional Equipment
35
HEDGE TRIMMERS
Make sure you always trim
with first class results.
A hedge needs time and care to stay healthy and beautiful. Different hedges need
different tools and the surroundings are also important to have in mind when buying
a hedge trimmer. Husqvarna hedge trimmers are powerful, precise and efficient, and
our various models suit different needs. Well help you find the right trimmer for you
and your hedges.
H Homeowner
L Landowner
C Commercial
36
37
Low Vib
Adjustable rear handle
Auto return stop switch
REMOTE-CONTROLLED BAR
X-TORQ
Features specified may or may not be available in selected models - refer to product specifications for details.
38
Comfort handles
Smart Start
LOW NOISE
ANTI-VIBRATION
39
SMART START
ANTI-VIBRATION
DURABILITY
H 122HD45
21.7cc - 0.6kW - 4.7kg - Bar length 45cm - Teeth opening 28mm
Low Vib , Smart Start , Auto-return stop switch, Low noise engine
H 122HD60
21.7cc - 0.6kW - 4.9kg - Bar length 60cm - Teeth opening 28mm
Low Vib , Smart Start , Auto-return stop switch, Low noise engine,
5-way adjustable rear handle.
C 226HD60S
23.6cc - 0.85kW - 5.8kg - Bar length 60cm - Teeth opening 28mm
X-Torq , Stand alone starter, 3-way adjustable rear handle, Long life
gear components.
C 327HE4X
24.5cc - 0.9kW - 6.6kg - Bar length 55cm - Teeth opening 29mm
Smart Start , E-Tech low emission engine, Lifetime driveshaft
warranty, Remote-controlled adjustable cutter bar, Long reach.
122HD45
122HD60
226HD60S
327HE4X
Article Number
966532301
966532401
966945603
966559901
Displacement, cc
21.7
21.7
23.6
24.5
Power, kW
0.6
0.6
0.85
0.9
93
94
91
92
101
101
100
106
4.0 / 5.0
2.9 / 4.9
4.1 / 3.6
1.8 / 1.5
Bar length, cm
45
60
60
55
Teeth opening, mm
28
28
28
29
20
20
22
20
4.7
4.9
5.8
6.6
SmartStart
Auto return stop switch
Air Purge
E-Tech / E-TechII
Low Vib
Ergonomic handles
X-Torq
= Standard
( )
= Optional
= Not applicable
41
BLOWERS
Clear the ground with
minimum effort.
Let a powerful and fast blower from Husqvarna clean up your property. Get rid of
leaves, grass, dust, cobwebs, sand, gravel - as well as the hard work. Husqvarna
blowers are ergonomic, efficient and enjoyable to use. Depending on the size of your
work place and your demands, well help you choose a blower that suits you perfectly.
H Homeowner
L Landowner
C Commercial
2
42
43
Cruise control
In lined air outlet
Smart Start
Vac capable
AIR INJECTION
LOW VIBRATIONS
X-TORQ
Features specified may or may not be available in selected models - refer to product specifications for details.
44
Chest strap
Air Injection
Efficient impeller
design
X-Torq
ERGONOMIC HARNESSES
COMFORT HANDLES
VAC CAPABILITY
45
BLOWER RANGE
X-TORQ
MAXIMUM DURABILITY
H 125BVX
28.0cc - 0.8kW - 4.3kg - Air speed 58.1m/s
Smart Start , Auto-return stop switch, Cruise control, Soft grip
handle, Adjustable tube length, Vac-capable, 16:1 mulching
function, Vac kit supplied standard.
C 425BVS
25.4cc - 0.85kW - 4.2kg - Air speed 55.9m/s
X-Torq , Air purge, Supplied with both flat and round nozzles,
Vac-capable, Assist handle (vac-mode), Vac kit available as an
optional accessory.
C 530BT
29.5cc - 0.9kW - 6.7kg - Air speed 64.8m/s
X-Torq , High blowing capacity, Adjustable tube length, Tube
mounted throttle lock, Adjustable handle with comfort grip,
Ergonomic harness.
C 570BTS
65.6cc - 2.9kW - 11.2kg - Air speed 105.6m/s
X-Torq , High blowing capacity, Adjustable tube length, Tube
mounted throttle lock, 2-stage air filtration system, Adjustable
handle with comfort grip, Ergonomic harness.
C 356BTX
51.7cc - 2.4kW - 10.4kg - Air speed 79m/s
E-Tech , Low Vib , Air Injection, Effective noise dampening, Tube
mounted throttle lock, High blowing capacity, Adjustable handle
with comfort grip, Ergonomic harness.
125BV X
425BVS
530BT
356BT X
570BTS
Article Number
952715645
967153701
966780301
953210104
966629401
Displacement, cc
28.0
25.4
29.5
51.7
65.6
Power, kW
0.8
0.85
0.9
2.4
2.9
92
90
94
91
99
70
72
69
64
76
107
106
102
100
110
11.1
2.5
3.9
1.8
13.3
12.2
21.7
27.5
12
11.4
10.2
13.4
21.8
58.1
55.9
64.8
79
105.6
4.3
4.2
6.7
10.4
11.2
E-Tech
X-Torq
Low Vib
Throttle lock
Adjustable handle
Ergonomic harness
Vacuum Kit
( )
TABLE KEY:
= Standard
( )
= Optional
= Not applicable
47
H Homeowner
L Landowner
C Commercial
48
49
Features specified may or may not be available in selected models - refer to product
specifications for details.
33.5cc - Forward-rotating Tines, Cultivating width 24cm Working depth 15cm. Easy to start Subaru engine, Transmission
with triple ball bearings, Easy-adjust drag bar, Tine shield,
Carrying handle, Foldable handle, Optional accessories available.
L TF434P CULTIVATOR
169cc - Forward-rotating Tines, Cultivating width 80cm Working depth 30cm. Easy to start Subaru engine, Pneumatic
drive, Forward and reverse gears, Handlebar-mounted gear
selection, Easy-adjust drag bar, Plant guards, Adjustable handle
bar, Transport wheel.
