CONFIGURE (Router) accept-lifetime hh:mm:ss <1-31> MONTH <1993-2035> infinite accept-lifetime hh:mm:ss MONTH <1-31> <1993-2035> infinite no accept-lifetime access-class {<1-199> | name} {in | out} no access-class {<1-199> | name} {in | out} access-list <1-99> {deny | permit} { any | {network wildcard-mask {hostname | ip-address}} no access-list <1-99> access-list {<1-99> | <100-199>} remark text access-list <100-199> {deny | permit} {ip | icmp | } { network wildcard-mask | any | host {hostname | ip-address} { network wildcard-mask | any | host {hostname | ip-address} access-list <100-199> {deny | permit} {tcp | udp} { network wildcard-mask | any | host {hostname | ip-address} [{eq | neq} [port_num | keyword]] { network wildcard-mask| any | host {hostname | ip-address } [{eq | neq} [port_num | keyword]] no access-list <100-199> auto-cost reference-bandwidth value no auto-cost reference-bandwidth value auto-summary no auto-summary bandwidth <1-10000000> no bandwidth boot system {flash | ftp | rcp | rom | tftp} system-filename [ip-address] no boot system {flash | ftp | rcp | rom | tftp} system-filename [ip-address] clock rate <1200-2000000> no clock rate clock timezone zone hours [minutes] config-register <0x0000-0xFFFF> no config-register crypto key generate rsa no crypto key generate rsa default-information originate default-router address no default-router {deny | permit} { any | {ip-address | hostname } | host {ip-address | hostname } } no {deny | permit} { any | {ip-address | hostname } | host {ip-address | hostname } } {deny | permit} {icmp | ip} { network wildcard-mask| any | host {ip-address | hostname} { network wildcard-mask| any | host {ip-address | hostname} Page 2
CONFIGURE (Router) {deny | permit} {tcp | udp} { network wildcard-mask | any | host {ip-address | hostname}} [{eq | neq} port] { network wildcard-mask | any | host {ip-address | hostname}} [{eq | neq} port] no {deny | permit} {icmp | ip | tcp | udp} { network wildcard-mask | any | host {ip-address | hostname}} { network wildcard-mask | any | host {ip-address | hostname}} description LINE no description dns-server address no dns-server domain-name domain no domain-name duplex {auto | full | half} no duplex enable password password no enable password enable secret password no enable secret encapsulation {frame-relay [ietf] | hdlc | ppp} no encapsulation [frame-relay [ietf] | hdlc | ppp] end exit frame-relay interface-dlci dlci-number [ietf] no frame-relay interface-dlci dlci-number [ietf] frame-relay lmi-type {ansi | q933a | cisco} no frame-relay lmi-type {ansi | q933a | cisco} frame-relay map ip ip-address dlci-number {[broadcast] | [ietf | cisco]} no frame-relay map ip ip-address history size <0-256> hostname hostname no hostname interface interface no interface interface ip access-group {<1-199> | name} {in | out} no ip access-group {<1-199> | name} {in | out} ip access-list {standard | extended} name ip address {{ip-address netmask} [secondary] | dhcp} no ip address {{ip-address netmask} [secondary] | dhcp} ip authentication key-chain eigrp asn chain-name no ip authentication key-chain eigrp asn chain-name ip authentication mode eigrp asn md5 no ip authentication mode eigrp asn md5 Page 3
CONFIGURE (Router) ip classless no ip classless ip default-network ip-address no ip default-network ip-address ip dhcp excluded-address low-address [high-address] no ip dhcp excluded-address low-address [high-address] ip dhcp pool name no ip dhcp pool name ip domain-lookup no ip domain-lookup ip domain-name domain-name no ip domain-name ip hello-interval eigrp asn timer-value no ip hello-interval eigrp asn timer-value ip helper-address address ip hold-time eigrp asn timer-value no ip hold-time eigrp asn timer-value ip host hostname ip-address no ip host hostname ip name-server address ip nat {inside | outside} no ip nat {inside | outside} ip nat inside source {list {access-list-number | access-list-name}} {interface interface | pool pool- name} [overload] no ip nat inside source {list {access-list-number | access-list-name}} {interface interface | pool pool-name} [overload] ip nat inside source static source-local-ip-address inside-global-ip-address no ip nat inside source static source-local-ip-address inside-global-ip-address ip nat pool pool-name start-ip end-ip {netmask netmask | prefix-length prefix-length} no ip nat pool pool-name start-ip end-ip {netmask netmask | prefix-length prefix-length} no ip nat pool pool-name ip ospf authentication [message-digest | null] no ip ospf authentication ip ospf authentication-key key-value no ip ospf authentication-key key-value ip ospf cost interface-cost no ip ospf cost ip ospf dead-interval interval-number no ip ospf dead-interval ip ospf hello-interval interval-number Page 4
