Rev. 4 10/06 DTM Enterprises Technical Training Division Page 1 of 1
281-330-9542 www.DTM-Enterprises.org Class Quiz #19 1. What is the lowest temperature that a 1.5 inch thickness Curve D material can be designed for without impact tests? Class Quiz #20 1. What would be the adjusted MDMT for a vessel 1.5 thick from Curve D with a Coincident Ratio of .90? Class Quiz #21 1. What specification must impact testing procedures conform to? 2. What type of Impact Test does the Code recognize? 3. What are the dimensions of a standard Charpy Impact specimen? 4. How many specimens comprise a single set? 5. How many sets of specimens are required for a weld procedure test coupon 1 3/4 inches thick? 6. When welding a procedure test plate for impact testing what must the P No. and Group No. be? What type of heat treatment must be applied to the test plate? 7. Name the two types of test specimens required for all welding procedures. Hint: Where do they come from?