Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
2008-2009
$5.00
GOV
made in the usa
BattleLab ®
®
a subsidiary of diamondback tactical™
the highest quality tactical nylon made in the usa
www.diamondbacktactical.com
BTL 2007 Catalog 2008A.qxd 3/1/08 1:08 AM Page 2
All of us at BattleLab
GOV
FEATURED PRODUCTS
4 29 52
12 39 54
GOV
PRAETORIAN™ R.B.V. PREDATOR® AW-FAPC
ARMOR
BATTLELAB® PRAETORIAN™ RAPID made in the usa
CUTAWAY BALLISTIC VEST
The Praetorian® Rapid Cutaway Ballistic
Vest is the finest quick release ballistic
armor system in the world. The
Praetorian incorporates the revolutionary
Single Wire Release System first
introduced by Diamondback Tactical™.
The single wire allows the vest to
separate in seconds and with the simple
one wire design, reassembly takes just a
few minutes. It features a super-strong
hook and loop front closure that makes
securing the vest simple and easy with
no zipper to jam or break. The exclusive
low profile front pocket is perfect for
holding your pistol, extra mags and
other essential pieces of equipment. The
cummerbund adjustment system is
extremely user-friendly and allows the
vest to be perfectly adjusted without
disassembly while the user is wearing it.
The cummerbund features soft armor
insert pockets as well as side armor
plate pockets. Reinforced hard
polyurethane stress members along its
length prevent it from twisting or
sagging under gear load.
V-PRAS-QVA3A
$1,495.95
V-PRAS-LTA3A
$1,295.95
ARMOR
Features:
• Single wire ambidextrous quick release allows for made in the usa
ARMOR
made in the usa
Flotation Inserts Shoulders, Collar, Yoke, Groin and Lower Back Panels
Internal Cummerbund (right)
Shoulder Release/
Side Armor Pockets Adjuster Straps
MD3196-CYT
$299.95
Call for qty. discounts and Government pricing GOV
ARMOR
These Level IIIA ballistic panels made by Custom Armor Technologies meet and exceed NIJ standards for
ballistic performance. made in the usa
P-SPR-QVA3A
$799.95
P-SPR-LTA3A
$695.95
KIT-PRAS-FL-0001
$79.95
Call for qty. discounts and Government pricing GOV
ARMOR
THE ALL NEW R.B.V. – PREDATOR®
BALLISTIC VEST – NIJ LEVEL 3A made in the usa
(Patent #D516,777)
When the original Predator vest was first introduced in
2004, it quickly became the standard by which all
other tactical vests would be judged. As good as the
original Predator was, we were not content to rest on
our laurels. With increased coverage and a higher
level of comfort, our new Predator is far and away the
most impressive tactical vest on the market today.
Sharing many of the design features of our all new
Praetorian RCBV (Rapid Cutaway Ballistic Vest), the
Predator was designed to meet the needs of operators
for an all-encompassing tactical vest with increased
load carry capacity, mobility, speed, and ease of
adjustability.
The Predator Ballistic Vest is loaded with new
features including:
• SPEAR cut armor (as used by Special Operations
Command) for increased ballistic coverage
• Enlarged/integrated front flap external
cummerbund closure
• Low profile front flap pouch for additional carry
capacity (sidearm, ammo, etc.)
• Super reinforced drag handle
• Extended, adjustable, foam-padded shoulder
straps with Dry-Lex® lining for increased comfort
and moisture wicking
• Breathable, durable, mesh liner for extra comfort
and reduced weight
• Side armor plate pockets
• Soft armor pockets in external cummerbund
• Comm. Wire channels
• Rigid strength member along edges of external
cummerbund to prevent sagging
Colors: ACU Digital, Coyote Brown, Ranger Green,
CRYE and Black
Sizes: Small, Medium, Medium/Long, Large, XL, XXL
V-PRED2-LTA $995.95
V-PRED2-SQVA $1095.95
V-PRED2-QVA $1195.95
ARMOR
AVAILABLE OPTIONAL POCKETS AVAILABLE OPTIONAL BALLISTICS
(for use in front flap): • Side Cummerbund Level 3A soft
• Holster (Fits Most Frames) armor inserts
ARMOR
BATTLELAB® ADVANCED WARRIOR - FAST ATTACK PLATE CARRIER (AW-FAPC)
The original F.A.P.C. was a great success with thousands currently in use by our Military, Law Enforcement, Contractors,
Diplomats, OGA, and Coalition Partners. A majority of these customers also bought the Fast Attack Rack cummerbund
system. With that in mind, we have created a vastly improved Rack system. The all-new Advanced Warrior Fast Attack
Plate Carrier includes the plate carrier chassis and the cummerbund. It is more comfortable, a better load carry platform,
easier to don and adjust, yet remains very affordable.