C 327PT5S POLESAW
24.5cc - 0.9kW - Standard bar 10 - 7.3kg - Total length 3.92m
Telescopic shaft, Stand alone starter, Auto return stop switch,
Efficient air filter, Automatic chain lubrication, Tool-less chain
tensioner, Engine skid plate, Balance Flex harness.
L T300RS TILLER
51
T300RS
TF434P
TR430DUAL
966840301
966787001
1.0kW @
6000rpm
3.7kW @
3400rpm
Subaru
Subaru
Subaru
0.7
3.4
3.4
Cultivating width, cm
24
80
43.18
Gear ratio
45:1
Working depth, cm
15
30
16.51
2500
Article Number
Net power
set rpm
Engine manufacturer
EARTH AUGER
143AE15
960910018
Article Number
966069602
3.14kW @
3600rpm
Displacement, cc
41.5
Power, kW
Max. recommended engine speed, rpm
1.47
12000
167
28-165
3600
Worm gear /
Manual
Chain / Pneumatic
Chain /
Gear
0.9
1/
2/1
1/1
103
Weight, kg
12
59
90
Dual-rotating tines
Fold-down handlebar
Adjustable handlebar
Carry handles
Transport wheels
Drive wheel
Optional Accessories
Ridger
Ridger with metal wheels
Tine de-thatcher
Weeding tool
Scarifier
Edger
8.9
110
6.0 / 9.3
AUGER BITS
Article
Number
577335901
577336001
577336101
577336201
( )
( )
Article
Number
()
()
( )
577336301
( )
577336501
577336601
POLE SAW
327PT5S
EDGER
Article Number
966963101
Article Number
Displacement, cc
24.5
Engine Manufacturer
Power, kW
0.9
Displacement, cc
148
105
Transmission type
Belt
3.0 / 3.0
1.79
4 / 10
2.4 / 5.4
2.72 / 3.92
LE475
966951101
Briggs & Stratton
9 / 23
Tyre size
8 x 2
Weight, kg
32.2
25-30 / 10-12
7.3
E-Tech II
*Equivalent sound pressure level, as per ISO 22868, is calculated as the time-weighted energy sum for the sound pressure levels at various operational states. Typical
variation for equivalent sound pressure level is a standard deviation of 1 dB(A).
**Equivalent vibration level, as per ISO 22867, is calculated as the time-weighted energy sum for the vibration levels at various operational states. The data presented for
equivalent vibration level has a typical variation (standard deviation) of 1 m/s.
TABLE KEY:
52
= Standard
( )
= Optional
= Not applicable
53
ROBOTIC MOWERS
Leading the way in robotic
mowing for over 20 years.
The Husqvarna Automower robotic lawnmower was designed to deliver optimal
cutting results. Inspired by the way grazing sheep regularly eat small amounts in a
random pattern, all of this takes place while you, do nothing. Depending on your
requirements and the size of your lawn, youll find a robotic mower that suits your
needs. Our mowers are dependable and can handle complex gardens to deliver fantastic
results with minimal supervision. In fact, 20 years of engineering and refinements
make Husqvarna Automower robotic lawnmowers the best in their class.
H Homeowner
L Landowner
C Commercial
54
55
Weather proof
Anti-theft alarm
Quiet cutting 61 dB
ANTI-THEFT
WEATHER PROOF
CUTTING HEIGHT
Features specified may or may not be available in selected models - refer to product specifications for details.
56
GPS-assisted navigation
Li-Ion battery
Scan to see our
Automower in action.
Timer
Information panel
Weather timer
Automatic passage
handling
Weather proof
Quiet cutting
58 dB
Anti-theft alarm
SENSORS
CONTROL PANEL
REMOTE GPS
57
AUTOMOWER RANGE
ENVIRONMENTAL CARE
AUTOMATIC CHARGING
H 305
Working area up to 500m2 - Cutting width/height 17cm/2-5cm
Li-ion battery, PIN/Alarm, Timer, Automatic charging, 3 cutting
blades, Collision sensors, Easy access control panel.
H 320
Working area up to 2200m2 - Cutting width/height 24cm/2-6cm
Li-ion battery, PIN/Alarm, Timer, Automatic charging, 3 cutting
blades, Collision sensors, Spot cutting mode.
H 330X
Working area up to 3200m2 - Cutting width/height 24cm/2-6cm
Li-ion battery, GPS navigation, PIN/Alarm, Timer, Automatic
charging, 3 cutting blades, Collision sensors, Spot cutting mode.
L 265ACX
Working area up to 6000m2 - Cutting width/height 32cm/2-6cm
Li-ion battery, GPS remote module, Ultrasonic sensors, PIN/
Alarm, Timer, Automatic charging, 5 cutting blades.
305
Article Number
Recommended working area
320
330X
265 ACX
966761506
967167906
967168206
966747606
0-500m 2 +/-20%
0-2200m 2 +/-20%
0-3200m 2 +/-20%
0-6000m 2 +/-20%
31m 2
90m 2
135m 2
230m 2
Li-ion / 1.6
Li-ion / 3.2
Li-ion / 6.4
Li-ion / 7.5
18
18
18
22
Automatic
Automatic
Automatic
Automatic
Charging current, A
1.0
2.0
4.0
8.0
90
60
60
40
60
80
150
80
20-50 / 170
20-60 / 240
20-60 / 240
20-60 / 320
61
58
58
65
Weight, kg
6.7
11.5
13.2
12.9
Loop wire, m
150
250
400
500
Cramps, pcs
200
300
400
200
30
Charging system
Cutting system
Cutting height/width, mm
INSTALLATION ACCESSORIES
= Standard
( )
= Optional
= Not applicable
59
H Homeowner
L Landowner
C Commercial
60
61
Two-in-One cutting
system: Collection
and BioClip
Large, easy to
handle collector
Central cutting
height adjustment
Wheel locking
nuts
BIOCLIP
CUTTING HEIGHT
Features specified may or may not be available in selected models - refer to product specifications for details.
62
Side-adjustable handle
Anti-vibration
handle
Self-propelled
front wheel drive
Central cutting height
adjustment
Rubber tyres
Double ball
bearing wheels
High performance
cutting deck
TWO-IN-ONE CUTTING
63
HIGH PERFORMANCE
64
NEXT
GENERATION
H LC18
Briggs & Stratton DOV - 2.7kW - Cutting width 46cm
ReadyStart engine, Steel cutting deck, Central cutting height
adjustment, 2-in-1 cutting system (BioClip & collection) Double
ball bearing wheels, Folding comfort handle.
