Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Title: By:
VISTA-SPC-PI-0010
Date:
2012-11-22
Rev. No.:
DL/TS
Approved
AP
Service:
Sour Hydrocarbons Emulsion Code: CSA Z662-2011 Flange Rating: PN50 (ASME 300#) Max. Press: NDE: ITEM Pipe 4266 kPag @ 230C VT, RT 100% SIZE -1 2 3 4 6 - 1 2"-6
DESCRIPTION ASTM A106-B, Sour service, Seamless, PE, Sch.160 CSA Z245.1, Grade 359, CAT. II Sour Service, Seamless, BE, Wall thickness 5.50 mm minimum Same as 2, but Wall Thickness 5.50 mm minimum 6.00 mm minimum 7.00 mm minimum ASTM A105, 6000#, SW, Sour Service CSA Z245.11, CAT. II Sour Service Grade 359, BW, Wall Thickness same as pipe
NOTES
1, 2 1, 2 1, 2 1, 2 1 1
Fittings
Flanges
- 1 2-6
PN 50, A105, RFSW- Sour Service PN 50, CSA Z245.12, CAT. II Sour Service RFWN, Grade 359, Bore to match pipe.
1 1 1 1 1 1 1
1/2 - 1-1/2" A105N, NPT, Hexagonal Head 1/2 - 1-1/2" 2-6 ALL A106-B, Sch.160, SMLS, PE or PE/TE ASME 300#, RF, A516 Gr. 70N, per ASME B16.48
316 spiral wound flexible graphite filler, SS outer ring, SS inner ring (No Asbestos), 300#, 3.2 mm Thick, Flexitallic or Equivalent Stud bolt, full thread, ASTM A193-B7M, hex nuts, ASTM A1942HM (refer to ASME B16.5 for bolt lengths) 1/2 - 1-1/2 A105N (NACE) SW, 6000#, MSS-SP-97 (Bonney Forge or Equivalent) 2-6 A105N, (NACE), BW, Sch. XS, MSS-SP-97 (Bonney Forge or Equivalent) Class 800, SW/ SWxTE Gate Valve, Trim 12, A105N, OS&Y, NACE GA-802C/ GA-803C PN 50, RF Flanges Gate Valve, Trim 12, A216 Gr. WCB, OS&Y, NACE, Manufacture to CSA Z245.15 GA-303C
Gate Valves
1/2"-1-1/2" 2-6
VISTA-SPC-PI-0010
Date:
2012-11-22
Rev. No.:
DL/TS
Approved
AP
Service:
Sour Hydrocarbons Emulsion Code: CSA Z662-2011 Flange Rating: PN50 (ASME 300#) Max. Press: NDE: ITEM 4266 kPag @ 230C VT, RT 100% SIZE
DESCRIPTION
NOTES
Check Valves
2-6 2-6
Ball Valves
PN 50, RF Flanges, Swing Check Valve, Trim 12, A216-Gr. WCB, NACE, Manufacture to CSA Z245.15 CH-305C PN 50, RF Flanges, RP, PEEK Seated Ball Valve, Floating Type, A216 Gr. WCB, Fire Tested to API-607, Manufacture to CSA Z245.15, NACE BA-304C
NOTES: 1. All material used must meet the requirements of Z662-2011 for sour service and NACE MR0175/ISO 15156, latest edition. 2. In the event that the specified nominal wall thickness is not available, the next commercially available thickness shall be used.
VISTA-SPC-PI-0010
Date:
2012-11-22
Rev. No.:
DL/TS
Approved
AP
Service:
Sour Hydrocarbons Emulsion Code: CSA Z662-2011 Flange Rating: PN50 (ASME 300#) Max. Press: NDE: ITEM 4266 kPag @ 230C VT, RT 100% SIZE
DESCRIPTION
NOTES
Branch Table:
REV. 0
DATE 2012-11-22
BY FV
CHECKED DL/TS
APPROVED AP