Features
• Fully padded shoulders featuring DryLex® and a
vastly improved adjustment system
• Fully lined with a unique, breathable "spacer"
material allowing increased airflow and reducing
thermal load on the body
• An integrated and enlarged front flap
cummerbund closure, featuring a low profile
pocket and pouch system based on the BattleLab
Praetorian® RCBV and Predator Gen 2 designs
• Improved side closure system featuring "pull
forward" adjustment
• Reinforced drag handle
• Integrated Soft Armor Ballistics with either
(QVA-3A, LTA-3A or EMA-3A)
• Optional Integrated soft armor panels for the
shoulders and armored cummerbund adding
increased overall protection for the wearer.
made
madeininthe
theusa
usa Call for qty. discounts and Government pricing GOV
ARMOR
BATTLELAB® ADVANCED WARRIOR - FAST ATTACK PLATE CARRIER (AW-FAPC)
Optional Pouches Available For
Use in the Front Low Profile
Pocket (See Page 13)
Colors: ACU Digital, Coyote Brown,
Ranger Green, Black and CRYE
V-AW-FAPC $364.95
(with either QVA or
EMA Ballistic Packages)
Optional cummerbund
V-AW-FAPC $344.95 attachment system
(with LTA Ballistic Package)
Available Optional Accessories
and Ballistics (Call for Details
and Armor Specifications)
Shoulder Armor Inserts
SAI-2-QVA or EMA
$59.95 (set)
SAI-2-LTA
$49.95 (set)
Side Cummerbund System
SCS $119.95 Integrated front flap
cummerbund closure
Side Cummerbund
Armor Panels (6” x 12”)
SCS-612-QVA or EMA
$124.95 (set)
SCS-612-LTA
$99.95 (set)
Side Plate Pocket
Armor Panels (6” x 8”)
P-POSPC-QVA or EMA
$99.95 (set)
P-POSPC-LTA
$89.95 (set) Plate pocket & DryLex
breathable liner
made in the usa Call for qty. discounts and Government pricing GOV
ARMOR
BATTLELAB® FAST ATTACK PLATE CARRIER – GEN 2 (F.A.P.C-2)
The Fast Attack Plate Carrier Gen. 2 was designed to meet the needs of operators who want a high mobility plate carrier
with great load carrying capacity. The F.A.P.C-2 has 1/4" closed cell foam in both the shoulders and upper torso regions
to relieve load stress on the operator’s back and shoulders. It also allows for quick adjustments and modifications when
loads, clothing or operational positions change. Available with optional Level 3A inserts (below). Optional Pouches
Available For Use in the Front Flap. (See Page 13)
Colors: ACU Digital, Coyote Brown,
Ranger Green, Black and CRYE
Available Optional
Accessories and Ballistics
(Call for Details and
Armor Specifications)
Textured padding
Side Cummerbund System
SCS $119.95
BATTLELAB KITS
BATTLELAB® ACCESSORY PLATFORM POUCHES
made in the usa
Predator, Praetorian and A/E-FAPC Products
When we created our new line of
ballistic platforms, we wanted them
to be the most comfortable, versatile,
user-friendly vests you will ever
wear. To that end, we have also
created a brand new series of
specialty pouches to complement
these platforms that are
interchangeable between any
of the three.