NEXT
GENERATION
NEXT
GENERATION
NEXT
GENERATION
L LC19A
Briggs & Stratton DOV - 2.7kW - Cutting width 48cm
ReadyStart engine, Alloy cutting deck, Central cutting height
adjustment, 2-in-1 cutting system (BioClip & collection) Double
ball bearing wheels with alloy rims, Folding comfort handle.
C LC19AP
Briggs & Stratton DOV/IC - 2.7kW - Cutting width 48cm
ReadyStart engine, Alloy cutting deck, Central cutting height
adjustment, 2-in-1 cutting system (BioClip & collection) Double
ball bearing wheels with alloy rims, Front bumper, Side skirts.
C LB548SE
Honda OHC- 2.8kW - Cutting width 48cm
Self-propelled drive system, Front wheel drive, Anti-vibration
side-adjustable handle, Central cutting height adjustment, Cast
aluminium deck, 2-in-1 cutting system (BioClip & rear eject).
C LB553SE
Honda OHC- 2.8kW - Cutting width 53cm
Self-propelled drive system, Front wheel drive, Anti-vibration
side-adjustable handle, Central cutting height adjustment, Cast
aluminium deck, 2-in-1 cutting system (BioClip & rear eject).
C GX560
Honda OHC- 2.8kW - Cutting width 50.5cm
Air cushion mowing, BioClip (mulching) cutting system, Cutting
deck made from durable ABS plastic, Working angle up to 45.
65
SPECIALITY PRODUCTS
66
C DT22H DETHATCHER
Honda GX Series - 3.6kW @ 3600rpm - Working depth/width
2.5/56cm
Sold as platform and motor unit only, Fit up options sold separately.
C AR19 AERATOR
Honda GX Series - 2.6kW @ 3600rpm - Working depth/width
7.6/48cm
Patented free-wheeling outer tine system, Foldable handle.
539 10 71-83
539 10 71-85
539 10 71-84
67
LAWN MOWERS
Article Number
LC19A
LC19AP
Power, kW
Fuel tank capacity, litres
1.05
1.05
1.05
1.05
Drive system
Push
Push
Push
Push
Drive wheels
Speed, km/h
Cutting deck material
2.8
2.8
2.8
0.93
Self-propelled,
single speed
Front
1.1
Self-propelled,
single speed
Front
Hover
0-4.8
0-4
Alloy
Aluminium
BioClip /
Rear eject
53 / 27-65
Aluminium
BioClip /
Rear eject
53 / 30-60
ABS Plastic
50.5 / 10-30
46 / 15-80
48 / 15-80
75
75
75
82
78
86
33.5
34.0
34.0
36.7
34
15
Article Number
966042701
Displacement, cc
389
TURF CUTTER
Article Number
Engine
Honda OHV
Cyclone
Net power
preset rpm
Air filter
6.5
12
Vertical, 35.6 / 14
113
Weight, kg
149
AERATOR
Article Number
966068601
Article Number
163
preset rpm
3.6kW
Air filter
Net power
preset rpm
3.6
Honda GX Series
Air filter
Engine
8x1.75 / 10 x1.75
2.5 / 56
65
Weight, kg
Ergonomic handlebar
Belt drive with disengagement bar
Automatic oil guard
Drive wheel
= Standard
( )
= Optional
AR19
968982102
Displacement, cc
3600rpm
Two stage
DT22H
Displacement, cc
Automatic decompression
Electronic ignition system
Automatic oil guard
Drive wheel
3000rpm
3.6
Automatic decompression
Honda GX Series
4/1
Four-wheel drive
DETHATCHER
Engine
163
3.2kW
6.5 / 46
300
968999533
10 / 10
Weight, kg
Automatic decompression
SC18
Working depth, mm
Two-stage
Adjustable handlebar
Honda GX Series
Displacement, cc
8.7kW @ 3600rpm
Air filter
48 / 15-55
75
SG13
48 / 15-55
BioClip
31.5
Engine
STUMP GRINDER
0.93
Alloy
964000699
Honda OHC
Anti-vibration handle
TABLE KEY:
967256701
Honda OHC
Steel
Collector
967256901
ReadyStart engine
GX560
Steel
LB553SE
Honda OHC
Cutting methods
Net power
LB548SE
967257201
967257301
967257401
967257501
Briggs & Stratton Briggs & Stratton Briggs & Stratton Briggs & Stratton
DOV
DOV
DOV
DOV I/C
2.7
2.7
2.7
2.7
Engine
68
LC19
= Not applicable
118
2.6kW
3600rpm
Two stage
2 / 16.3
2.5
10x6 / 8x2
7.6 / 48
131
NOMINAL POWER
A new machinery directive (2006/42/EC)
came into force on January 1, 2010,
requiring manufacturers to declare the
nominal power of engines, in kilowatts
(kW). The power rating of the engines
indicated is the average net power output
during normal working situations and
fulfilling applicable noise regulations (at
specified rpm, see owners manual) of a
typical production engine for the engine
model measured to SAE standard J
1349/ISO 1585. Mass production engines
may differ from this value. Actual power
output for the engine installed in the final
machine will depend on the operating
speed, environmental conditions and
other variables.
69
LAWN TRACTORS
Lawn Tractors built to help
you make the most of your
garden work.
Our reliable tractors are ideal for efficient lawn care and various tasks around your
property. No two lawns are the same so we have developed a wide range of optional
attachments and a built-in choice of several cutting methods, making our lawn tractors
exceptionally versatile machines. You can choose between three cutting systems collection, BioClip (mulching) and ejection, ensuring the perfect cutting system for
any job.
H Homeowner
L Landowner
C Commercial
70
71
Fender-mounted cutting
height adjustment
Cup holder
Headlights
EASY OPERATION
BLADE ENGAGEMENT
Features specified may or may not be available in selected models - refer to product specifications for details.
72
YEAR-ROUND USE
73
AIR INDUCTION
Efficient machines
that get the work done.