CONFIGURE (Router) no ip ospf hello-interval ip ospf message-digest-key key md5 key-value no ip ospf message-digest-key key md5 key-value ip ospf priority [0 - 255] no ip ospf priority ip route network network-mask {next-hop| next-hop-interface} [distance] [permanent] no ip route network network-mask [next-hop] [distance] [permanent] ip subnet-zero no ip subnet-zero ip summary-address eigrp as-number ipv4-prefix ipv4-mask ipv6 enable no ipv6 enable ipv6 ospf cost cost no ipv6 ospf cost ipv6 ospf dead-interval seconds no ipv6 ospf dead-interval ipv6 ospf hello-interval seconds no ipv6 ospf hello-interval ipv6 ospf priority priority no ipv6 ospf priority ipv6 address {ipv6-link-local-address link-local | ipv6-prefix/prefix-length [eui-64] | autoconfig} no ipv6 address {ipv6-link-local-address link-local | ipv6-prefix/prefix-length [eui-64] | autoconfig} ipv6 host hostname ipv6-address1 [ipv6-address2...ipv6-address4] no ipv6 host hostname ipv6-address1 [ipv6-address2...ipv6-address4] ipv6 rip name enable no ipv6 rip name enable ipv6 route destination-prefix/prefix-length {next-hop-address|next-hop-interface next-hop-link- local-address} [distance] no ipv6 route destination-prefix/prefix-length {next-hop-address|next-hop-interface next- hop-link-local-address} [distance] ipv6 router rip name no ipv6 router rip name ipv6 router ospf process-id no ipv6 router ospf process-id ipv6 unicast-routing no ipv6 unicast-routing keepalive <0-32767> no keepalive key <0-2147483647> Page 5
CONFIGURE (Router) no key <0-2147483647> key chain name no key chain name key-string keystring no key-string lease {days [hours [minutes]]} no lease line console <0-0> line vty <0-4> login [local] no login [local] maximum-paths <1-16> no maximum-paths <1-16> network network-number {netmask | prefix-length} [secondary] no network network-number {netmask | prefix-length} [secondary] network network wildcard-mask area <0-4294967295> no network network wildcard-mask area <0-4294967295> network network [wildcard-mask] no network network [wildcard-mask] passive-interface {default | interface-type interface-number} no passive-interface {default | interface-type interface-number} password password no password ppp authentication chap no ppp authentication ntp master ntp peer {ip-address | ipv6-address} ntp server {ip-address | ipv6-address} remark text router eigrp autonomous-system no router eigrp autonomous-system router-id rid router-id router-id no router-id router-id router ospf process id no router ospf process-id router rip no router rip router-id router-id send-lifetime hh:mm:ss <1-31> MONTH <1993-2035> infinite Page 6
CONFIGURE (Router) send-lifetime hh:mm:ss MONTH <1-31> <1993-2035> infinite no send-lifetime no service timestamps shutdown no shutdown speed {auto | speed} no speed transport input {ssh | telnet} [ssh | telnet] no transport input username username password password no username username variance <1-128> no variance version <1-2> no version <1-2>
EXEC (Router) clear ip dhcp [pool name] binding {* | ip-address} clear ip dhcp conflict {* | ip-address} clock set hh:mm:ss date month year configure configure terminal copy running-config startup-config copy startup-config running-config copy tftp flash debug frame-relay lmi no debug frame-relay lmi debug ip rip no debug ip rip debug ppp authentication no debug ppp authentication no debug all disable disconnect [WORD] enable erase startup-config exit ping { ip-address | hostname } reload Page 7
EXEC (Router) resume [session-number] setup ssh -l username {ip-address | hostname} telnet {ip-address | hostname} terminal history size <0-256> terminal ip netmask-format bitcount terminal ip netmask-format decimal terminal ip netmask-format hexadecimal terminal monitor terminal no monitor traceroute {ip-address | hostname} undebug all write erase