BattleLab® M4/M16 Open Top Shorty Mag Pouch BattleLab® Double 9mm Pistol Mag Pouch
BLPL04-SP $15.95 BLPL08-1-SP $26.95
BattleLab® SR25 Open Top Mag Pouch BattleLab® Sniper 308 Ammo Pouch
BLPL04-1-SP $16.95 (Holds 20 Rnd. Box)
BLPL308-SP $26.95
BattleLab® Utility Pouch Zipper Conversion Kit
BLPL41-SP $16.95 BattleLab® 50 Cal. Barrett Open Top Mag Pouch
BLPL24-SP $18.95
BattleLab® Shotgun Open Top Conversion Kit
(Holds 9 Shells) BattleLab® Cross Draw Holster
BLPL29-9-SP $19.95 BLPL35-SP $15.95
Call for qty. discounts and Government pricing GOV
ARMOR
ARMORED WARRIOR®
The Armored Warrior® System was created as a direct
result of feedback from operators wishing to have a
greater amount of ballistic protection from rifle
threats and fragmentation while maintaining the
highest amount of mobility.
ARMOR
ARMORED WARRIOR® TORSO SIDE PLATES ARMORED WARRIOR® FOREARM PROTECTOR
(Patent #7,266,850) (Patent Pending)
The Armored Warrior® Torso Side Plates are your The one-size-fits-most Armored Warrior® Forearm
solution for minimizing torso penetration of rounds Protector was developed by Custom Technologies™ to
and fragmentation through the side. Offered in three meet the requirements of the Special Operations
sizes to allow maximum versatility in the coverage community. The intent of the Armored Warrior® Forearm
area, the TSPs can help provide mid and lower thoracic Protector is to provide much-needed protection to the
(lung/stomach) protection by using a single plate or portions of the forearms that are exposed when using a
through the use of multiple plates. They provide pistol, M4/M16 or an M2 while in the turret of a HMMV on
excellent additional protection for vehicle work, from mounted patrol or escort. The Armored Warrior® Forearm
IEDs, and roadside ambushes. Utilizing TSPs, an Protector comes in two models, each providing their own
operator can increase the amount of rifle protection by level of protection. The first protects against
more than 50% over the use of two standard 10" x 12" fragmentation and small arms rounds and the second
ballistic rifle plates alone. provides protection against 7.62 x 39 (AK47) as well as
fragmentation and small arms rounds. Both models are
TSP Features designed for comfort and minimal weight. The interior
• Utilize current modular attachment system side is made of Drylex™ material for comfort and slip
• MOLLE platform on external side affording additional resistance. The top, or outward-facing part, is covered in
equipment mounting loop pile for placing IR tabs, identification, etc.
• Multiple sized plates can be worn solo or as a
system for custom coverage 3A & Fragmentation (LTA-3A)
Weight: (6 oz. each/12 oz. set)
Protection Level: 7.62Plus Size: (One Size)
5.45 x 39mm AK74 7.62 x 39mm MSC AW-LSF-3A
5.56 x 45mm M193 7.62 x 54mm LPS $139.95 (set)
5.56 x 45mm M855
3A & 7.62 x 39
Colors: ACU Digital, Coyote Brown, Ranger Green, Weight: (1 lb. each/2 lbs. set)
CRYE and Black Size: (One Size)
AW-LSF-762
AW-TSP-Small $239.95 (set)
Dimension: 4.25"W x 6"H
Weight: 1.30 lbs. each plate
AW-TSP-S
$232.95 Set
AW-TSP-Medium
Dimension: 6.50"W x 6"H
Weight: 2.25 lbs. each plate
AW-TSP-M
$272.95 Set
AW-TSP-Large
Dimension: 6.50"W x 8"H
Weight: 2.90 lbs. each plate
AW-TSP-L
$312.95 Set
made in the usa Call for qty. discounts and Government pricing GOV
ARMOR
CAT NAPP ARMORED WARRIOR® BALLISTIC SHOULDER
BICEP PROTECTION
(Patent Pending)
The AW-CAT NAPP is a revolutionary solution for (Patent Pending)
minimizing lower torso ballistic penetration through the The AW-BSBP helps stop the penetration of rounds and
frontal pelvic area. The pelvic region is "super vascular" in fragmentation through the shoulder / bicep area that
nature because it is where the upper femoral arteries, iliac could perforate the heart or lungs. The base platform
arteries, and the abdominal aorta are located. Because of contains a soft armor insert (LTA3A) to defeat frag and
this, ballistic injuries to this area have a high mortality rate. handgun/sub-gun threats. In addition to the soft armor
When an artery is severed, the body automatically responds insert, the BSBP also holds our "7.62Plus" plate to defeat
by retracting the artery and shutting down the flow of rifle rounds. The BSBP is designed and adjustable to fit
blood. Though this is very serious, it is even worse when all sizes.