For homeowners who want an efficient and reliable lawn
tractor, this range is the ideal fit. Easy to manoeuvre and
powered by efficient engines, these side-ejection mowers
come feature packed with everything you could possibly
need in a ride-on mower. Easy to drive, Air Induction
cutting decks with spring-assisted lift for simple cutting
height adjustments, deck wash port, ergonomic control
layout - the list goes on. With a range of optional
accessories, all models can be converted to a range of
applications, depending on your needs.
Features specified may or may not be available in selected models - refer to product
specifications for details.
H LTH19530
Husqvarna Endurance Series - 11.1kW@3300rpm - Deck 30/77cm
Foot-pedal hydrostatic, Air Induction, Spring-assist cutting height
adjustment, Pivoting front axle, Adjustable sliding comfort seat,
Hour meter, Deck wash port.
H LTH2038R
Husqvarna Endurance Series - 11.5kW@3300rpm - Deck 38/97cm
Foot-pedal hydrostatic, U-Cut, Air Induction, Spring-assist cutting
height adjustment, Pivoting cast iron front axle, Adjustable sliding
comfort seat, Hour meter, Turf saver tyres.
H LTH2142DR
Husqvarna Endurance Series - 12.2kW@3300rpm - Deck 42/107cm
Foot-pedal hydrostatic, U-Cut,Automatic differential lock, Air
Induction, Spring-assist cutting height adjustment, Electric blade
engagement, Pivoting cast iron front axle, 2 anti-scalp wheels.
H CTH19530
Husqvarna Endurance Series - 11.1kW@3300rpm - Deck 30/77cm
Foot-pedal hydrostatic, Air Induction, Spring-assist cutting height
adjustment, Electric blade engagement, Integrated 200L collector,
Pivoting front axle, Adjustable sliding comfort seat.
H CTH2138R
Husqvarna Endurance Series - 12.2kW@3300rpm - Deck 38/97cm
Foot-pedal hydrostatic, U-Cut, Air Induction, BioClip /mulch
from seat, Spring-assist cutting height adjustment, Electric blade
engagement, Integrated 220L collector, 2 anti-scalp wheels.
75
V-TWIN ENGINES
DIFFERENTIAL LOCK
L YTH2246TDR
Husqvarna Endurance Series V-Twin - 12.8kW@3300rpm
Deck 46/117cm
Foot-pedal hydrostatic, U-Cut, Automatic differential lock, Air
Induction, Electric blade engagement, Cruise control, Adjustable
sliding premium seat, 2 anti-scalp wheels.
L YTH2242TDRF
Husqvarna Endurance Series V-Twin - 12.8kW@3300rpm
Deck 42/107cm
Foot-pedal hydrostatic, U-Cut, Automatic differential lock,
Fabricated deck, Electric blade engagement, Cruise control,
Adjustable sliding premium seat, 2 anti-scalp wheels.
L YTH2648TDRF
Husqvarna Endurance Series V-Twin - 15.3kW@3300rpm
Deck 48/122cm
Foot-pedal hydrostatic, U-Cut, Automatic differential lock,
Fabricated deck, Electric blade engagement, Cruise control,
Adjustable sliding premium seat, Arm rests, 4 anti-scalp wheels.
L GTH3052TDF
Husqvarna Endurance Series V-Twin - 17.2kW@3300rpm
Deck 52/132cm
Foot-pedal hydrostatic, Manual differential lock, Fabricated deck,
Electric blade engagement, Cruise control, Adjustable sliding
premium seat, Arm rests, 4 anti-scalp wheels.
L CTH2642TR
Husqvarna Endurance Series V-Twin - 15.3kW@3300rpm
Deck 42/107cm
Foot-pedal hydrostatic, U-Cut, Air Induction, BioClip /mulch
from seat, Spring-assist cutting height adjustment, Electric blade
engagement, Integrated 320L collector, 4 anti-scalp wheels.
U-CUT STEERING
LAWN TRACTORS
Article Number
Engine
preset rpm
YTH2246TDR
960410282
960410283
960410236
960410272
Husqvarna Endurance
Series
Husqvarna Endurance
Series
Husqvarna Endurance
Series
Husqvarna Endurance
Series
11.1kW
Alternator, A
Single
3300rpm
11.1kW
5/3
3300rpm
5/3
Single
11.5kW
3300rpm
5/3
Single
12.2kW
3300rpm
V-Twin
12.8kW
3300rpm
16
Battery capacity, Ah
20
28
28
28
28
5.7
5.7
5.7
5.7
15.1
Transmission manufacturer
Hydro-Gear
Peerless
Tuff Torq
Tuff Torq
Tuff Torq
Transmission type
Hydrostatic
Manual
Hydrostatic
Hydrostatic
Hydrostatic
0-8.4
0-8.9
0-8.4
0-8.4
0-8.4
0-4.7
0-2.7
0-4.7
0-4.7
0-4.7
13x5 / 16x6.5
15x6 / 18x9.5
15x6 / 20x10
15x6 / 20x10
15x6 / 20x10
16 / 41
8 / 20
8 / 20
8 / 20
8 / 20
119
121.9
121.9
121.9
124
30 / 77
38 / 97
38 / 97
42 / 107
46 / 117
Foot-pedal hydrostatic
38 - 102
38 - 102
2589
38102
38 - 102
Fast transmission
Cruise control
12 volt outlet
Bumper / Brushguard
( )/
Collector / Deflector
78
LTH2142DR
960410169
Single
@
LTH2038R
Husqvarna Endurance
Series
Engine type
Net power
LT19538R
= Standard
( )
= Optional
( )/
( )/
= Not applicable
() /
() /
() /
( )/
( )/
( )/
YTH2242TDRF
YTH2648TDRF
GTH3052TDF
CTH19530
CTH2138R
960410237
960410264
960410285
960510120
960510121
Husqvarna Endurance
Series
Husqvarna Endurance
Series
Husqvarna Endurance
Series
960510119 - AU
960510055 - NZ
Husqvarna Endurance
Series
Husqvarna Endurance
Series
Husqvarna Endurance
Series
V-Twin
12.8kW
3300rpm
16
V-Twin
15.3kW
3300rpm
16
V-Twin
17.2kW
3300rpm
16
Single
11.1kW
3300rpm
5/3
Single
12.2kW
3300rpm
CTH2642TR
V-Twin
15.3kW
3300rpm
16
28
28
28
28
28
28
15.1
15.1
15.1
5.7
5.7
9.5
Tuff Torq
Tuff Torq
Tuff Torq