SHOW (Router) show access-lists [access-list-number | access-list-name] show arp show cdp show cdp entry entry-name show cdp interface show cdp neighbors show cdp neighbors detail show cdp neighbors interface show cdp traffic show clock show controllers [serial 0/0/0] show flash show frame-relay lmi [interface interface] show frame-relay map show frame-relay pvc [interface interface][dlci] show history show hosts show interfaces interface show interfaces [interface] [description] show interfaces description show ip access-list show ip access-lists [access-list-number | access-list-name] show ip arp show ip dhcp binding Page 8
SHOW (Router) show ip dhcp binding [ip-address] show ip dhcp conflict show ip dhcp pool show ip dns view show ip interface show ip interface <interface> show ip interface [interface] show ip interface brief show ip nat statistics show ip nat translations show ip ospf show ip ospf database show ip ospf interface brief show ip ospf neighbor [neighbor-RID] show ip protocols show ip route show ip route [rip | static | connected | eigrp | ospf] show ip route network [netmask] show ip route ospf [process-id] show ipv6 interface show ipv6 interface [interface] show ipv6 interface brief show ipv6 neighbors show ipv6 neighbors [interface-type interface-number | ipv6-address | ipv6-hostname] show ipv6 route {ipv6-hostname | ipv6-address | ipv6-prefix} show ipv6 route {[prefix/prefix-length] | [ipv6-address]} show ipv6 route [static | connected | eigrp | ospf] show ipv6 ospf [process-id] [area-id] show ipv6 ospf [process-id] [area-id] database show ipv6 ospf [process-id] [area-id] interface[interface-type interface-number] [brief] show ipv6 ospf [process-id] [area-id] neighbor show ipv6 ospf [process-id] [area-id] neighbor neighbor-RID show ipv6 protocols show ntp associations show ntp status show process show running-config show sessions show startup-config show users Page 9
SHOW (Router) show version show vlans Page 10
SWITCH COMMANDS (Configure, Exec, Show)
CONFIGURE (Switch) bandwidth <1-10000000> no bandwidth cdp enable no cdp enable cdp run no cdp run channel-group <1-6> mode on no channel-group <1-6> mode on login no login login local no login local name vlan-name no name vlan-name password password no password shutdown no shutdown spanning-tree [vlan vlan-number] cost <cost> no spanning-tree [vlan vlan-number] cost <cost> spanning-tree vlan vlan-number root {primary | secondary} spanning-tree portfast no spanning-tree portfast spanning-tree vlan vlan-id no spanning-tree vlan vlan-id spanning-tree vlan vlan-id priority priority no spanning-tree vlan vlan-id priority priority speed {10 | 100 | 1000 | auto} no speed switchport access vlan vlan-id no switchport access vlan switchport mode {access | trunk | dynamic {auto | desirable}} no switchport mode switchport nonegotiate no switchport nonegotiate switchport port-security no switchport port-security Page 11
CONFIGURE (Switch) switchport port-security mac-address mac-address no switchport port-security mac-address mac-address switchport port-security mac-address sticky no switchport port-security mac-address sticky switchport port-security maximum <1-8192> switchport port-security violation {protect | restrict | shutdown} switchport trunk allowed vlan {all | add | except | remove} vlan-ids no switchport trunk allowed vlan switchport voice vlan vlan-id no switchport voice vlan transport input {telnet |ssh} [telnet |ssh] no transport input username username password password no username username vlan vlan-id no vlan vlan-id vtp domain domain-name vtp mode {off | server | client | transparent} no vtp mode [off | server | client | transparent] vtp password password no vtp password vtp pruning no vtp pruning
SHOW (Switch) show dtp interface show ip arp show ip default-gateway show ipv6 neighbors show ipv6 neighbors [interface-type interface-number | ipv6-address | ipv6-hostname] show ipv6 route [static | connected | eigrp | ospf] show ipv6 route {ipv6-hostname | ipv6-address | ipv6-prefix} show mac address-table [static | dynamic] [address mac-address | interface interface | vlan vlan-id] [address mac-address | interface interface | vlan vlan-id] [address mac-address | interface interface | vlan vlan-id] show port-security [address | interface interface] show running-config show sessions show spanning-tree show spanning-tree interface portfast show spanning-tree [vlan vlan-id] bridge show spanning-tree vlan vlan-id show startup-config show users show version show vlan show vlan brief show vlan id vlan-id show vlan name vlan-name show vlan summary show vtp status
PC COMMANDS CONFIGURE (PC) gateway ip-address ip address ip-address netmask ipconfig /release ipconfig /renew ipv6 address autoconfig Page 13