bullets, fragmentation impact, or bone spalling tear an
artery. With a torn artery, the body does not automatically • Only 3/8" thick for a low profile and less bulk.
restrict blood flow to the extremities and continues to • Utilizes adjustable 2"elastic arm band to fit all biceps.
function as it normally would. This can lead to massive • Loop mount makes for easy donning & doffing of
blood loss and even death within minutes if not adequately most armor vests.
treated. The CAT NAPP is designed to greatly reduce the
chance of this happening. Offered in a single size with Protection Level
multiple staggered belt loops to adjust for torso length, the 7.62Plus
CAT NAPP closes the gap and, in fact, overlaps the bottom Dimensions: 12"W x 10"H
of the vest plate, reducing the exposed and critically Weight: 1.0 lbs.
vulnerable lower abdomen/pelvic area. Protection Level: N.I.J. III-A / USASOC Frag.
Rifle Plate Dimension: 4.25"W x 6"H
• Less than 1/4" thick for an extremely low profile and Weight: 1.25 lbs.
less bulk Protection Level
• Belt mount reduces back fatigue and weight distribution 5.45 x 39mm AK74 7.62 x 39mm MSC
issues on armor vest 5.56 x 45mm M193 7.62 x 54mm LPS
• PALS webbing platform on external side affords 5.56 x 45mm M855
additional equipment mounting
• Torso length can be supplemented by the AW-LBA for Colors: ACU Digital, Coyote Brown, Ranger Green,
longer torsos CRYE and Black
AW-CAT-NAPP $295.95
made in the usa Call for qty. discounts and Government pricing GOV
ARMOR
BALLISTIC DROP LEG PLATFORM ARMORED WARRIOR® LOWER BACK ARMOR
made in the usa
(Patent Pending) (Patent Pending)
The AW-BDLP and BLPF55-2 help stop the penetration of The Armored Warrior® Lower Back Armor provides
rounds and fragmentation in the hip/thigh area. It is additional 9mm, ballistic rifle and frag protection to the
designed to fit all sizes and helps stop rounds and lower back/ pelvic region. It is available in two levels
fragmentation from penetrating thighs and severing or of protection and three sizes to allow maximum area of
tearing femoral arteries. coverage. Choose either Level IIIA soft armor panels for
• Only 3/8" overall thickness for a low profile and less bulk protection against hand gun and fragmentation threats,
• Utilizes adjustable 2"elastic & webbing leg band to fit all or steel plate for rifle protection of the lower spine and
size thighs plus loop mount makes for easy donning & kidney region.
doffing of most gunbelts • Utilizes current modular attachment system
• Excellent protection for vehicle work, IEDs and • Multiple panel design articulates for use in vehicles
roadside ambushes while seated
AW Ballistic Drop Leg Platform with Rifle Plate • Overlaps existing assault plate for extended rifle
Protection Level: 7.62Plus protection (plate version) with no ballistics gaps
Dimensions: 8"W x 10"H • Can also be utilized on abdomen supplementing the
Weight: .90 lb AW-CAT NAPP for longer torsos
Protection Level: N.I.J. III-A / USASOC Frag. • Protection Level: 7.62Plus
Rifle Plate Dim.: 4.25"W x 6"H Model No. # Plates Dimension Weight
Weight: 1.25 lbs. Size: One Size AW-LBA-Sml. 1 11.25"W x 3.75" 1.8 lbs
Protection Level AW-LBA-Med. 2 11.25"W x 7"H 3.6 lbs.
5.45 x 39mm AK74 7.62 x 39mm MSC AW-LBA-Lrg. 3 11.25"W x 10"H 5.4 lbs.