Hydro-Gear
Tuff Torq
Tuff Torq
Hydrostatic
Hydrostatic
Hydrostatic
Hydrostatic
Hydrostatic
Hydrostatic
0-8.4
0-8.4
08.4
0-8.4
0-8.4
0-8.4
0-4.7
0-4.7
04.7
0-4.7
0-4.7
0-4.7
15x6 / 20x10
15x6 / 20x10
16.5x6 / 23x10.5
13x5-6 / 16x6.5-8
15x6-6 / 18x9.5-8
15x6-6 / 18x9.5-8
8/ 20
8 / 20
18 / 46
16 / 41
8 / 20.3
8 / 20.3
124
124
124
119
119
119
42 / 107
48 / 122
52 / 132
30 / 77
38 / 97
42 / 107
38 - 102
38 - 102
38 - 102
38 - 102
26102
38 - 102
200
220
320
manual
( )/
/ ()
/ ()
() /
() /
() /
/
/ ()
( )/
( )/
( )/
NOMINAL POWER
A new machinery directive (2006/42/EC) came into force on January 1, 2010, requiring manufacturers to declare the nominal power of engines, in kilowatts (kW). The power
rating of the engines indicated is the average net power output during normal working situations and fulfilling applicable noise regulations (at specified rpm, see owners
manual) of a typical production engine for the engine model measured to SAE standard J 1349/ISO 1585. Mass production engines may differ from this value. Actual power
output for the engine installed in the final machine will depend on the operating speed, environmental conditions and other variables.
79
ZERO TURNS
Fast and efficient lawn
mowing with perfect results.
A zero turn mower offers quick results on larger lawns, delivering excellent
manoeuvrability, precise cutting and amazing high capacity. The zero turn steering
system allows the mower to rotate on its own axis, leaving no uncut circle - putting
you in total control of the lawn, no matter what size it is.
H Homeowner
L Landowner
C Commercial
80
81
Collector available as
an accessory
Hour meter with service reminder
Electric blade engagement
Zero-turn steering system
NO UNCUT CIRCLES
EFFICIENT MOWING
EASY-ACCESS SERVICE
Features specified may or may not be available in selected models - refer to product specifications for details.
82
Armrests
Hands-free
deck lift
Rugged frame
COMFORTABLE OPERATION
83
V-TWIN ENGINES
CONTROL PANEL
84
H RZ4222TF
Husqvarna Endurance Series V-Twin - 12.9kW@3350rpm
Deck 42/107cm
Productivity * 2.2 acres/hr, Ergonomic adjustable steering levers,
Fabricated deck, Maintenance free transmission, Removable foot
pan, Electric blade engagement, Digital hour meter.
H RZ4622T
Husqvarna Endurance Series V-Twin - 12.9kW@3350rpm
Deck 46/117cm
Productivity * 2.4 acres/hr, Ergonomic adjustable steering levers, Air
Induction deck, Maintenance free transmission, Removable foot
pan, Electric blade engagement, Digital hour meter.
H RZ4824TF
Husqvarna Endurance Series V-Twin - 14.8kW@3350rpm
Deck 48/122cm
Productivity * 2.5 acres/hr, Ergonomic adjustable steering levers,
Fabricated deck, Maintenance free transmission, Removable foot
pan, Electric blade engagement, Digital hour meter.
H RZ4221
*
Productivity will vary dependant on attainable ground speed, mowing conditions
and height of cut. Productivity (80% efficiency) is calculated by width of cut X
ground speed/120 = Acres per hour.
H RZ5424T
Kawasaki FR Series V-Twin - 17.9kW@3600rpm - Deck 54/137cm
Productivity * 2.8 acres/hr, Ergonomic adjustable steering levers, Air
Induction deck, Maintenance free transmission, Removable foot
pan, Electric blade engagement, Digital hour meter.
REMOVABLE FOOT-PAN
REAR BUMPER
MAINTENANCE FREE
TRANSMISSON
85
L EZ4824TF
Husqvarna Endurance Series V-Twin - 14.8kW@3500rpm
Deck 48/122cm
Productivity * 2.5 acres/hr, Ergonomic adjustable steering levers,
Fabricated deck, Hand-operated deck lift, Durable drive system,
Removable foot pan, Digital hour meter.
L MZ52
Husqvarna Endurance Series V-Twin - 15.4kW@3500rpm
Deck 52/132cm
Productivity * 3.5 acres/hr, Ergonomic adjustable steering levers,
Fabricated deck, Hands-free deck lift, Durable drive system,
Removable foot pan, Digital hour meter, ROPS available as accessory.
L MZT61
Husqvarna Endurance Series Commercial - 16.5kW@3600rpm
Deck 61/155cm
Productivity * 4.9 acres/hr, Ergonomic adjustable steering levers,
Fabricated deck, Hands-free deck lift, Commercial drive system,
Removable foot pan, Digital hour meter, ROPS.
C PZT54
Kawasaki FX Series V-Twin - 18.3kW@3600rpm - Deck 54/137cm
Productivity * 4.2 acres/hr, Commercial duty chassis, Fabricated deck,
Hands-free deck lift, Heavy-duty canister air filter, Over-sized fuel
tank, Easy-access service points, Vibration-isolated platform, ROPS.
C PZ29
Kawasaki FX Series V-Twin - 19.0kW@3600rpm
Deck options 54-61/137-155cm
Productivity * 4.8-5.3 acres/hr, Hydro drive system, Hands-free deck
lift, Heavy-duty canister air filter, Over-sized fuel tank, Easy-access
service points, Vibration-isolated platform, Flat-free castors, ROPS.
C PZ34
Kawasaki FX Series V-Twin - 23.1kW@3600rpm
Deck options 60-72/152-183cm
Productivity * 4.8-5.3 acres/hr, Hydro drive system, Hands-free deck
lift, Heavy-duty canister air filter, Over-sized fuel tank, Easy-access
service points, Vibration-isolated platform, Flat-free castors, ROPS.
