PVC water-stop shall be manufactured by extrusion process from
an elastomeric plastic compound, the basic resin of which is polyvinyl chloride. The product shall be dense and homogeneous and free from holes and other imperfections. The PVC water-stop shall be purchased as a commercial product subject to prior approval of the Engineer which shall generally conform to the following: Specific Gravity
1.33 + 0.03 at 23 C
Tensile strength
15 to 17.5 N/mm2 at 23 C or 15 to 17.5 MPa at 23 C
Ultimate elongation
360 to 400% at 23 C
Brittleness temperature
Minus 45.5 C
Field splices for PVC water-stops shall be made by means of the
manufacturer's recommended splicing machine or by any other approved electric heating device.
The Complete HVAC BIBLE for Beginners: The Most Practical & Updated Guide to Heating, Ventilation, and Air Conditioning Systems | Installation, Troubleshooting and Repair | Residential & Commercial