5.56 x 45mm M193 7.62 x 54mm LPS Protection Level
5.56 x 45mm M855 5.45 x 39mm AK74 7.62 x 39mm MSC
Colors: ACU Digital, Coyote Brown, Ranger Green, 5.56 x 45mm M193 7.62 x 54mm LPS
CRYE and Black 5.56 x 45mm M855
Colors: ACU Digital, Coyote Brown, Ranger Green,
KIT-BLPF55 CRYE and Black
$249.95 per
$489.95 set A-LBAS $145.95
(Single Rifle Protection Plate)
A-LBAD $289.95
(Double Rifle Protection Plate)
A-LBAT $399.95
(Triple Rifle Protection Plate)
ARMOR
DBT ESAPI “SHOOTERS CUT” BALLISTIC PLATE made in the usa
This is one of the best performing plates we have ever seen. The Enhanced Small Arms Protective Insert (ESAPI) is
manufactured from a ceramic core backed with a high performance composite layered fiber. Available in 8” x 10” or
10” x 12”. Multi Hit Protection Against: 7.62x63mm - APM2. Weight: 6.25 lbs. Color: Blue
DBT-ESP810 (8” x 10”) $624.95
DBT-ESP1012 (10” x 12”) $659.95
ARMOR
ENHANCED MULTI HIT BALLISTIC PLATE (10 HIT)
made in the usa
Weight
3.55 lbs. Small 8" x 10"
4.05 lbs. Medium 10" x 12"
4.65 lbs. Medium/Long 10" x 14"
4.65 lbs. Large 10.5" x 13.5"
ARMOR
GENTEX TBH (TACTICAL BALLISTIC HELMET) - GT-2000 NIJ 0106.01 LEVEL 3A
made in the usa
The TBH offers the same advantages as the current MICH Ballistic Helmet:
• A reduced profile resulting in better peripheral and look-up field of vision for improved situational awareness
• Improved stability and comfort utilizing the Airborne certified “X” harness fully adjustable 4 point retention system
• Improved interface with ballistic vests, goggles, communications headsets, gas masks and shoulder fired weapon sights
• Chinstrap and retention can withstand 115 lb tension loading and is designed and approved for parachute operations
• State Department approved for requirements for combat effectiveness
• Provides impact attenuation (velocity of 10FPS not to exceed 150g’s)
• Available in 4 sizes to fit 5th to 99th percentile population range
• Increased ballistic protection with less head borne weight
• Pad style suspension system
Adjustable Sizing Pad Suspension System
Six variable thickness front and rear sizing pads and split-
section crown pads are provided. The split crown pads can be
separated to allow use with an over-the-head style headband
headset. Sizing pads are a combination of 1/4" and 1/2"
temperature insensitive CONFOR® foam that provide adjustable
fitting, decreased hardening in cold weather environment,
impact protection and minimize pressure points. The cover of
the pads can be opened to remove or add foam for maximum
comfort, sizing and stability. The pads are held in place by hook
tape bonded to the shell and can be positioned as necessary.
Gentex Helmet Size
Medium with Sizing Pads (Circumference 21.25” to 23.25”)
Large with Sizing Pads (Circumference 23.25” to 24.33”)
Colors: Black or Olive Drab GENTEX HELMET COVERS
GT-2000 $Call for Price Colors: ACU Digital, Coyote Brown,
Note: Level 3A includes the ballistic threats of 9mm, 124gr. FMJ at 1400 FPS and the 44 Mag, 240gr. SWC Ranger Green, CRYE and Black
at 1400 FPS in accordance to the NIJ 0106.01. The TBH also meets or exceeds the US Military Standard (17
grain FSP) V50 2150 FPS. Sizes: Small, Medium, Large, XL
Call for qty. discounts and Government pricing GOV GT-2000-HC $29.95
BATTLELAB KITS ®
BATTLELAB® KITS
Because of our commitment to offer superior products, Diamondback Tactical™
uses only US-made 1000 denier and 500 denier Cordura® nylon fabric and
webbing to construct our packs, bags and pouches and to cover our armor.
KIT-AF-A-6-0022
$579.95
KIT-AF-A-6-0026
$64.95
opened
made in the usa Call for qty. discounts and Government pricing GOV
BATTLELAB KITS
®
KIT-AF-A-6-0028
$164.95
KIT-AF-A-6-0024
$84.95
KIT-AF-A-6-0027
$164.95
KIT-AF-A-6-0025
$44.95
Call for qty. discounts and Government pricing GOV made in the usa
BATTLELAB KITS
®
KIT-AF-A-6-0029
$194.95
KIT-AF-A-6-0023
$354.95
TACTICAL NYLON
BATTLELAB® DUMP/BREACHING POUCH, DROP LEG
WITH LEVEL IIIA LEG PROTECTION made in the usa
designed with direct input from both operators in the field as well as from our 9mm or 45 cal.
instructors. Based on our Ballistic Leg Platform we have placed our Dump/Breacher Mag Pouches
pouch along with three - 9mm Mag pouches, three - 45 cal. Mag pouches, or two
M4 Open Top Mag pouches secured by a quick draw tab and Detloc®.