EASY-ACCESS CONTROLS
COLLECTOR OPTION
87
RZ4221
RZ4622T
RZ4222TF
RZ5424T
RZ4824TF
Article Number
967176101
967176201
967036501
967003702
967003803
Husqvarna
Endurance Series
Husqvarna
Endurance Series
Husqvarna
Endurance Series
Kawasaki FR Series
Husqvarna
Endurance Series
Single
V-Twin
V-Twin
V-Twin
V-Twin
12.3kW @ 3350rpm
12.9kW @ 3350rpm
12.9kW @ 3350rpm
17.9kW @ 3600rpm
14.8kW @ 3500rpm
Standard OEM
Engine
Engine type
Net power
preset rpm
Air filter
Standard OEM
Standard OEM
Standard OEM
Standard OEM
42" / 107cm
46" / 117cm
42" / 107cm
54" / 137cm
48" / 122cm
38.0 102.0
38.1 102.0
38.1 101.6
38.1 114.3
38.0 102.0
Hand-operated
Hand-operated
Hand-operated
Hand-operated
Hand-operated
Stamped 13 Gauge
Stamped 13 Gauge
Fabricated 11 Gauge
Stamped 12 Gauge
Fabricated 11 Gauge
105
105
90
105
EZT
EZT
EZT
EZT
EZT
010.5 / 05.6
010.5 / 05.6
010.5 / 05.6
010.5 / 05.6
010.5 / 05.6
11 x 4-5
11 x 4-5
11 x 4-5
11 x 6-5
11 x 6-5
18 x 7.5-8
18 x 8.5-8
18 x 8.5-8
18 x 9.5-8
18 x 9.5-8
11.4
11.4
13.3
13.3
11.4
195
263.1
263.1
290.3
269.9
109.2
121.9
109.2
144.8
123.2
190.5 / 111.7
190.5 / 101.6
190.5 / 101.6
190.5 / 101.6
190.5 / 101.6
2.2
2.4
2.2
2.8
2.5
Standard
Standard
Standard
Standard
Standard
Heavy-duty dampeners
Foldable ROPS
Drink holder
( )
()
( )
()
( )
()
( )
()
()
ACCESSORIES
Mulch Kit
Collection system
Optional blades
Suspension seat
( )
( )
( )
( )
( )
( )
Productivity will vary dependant on attainable ground speed, mowing conditions and height of cut. Productivity (80% efficiency) is calculated by width of cut X ground speed/120 = Acres per hour.
88
EZ4824TF
MZ52
MZT61
PZT54
PZ29
PZ34
966659502
967277403
967177009
966613403
966553801
966553901
Husqvarna
Endurance Series
Husqvarna
Endurance Series
Husqvarna
Endurance Series
Commercial
Kawasaki FX Series
Kawasaki FX Series
Kawasaki FX Series
V-Twin
V-Twin
V-Twin
V-Twin
V-Twin
V-Twin
14.8kW @ 3500rpm
15.4kW @ 3500rpm
16.5kW @ 3600rpm
18.3kW @ 3600rpm
19.0kW @ 3600rpm
23.1kW @ 3600rpm
Standard OEM
Standard OEM
Standard OEM
Heavy-Duty Canister
Heavy-Duty Canister
Heavy-Duty Canister
48" / 122cm
52" / 132cm
61" / 155cm
54" / 137cm
54 - 61" / 137-155cm
60 - 72" / 152-183cm
38.1 114.3
38.1 114.3
38.1 114.3
38.1 - 139.7
25.0 127.0
25.0 127.0
Hand-operated
Foot-activated
Foot-activated
Foot-activated
Foot-activated
Foot-activated
4-5
5-6
Fabricated 11 Gauge
Fabricated 11 Gauge
Fabricated 11 Gauge
Fabricated 10 Gauge
105
200
200
150
250
250
ZT2800
ZT3100
ZT3400
ZT3400
12/197 - 18/295
16/262 - 18/295
010.5 / 05.6
0-13.7 / 0-8.0
0-16.1 / 0-8.1
0-16.1 / 0-8.0
019.3 / 09.7
019.3 / 09.7
11 x 6-5
13 x 6.5-6
13 x 6.5-6
13 x 6.5-5
20 x 8-8
22 x 10-10
23 x 10.5-12
23 x 10.5-12
23 x 10.5-12
24 x 12-12
13.3
18.9
18.9
41.6
41.6
41.6
5.7
5.7
290
335.7
358.3
485.4
572 - 599
599 - 635
123.2
137.2
158.2
135.9
189.2 / 119.4
191.8 / 106.7
191.8 / 115.6
205.7 / 116.8
209.5 / 120.6
2.5
3.5
4.9
4.2
4.8 - 5.3
5.8 - 7.0
PZ Premium Suspension
PZ Premium Suspension
( )
()
()
()
()
( )
( )
( )
( )
()
()
()
209.6 / 120.7
()
( )
( )
( )
( )
( )
( )
( )
( )
NOMINAL POWER
A new machinery directive (2006/42/EC) came into force on January 1, 2010, requiring manufacturers to declare the nominal power of engines, in kilowatts (kW).
The power rating of the engines indicated is the average net power output during a normal working situations and fulfilling applicable noise regulations (at specified
rpm, see owners manual) of a typical production engine for the engine model measured to SAE standard J 1349/ISO 1585. Mass production engines may differ
from this value. Actual power output for the engine installed in the final machine will depend on the operating speed, environmental conditions and other variables.
TABLE KEY:
= Standard
( )
= Optional
= Not applicable
89
RIDERS
Even the largest lawns
will seem small.
Lawn mowing can be tough and time consuming, especially if the lawn is large or if
there are obstacles. Using a Husqvarna Rider with its articulated steering and frontmounted cutting deck, the combination of control, comfort and efficiency will make
your ride extremely enjoyable. With features like All Wheel Drive, its hard to find
places that these machines arent able to reach.
