Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
D5
PARTS & SERVICE NEWS
REF NO.
DATE
AH07513b
March 19, 2014
Page 1 of 13
AH07513b
SUBJECT: Installation Hints for Cables and Hoses
PURPOSE: Pay Special Attention to Cable and Hose Installation /
(pages 2 and 13 Supplemented)
APPLICATION: All types
FAILURE CODE: D500FA
DESCRIPTION:
To avoid damage, please pay attention to the installation
principles on the next pages during your dail y visual
inspections.
Attached you will find good and bad examples.
1. Hints for installation of cables Page 2
2. Hints for installation of hydraulic hoses Page 3
3. Bad and good examples for installation Pages 4 to 12
(C)
Page 2 of 13
AH07513b
Cable must be protected at the
end of a cable channel.
Passage - cables protected.
Corner enough space for the
cable.
Clamp with rubber!
Onl y PC 3000-6:
Cable must be fixed to cable
channel with fabric band.
Cable must be above hose.
Cable and hose must be
clamped separately.
Interval of clamps must be
shorter than 500 mm
Shorten the shield of bus
cable not more than 40 mm!
X
X
X
X
X
X
Page 3 of 13
AH07513b
Pay attention to the Natural
curvature of hose!
Do not twist the hose during
installation!
Mount 90 (bent) fitti ngs first!
Pay attention to the change of
length, dependant on the
pressure.
Pay attention to the bending
radius.
Pay attention to the bending
radius.
X
1
st
2
nd
X
X
X
X
Page 4 of 13
AH07513b
Page 5 of 13
AH07513b
Use temperature resistant
insulating tape.
Page 6 of 13
AH07513b
Page 7 of 13
AH07513b
Page 8 of 13
AH07513b
Page 9 of 13
AH07513b
Page 10 of 13
AH07513b
Page 11 of 13
AH07513b
Page 12 of 13
AH07513b
Page 13 of 13
AH07513b
Bad example! O.K.
Ingress of moisture is possible. Cable lead-in from below or at the side
Shield of the bus cable is too short Cut off the shield as little as possible