BLPF25-9 (9mm)
BLPF25-45 (1911, .45 cal)
BLPF25-M4 (M4/M16)
$164.95
Colors: ACU Digital, Coyote Brown, Ranger Green, CRYE and Black
BLPF21-4 (Holds 4)
$54.95
TACTICAL NYLON
BATTLELAB® I.S.O.U.K.™ Patent No. D562,527
made in the usa
Interceptor Side Opening Upgrade Kit™
The I.S.O.U.K ™ is a revolutionary new kit that allows you to turn your
standard Interceptor OTV front opening carrier into a more
flexible/modular load bearing system. The kit includes a series of “H”
Straps and “T” Straps plus an attachable internal cummerbund that gives
you an almost limitless number of combinations for improving the
effectiveness of your vest. The H-Straps and/or T-Straps close up the front
of your standard OTV carrier to reduce “droop and sag”. Then, utilizing the
T-Straps and/or Internal Cummerbund T-Strap Assembly, you can
completely convert the carrier to a side opening system that will give you
more flexibility in your load carriage and better use of available space.
You will find that your modified carrier will fit better and carry weight
more efficiently with this system because the internal cummerbund
moves much of the load carry to the core of the body and off your
shoulders. In addition, during movement, the flexible cummerbund
allows you unrestricted breathing while still maintaining load.
Kit Includes:
• H-Straps, (qty. 4)
• T-Strap Adapter Kit, (qty 6)
• T-Strap Internal Cummerbund Assembly, (qty. 1)
• Instruction Manual
Extremely Versatile Options:
• Side Opening w/Cummerbund and H-Strap Front Closure
• Side Opening - no Cummerbund w/T-Straps and H-Strap Front Closure
• Front Opening with Cummerbund for more stability and comfort
• Front Opening w/Cummerbund for more stability and comfort and
T-Strap front closure to reduce droop
• Numerous other creative ways that you will find work for you
in the field
Colors Available: Foliage(ACU), Coyote Brown, Camel Tan
and Ranger Green
BL-ISOUK $79.95
Internal Cummerbund
BLPA19
$19.95
Call for qty. discounts and Government pricing GOV A BLPA-BattleLab Belt Accessory
TACTICAL NYLON
BATTLELAB® SSE (ADVANCED) BAGS
The BattleLab SSE Bags in Medium and Large are
designed to give the operator additional dump pouch
space or storage for sensitive items that may be of
importance to an operation or location. The bags are
double layered with draw string closure to give
additional retention to items that are placed in the
bags. Three belt loops give the bag stability and
confidence that you won’t lose any items during
movements. Two closure tabs give you the ability to
role these bags until you need to deploy them. A poly
strip placed near the lid of the bags keeps the bags
open when deployed for easy insertion of items.
Features:
• 3" x 5" Viewable Space
• Two spare 3" x 5" card holders for
pre-planned mission cards
• 7" x 5" Total Size
• Single 123A Battery with easy access lid
• Fricticious™ material towards arm to prevent slippage
• Hook and loop adjustment bands
• Electro-Illuminescent material to backlight information
• Simple push button on/off
• Flap closure protecting information
TACTICAL NYLON
BATTLELAB® WEAPONS CATCH
The BattleLab WC is perfect for saddling your primary weapon in
while handcuffing suspected terrorists or fastroping onto the target.
BLPF35
$20.95 made in the usa Call for qty. discounts and Government pricing GOV
made in the usa Call for qty. discounts and Government pricing GOV made in the usa Call for qty. discounts and Government pricing GOV
TACTICAL NYLON
BATTLELAB® TACTICAL ACCESSORIES KIT BAG
made in the usa
These low profile and collapsible accessory bags will assist you in
keeping all the small items in your kit organized.