H Homeowner
L Landowner
C Commercial
90
91
Hour meter
Four equally
sized wheels
Articulated steering
Pivoting rear axle
Pedal-operated
hydrostatic
transmission
Robust chassis
All-Wheel-Drive
SUPERIOR MANOEUVRABILITY
MOWING ACCESSIBILITY
Features specified may or may not be available in selected models - refer to product specifications for details.
92
Power steering
Attachment frame
Headlights
Storage compartment
External fuel cap
with big diameter
Front-mounted
Combi cutting deck
SERVICE POSITION
DRIVERS POSITION
EASY-ACCESS CONTROLS
93
FRONT-MOUNTED DECK
REAR-WHEEL DRIVE
94
H R120C
Husqvarna Endurance Series - 10.2kW@2900rpm - 95cm Cutting
Deck, Articulated steering, Foot-pedal hydrostatic, Rear wheel
drive, Combi deck/BioClip cutting system, External fuel cap,
Single-lever cutting height adjustment, Easy-access service points.
H R216
Husqvarna Endurance Series 9.6kW@2900rpm - 94cm Cutting
Deck, Articulated steering, Foot-pedal hydrostatic, Rear wheel
drive, Combi deck/BioClip cutting system, External fuel cap, Singlelever cutting height adjustment, Easy-access service points.
L R220T
Husqvarna Endurance Series V-Twin - 12.6kW@3000rpm - 103cm
Cutting Deck, Articulated steering, Foot-pedal hydrostatic, Rear
wheel drive, Combi deck/BioClip cutting system, External fuel cap,
Single-lever cutting height adjustment, Easy-access service points.
L R322TAWD
Husqvarna Endurance Series V-Twin - 12.6kW@3000rpm - 112cm
Cutting Deck, All Wheel Drive, Articulated steering, Foot-pedal
hydrostatic, Combi deck/BioClip cutting system, External fuel cap,
Single-lever cutting height adjustment, Easy-access service points.
BLADE ENGAGEMENT
HYDROSTATIC TRANSMISSION
95
POWER STEERING
96
C R422TSAWD
Husqvarna Endurance Series V-Twin - 12.6kW@3000rpm 112/122cm Cutting Deck options, All Wheel Drive, Articulated power
steering, Hydraulic equipment lift, Pivoting support wheels, Combi
Turf cutting deck options, Quick coupling, Easy-access service points.
C P524
Kawasaki FX Series V-Twin - 13.9kW@3000rpm - 112-122cm Cutting
Deck options, All Wheel Drive, Articulated steering, Hydraulic
power steering, Commercial graded transmission, Durable ladder
frame, Combi Turf cutting deck options, Quick coupling, Easy-access
service points.
TESTED LIKE S
HE AV Y TRUCK
C P525D
Kubota Diesel - 18.7kW@3000rpm - 132-155cm Cutting Deck options,
All Wheel Drive, Articulated steering, Hydraulic power steering,
Commercial graded transmission, Durable ladder frame, Shaft PTO, Low
profile cutting decks, Flat-free support wheels, Quick coupling.
ATTACHMENT FRAME
UNMATCHED COMFORT
COMBI DECK
97
R120C
Article Number
Engine manufacturer
Engine type
Net power
preset rpm
Alternator, A
R216
R220T
R322TAWD
R422TSAWD
P524
P525D
967178601
967330801
967189401
967189601
966772901
966607201
966607401
Briggs & Stratton
Husqvarna
Husqvarna
Husqvarna
Husqvarna
Kubota Diesel
Intek
Endurance Series Endurance Series Endurance Series Kawasaki FX Series
Endurance Series
Single Cylinder
Single Cylinder
V-Twin
V-Twin
V-Twin
V-Twin
3 Cylinder
12.6 kW @ 3000 12.6kW @ 2900rpm 13.9kW @ 3000rpm 18.7kW @ 3000rpm
10.2kW @ 2900 9.6kW @ 2900 rpm 12.6 kW @ 3000
rpm
rpm
rpm
3
3
16
16
16
20
40
12 / 21
12V / 24 Ah
12 / 24
12 / 24
12/24
12/24
12 / 62
12
12
12
17
24
25
Hydrostatic
Hydrostatic
Hydrostatic
Hydrostatic AWD
Hydrostatic AWD
Hydrostatic AWD
Hydrostatic AWD
Transmission manufacturer
Tuff Torq
Tuff Torq
Tuff Torq
Tuff Torq
Kanzaki K664
Kanzaki KTM23
Kanzaki KTM23
165/60-8
165/60-8
165/60-8
165/60-8
195/65-8
18x8.58"
20x10-10"
Cutting width, cm
95
94
103
112
112 - 122
112 - 122
132 - 155
Cutting height, mm
25 - 75
25 - 75
25 - 75
25 - 75
25 - 75
25 - 75
25 - 127
84.5
88.7
88.7
88.7
100
100
106
84
99
85
85
88
88
92
Width/height/length, base
machine, cm
126*/108/229
89/107/190
89/107/190
89/115/202
90/166/207
98/115/205
114/133/211
385
675
Transmission
221*
198
235.9
259
330
2 Stage Canister
Dual Element
2 Stage Canister
2 Stage Canister
2 Stage Canister
Premium w/ arm
rests
Seat type
Standard
Standard
Standard
Power steering
All-Wheel-Drive (AWD)
Oil Cooler
Attachment Frame
Service position
Roll-Over-Protection
(ROPS)
Headlights
Quick connection
Hour meter
12V outlet
( )
Shaft PTO
CombiClip 103
CombiClip 112
( )/( )
( )/( )
( )/( )
NOMINAL POWER
A new machinery directive (2006/42/EC) came into force on January 1, 2010, requiring manufacturers to declare the nominal power of engines, in kilowatts (kW). The power
rating of the engines indicated is the average net power output during a normal working situations and fulfilling applicable noise regulations (at specified rpm, see owners
manual) of a typical production engine for the engine model measured to SAE standard J 1349/ISO 1585. Mass production engines may differ from this value. Actual
power output for the engine installed in the final machine will depend on the operating speed, environmental conditions and other variables.
