Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Hardware setup:
Software setup:
Switching to DeviceNet mode to create the EDS file and choosing the extension module of CME-DN01 as well
Choosing VFD-EL as the device of EDS file and selecting the right COM port, then let the software takes care of
the remaining connection
Pressing the button of Auto test and you will see whether the connection is fail or not at the below window
Pressing the button of load, then the EDS file has been creating through the process.
The left side widow will be showing the content of EDS file