Small: approx: 7.5" H x 4.5" W x 2.25" D
Large: approx: 7" H x 8.5" W x 4.5" D
Colors: ACU Digital, Coyote Brown,
Ranger Green, CRYE and Black
BLPA40 (Small) $15.95 A
BLPA40-1 (Large) $19.95 A
Call for qty. discounts and Government pricing GOV A BLPA-BattleLab Belt Accessory
BATTLELAB® CG SLING
made in the usa
The CG Sling is a simple but effective tool in CQB. It has a quick
release single point attachment, giving you the ability to cut your
weapon away if needed. The sling is made of mil spec 1 1/4”
webbing and has a fastex buckle for quick release and adjustment in
length. The CG sling is designed to be used with weapons utilizing
single point attachment plates.
KIT-BLPF36
$39.95
Retention Lanyard
with Non-Locking
Carabiner
BLPF10-KNL $69.95
Retention Lanyard
with Locking
Carabiner
BLPF10-KL $79.95
A BLPA-BattleLab Belt Accessory
Call for qty. discounts and Government pricing GOV made in the usa Call for qty. discounts and Government pricing GOV
BLPA235-1 A
BLPM04-S M
$15.95
BATTLELAB® M4/M16 SINGLE OPEN TOP MAG POUCH BATTLELAB® M4/M16 SINGLE OPEN TOP MAG
POUCH WITH 9MM OR .45 CAL. FRONT MAG POUCH
Colors: ACU Digital,
Coyote Brown, Colors: ACU Digital,
Ranger Green, Coyote Brown, Ranger Green,
CRYE and Black CRYE and Black
BATTLELAB® 10 ROUND PISTOL MAG POUCHES BATTLELAB® SR25 SINGLE MAG OPEN POUCH
WITH DETLOC®, .45CAL.
Holds one SR 25 magazine.
Colors: ACU Digital, Coyote Brown,
Ranger Green, CRYE and Black Colors: ACU Digital,
Coyote Brown,
Single 10 Round Ranger Green,
Mag Pouch CRYE and Black
BLPA01-2 $14.95 A
BLPM09-1 $14.95 M BLPM04-1 M
$16.95
Double 10 Round
Mag Pouch
BLPA02-2 $22.95 A
BLPM09-2 $22.95 M
Single SR25
Mag Pouch
(Holds 2 mags)
BLPM18 M
$19.95
Double SR25
Mag Pouch
(Holds 4 mags)
BLPM18-1 M
$32.95
BLPM11 M
$20.95
BLPA29-2-BW $54.95 A
BLPM29-2 $54.95 M
BLPM29-2 MOLLE M
BLPM515 M
$64.95
BLPM15 M
$39.95
BLPM25 M
$89.95
UTILITY POUCHES
BATTLELAB® LOW PROFILE POUCHES
made in the usa
Same quality as our other utility pouches only in a low
profile version. Available in three sizes:
Large (10" W x 6 ?' H x 2" D)
Medium (81/2" W x 6" H x 2" D)
Small (6" W x 4" H x 2" D)
BLPM44-SM M
$19.95
BLPM44-MD M
$22.95
BLPM44-LG M
$25.95
BLPM40 M BLPM41 M
$22.95 $27.95
BLPM42 M BLPM43 M
$27.95 $37.95
UTILITY POUCHES
BATTLELAB® CROSS BATTLELAB® FOLDING SPADE POUCH
DRAW/DROP LEG ADAPTER made in the usa
Colors: ACU Digital, Coyote Brown,
(Patent Pending) Ranger Green, CRYE and Black
For 6004 or 6280 Holsters
Colors: ACU Digital, BLPM23 M
Coyote Brown, $32.95
Ranger Green,
CRYE and Black
BLPM55-3 M
$19.95
BLPM39 M BLPM22 M
$7.95 $34.95
UTILITY POUCHES
BATTLELAB® ID HOLDER/ ADMIN/FLASHLIGHT POUCH BATTLELAB® ADMIN/FLASHLIGHT POUCH
made in the usa
Colors: ACU Digital, Coyote Brown, Ranger Green, CRYE Colors: ACU Digital, Coyote Brown, Ranger
and Black Green, CRYE and Black
BLPM36-2 M BLPM36-1 M
$24.95 $22.95
UTILITY POUCHES
BATTLELAB® BATON POUCH BATTLELAB® BATON
POUCH, ADJUSTABLE
Colors: ACU Digital, Coyote
Brown, Ranger Green, CRYE (16" or 21")
and Black Colors: ACU Digital,
Coyote Brown, Ranger
(fits 16" Baton) Green, CRYE and Black
BLPA12 A
$10.95 BLPM37 M
$13.95
(fits 21" Baton)
BLPA12-1 A
$11.95
UTILITY POUCHES
BATTLELAB® FLASHBANG/40MM POUCHES
Colors: ACU Digital,
Coyote Brown,
Ranger Green,
CRYE and Black
Single Pouch
BLPM20-1 M
$15.95
Double Pouch
BLPM20-2 M
$25.95
Triple Pouch
BLPM20-3 M
$31.95
Quadruple Pouch
BLPM20-4 M
$38.95
Quintuple Pouch
BLPM20-5 M
$45.95
UTILITY POUCHES
BATTLELAB® 148 AND
152 RADIO POUCHES made in the usa
UTILITY POUCHES
BATTLELAB® 1 QT.