TABLE KEY:
98
= Standard
( )
= Optional
= Not applicable
99
100
TECHNICAL JACKET
CL ASSIC JACKET
578 16 60-46
578 16 60-50
578 16 60-54
578 16 60-58
578 16 60-62
578 16 53-46
578 16 53-50
578 16 53-54
578 16 53-58
578 16 53-62
TECHNICAL TROUSERS
CL ASSIC TROUSERS
IT Y
HIGH DURABILRT
FO
M
AND CO
101
FM RADIO EARMUFF
102
579 38 02-07
579 38 02-08
579 38 02-09
579 38 02-10
579 38 02-12
Size 7
Size 8
Size 9
Size 10
Size 12
PREMIUM EARMUFF
GARDEN EARMUFF
AU Size
EU size
575 35 47-36
575 35 47-37
575 35 47-38
575 35 47-39
575 35 47-40
575 35 47-41
575 35 47-42
575 35 47-43
575 35 47-44
575 35 47-45
575 35 47-46
575 35 47-47
Size 3
Size 4
Size 5
Size 5 1/2
Size 6 1/2
Size 7 1/2
Size 8
Size 9
Size 9 1/2
Size 10 1/2
Size 11
Size 12
36
37
38
39
40
41
42
43
44
45
46
47
AU Size
Size 4
Size 5
Size 5 1/2
Size 6 1/2
Size 7 1/2
Size 8
Size 9
Size 9 1/2
Size 10 1/2
Size 11
Size 12
PROTECTIVE EYEWEAR
EU size
37
38
39
40
41
42
43
44
45
46
47
WEDGES
Professional range of high quality felling and
splitting wedges. Choice of tough polyamide,
magnesium* or steel*.
505 69 47-02 5 Plastic Wedge, 14cm
505 69 47-00* 5 Magnesium Wedge, 12cm
577 25 92-01* Curved Steel Splitting Wedge
576 92 99-01* 7 Aluminium Wedge,500gm
505 69 47-03 8 Plastic Wedge, 20cm
505 69 47-04 10 Plastic Wedge, 25cm
576 92 99-02* 10 Aluminium Wedge,800gm
608 20 10-02 12 Woodgrain Plastic Wedge
BREAKING BARS
* Available in Australia only.
Fully forged with plastic handle, repeat heel
and turning hook.
505 69 43-01 Breaking Bar, 76cm.
574 38 72-01 Impact Bar (Long), 130cm
504 98 16-92** Telescopic Breaking Bar
** Available in New Zealand only.
CARRY CASE
Sturdy, stackable design with moulded
compartments to hold accessories. Comes
standard with 18-20 guide bar cover. Fits up
to model 576XP.
502 67 49-01 Carry Case
FILING KITS
The file kits contain a file handle,
HANDSAWS
combination gauge - or a file gauge and depth
Designed with hard chrome plated blade gauge - two round files and one flat file.
for high corrosion protection and abrasion
505 69 81-25 .325
resistance. The ergonomic handle features soft
505 69 81-27 .325 Pixel
components for a better grip.
505 69 81-30 3/8
967 23 64-01 Foldable 200FO
505 69 81-38 3/8 Low Profile (mini)
967 23 65-01 Fixed Straight 300ST
505 69 81-92 .404
967 23 66-01 Fixed Curved 300CU
103
AERATOR
SPRE ADER
954 12 00-46
967 02 72-01
Spreader 30
Spreader 75
FLAIL MOWER
FL AIL MOWER
BRUSH
UTILIT Y BUCKET
HYDRAULIC KIT
ROAD KIT
Complete road kit designed for safe transport on public roads to and from work sites. Kit includes control
box, rotating beacon light, position and touring lights (front and rear) and number plate light kit.
585 31 87-01 Road Kit - P525D
Visit www.husqvarna.com to read more about our products, view comparison charts,
videos, accessories and to locate your local authorised Servicing Dealer.
104
COUNTER WEIGHT
SE AT COVER
Seat Cover
TRACTOR SCOOP
SIGNAL BOOSTER
TRAILER
Trailer
DEFLEC TOR
576 21 74-01
Tractor Scoop
COLLEC TORS
522 42 58-01
COVER
ROPS SYSTEM
AUTOMOWER HOUSE
105
HP TWO-STROKE OIL
Designed to meet all the tough challenges a twostroke engine oil can encounter. It lowers high
temperature caused by low-quality fuel and
reduces the coating and wear and tear on the
bearings and cylinder walls. The oil is a mix of
mineral and synthetic oils, and the additives are
of the highest quality. HP is designed for use with
all Husqvarna two-stroke products. Complies
with JASO FB / ISO EGB.
544 01 58-09
544 01 58-10
0.1 Litre
1 Litre dosage bottle
4 Litres
Mineral chain oil with adhesive agent for highperformance chain saws. Made from a premium
blend of base stocks and tackifier additives which
reduces high speed throw off. Extends bar, chain
and sprocket life.
579 39 60-01
579 39 61-01
579 39 62-01
1 Litre
5 Litres
20 Litres
1 Litre
5 Litres
20 Litres
106
555 50 00-81
502 71 89-01
504 70 53-01
531 00 92-48
HUSQVARNA COMBICAN
Holds 6 litres of petrol & 2.5 litres of chain oil.
Features effective overfill protection. Approved
in accordance with UN regulations.
505 69 80-00
505 69 80-11
505 69 80-02
505 69 80-03
505 69 80-05
Combican
Rep. Cap - Combican Assembly
Non Spill Spout - Petrol
Replacement Oil Spout
Sealing Ring
This unique combi can holds 6 litres of petrol and 2.5 litres of oil. The fuel container has an efficient overfill protection.
Approved in accordance with UN recommendations.
505 69 80-00
Combi Can
The combi can has a smart design. The fuel and oil
containers can be separated from each other, and
between them theres space for files and other tools.
107
www.husqvarna.com
Husqvarna Australia Pty Ltd. ABN 45 115 475 619
Locked Bag 5, Central Coast BC NSW 2252. Phone: 02 4352 7400. Fax: 02 4352 7499
Husqvarna New Zealand Ltd. Company No. 111 861.
PO Box 76-437, Manukau City, Auckland 2241. Phone: 09 920 2410. Fax: 09 920 2429.
Part Number:
Comm Ref: