Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Z-Audio
SMART-HDL
Features
Internal FM Radio
Connection diagrams
Connection diagrams
Programming
Programming
Step2: check IP address ,Route IP and Port setting(Port: 6000 is a
default factory setting, not need to modification )
Make sure that the IP of Z-Audio, PC, 1PROT are in the same
network segment (e.g. 192.168.10.*).
Programming
Step3: Refresh Playlists
Create folders in SD-card, and save mp3 music files in these folders,
each folder is a playlist in Z-audio, and Z-Audio can only play the
music files which were saved in folders.
Programming
Step4: Functions select and Radio Settings
Enabled function(s) will be shown on the DLP music page.
Programming
Step5: FTP setting(need to install a FTP server for Z-Audio ).
After FTP setting, please refresh the playlists on Playing Music
Setting Label.
Programming
Step6: Programming on Z-Audio finished.
Step7: Set on DLPs Music page label, add Z-Audios subnet ID and
device ID, and Zone No.(Zone No.: each DLP can control 24 ZAudio, so DLP has 24 Zone No. for Z-Audio control.)