CANTEEN POUCH made in the usa
BLPM50 M
$26.95
BLPM52-1 M
$74.95
UTILITY POUCHES
BATTLELAB® C420 BLOWER POUCH made in the usa
BLPM70-1
$29.95 M
(Patent Pending)
When we created the Cutaway Platforms for our BattleLab line of product offerings, their purpose was for use with
our popular BLPM60 and BLPM62 Medical Pouches and they became an instant success. Resourceful Operators
adapted them to other pouches in addition to the medical pouches. The original two sizes proved to be such useful
pieces of gear that we have added a third, larger size – the BLPM52-PLF.
Although designed to be used primarily with the Hydration Patrol Pack (BLPM52-1) as a cutaway unit, the BLPM52-PLF
can also be adapted for a variety of other purposes using other BLPM series pouches. With the pull of a single wire
on the Cutaway Platform, you’ll have instant access to extra ammo, SAW pouches, hydration or whatever gear is
critical to your mission. In addition it gives you the ability to drop extra weight in emergency situations where you
have to get out of Dodge in a hurry. Colors: ACU Digital, Coyote Brown, Ranger Green, CRYE and Black
The Assaulter Panel includes four flashbang pouches, medium utility pouch
(perfect for medical supplies), large utility pouch (sits on lower back for
personal equipment, MREs, additional equipment, etc.) and Assaulter’s Tool
Holder (for use with collapsible entry/breaching tools).
Colors: ACU Digital, Coyote Brown, Ranger Green, CRYE and Black
BATTLELAB® LV7 –
LOW VIS RACK WITH MOLLE
The LV7 rack incorporates the same
comfort and capability as our standard
racks but with the MOLLE-only
configuration, the operator can
customize it with the pouches and/or
magazines specific to his mission.
BLPF20-2-LV7
$89.95
LV7 -Low Vis Rack with MOLLE
BATTLELAB® LV1 –
LOW VIS RACK WITHOUT MOLLE
The LV1 rack features:
ASP/flashlight pouch, four M4
open top magazine pouches
featuring DetLoc® and secured
with bungee pull tabs, two utility
pouches (small), one utility
pouch (medium), MBTR radio
pouch, two pistol magazine
pouches, adjustable shoulder
and waist straps.
BLPF20-2LV1
$99.95
Colors: ACU Digital, Coyote Brown, Ranger Green, CRYE and Black
BLPF20-2LV2
$99.95
Colors: ACU Digital, Coyote Brown, Ranger Green, CRYE and Black
BLPF20-2LV3
$99.95
made in the usa Call for qty. discounts and Government pricing GOV
BLPF20-2-LV6
$119.95
made in the usa Call for qty. discounts and Government pricing GOV
BLPF08
$69.95
made in the usa Call for qty. discounts and Government pricing GOV
BLPF73-SM (Small)
BLPM73-LG (Large)
$159.95
BATTLELAB® 81 SERIES
SIDE POUCHES made in the usa
BLPF81-SP
$59.95 per set
Backpack not included Call for qty. discounts and Government pricing GOV
BLPF81-F
$259.95
Call for qty. discounts and Government pricing Call for qty. discounts and Government pricing GOV
Key Features:
• Two small internal pockets for
storage of personal items
• Internal bottom straps for attaching
medical or other inserts
• PALS webbing along the inside back
• Internal hydration pouch
(Bottom)
(Inside)
BLPF81-CI $109.95
Call for qty. discounts and Government pricing GOV