Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
com
External Alarm
Relays panel
Application
Interfaces with annunciation devices to warn of
alarm conditions.
Triggers remote alarm signal in the control room
and/or unit panel
Features
Description
The External Alarm Relays Panel warns operations/
maintenance personnel of alarm conditions on air gap and high
speed parameters.
The External Alarm Relays Panel is a 19 inches
rack-mounted panel which holds rail-mounted relays that are
connected to the ZPUTM/PCUTM-5000 relays drivers and
energized on alarm detection. If the ZPUTM/PCUTM-5000 detects
an alarm on a parameter, the system sends a triggering signal
to the appropriate relay module in the External Alarm Relays
Panel (up to 34 relays). Each relay module contains
conditioning circuitry and a SPDT relay.
www.vibrosystm.com
85
90
47
30
264 VAC or
350 VDC
63 Hz
Watts
Relay Module
Relay Coil
24 VDC
Ic nominal
9 mA
LED ON :
LED OFF :
Relay energized
Relay de-energized
0C 60C
(32F 140F)
Storage temperature
-30C 80C
(-20F 175F)
Electrical Connections
Type
Wire Gage
Physical Characteristics
Assembly panel
Height
Width
Depth
133.4 mm
482.6 mm
137.2 mm
(5.25 in.)
(19.00 in.)
(5.40 in.)
- LO alert
NPN open-collector
(40Vmax./250mA max.)
- HI alert
NPN open-collector
(40Vmax./250mA max.)
- LOLO danger
NPN open-collector
(40Vmax./250mA max.)
- HIHI danger
NPN open-collector
(40Vmax./250mA max.).
VibroSystM reserves the right to change specifications to improve products without notification.
Copyright 2010, All rights reserved.
Published: 09.03.11
Revised: