Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Continous dyeing 1
PRESTON UNIVERSITY
MILL REPORT
Submitted By:
NAME Registration No
In line with recent trends toward high-quality production and diversification in the textile
processing , much efforts is being exerted to improve the performance of mixed fabrics of
natural and synthetic fibres and to introduce the new product with new values.
This technical information presents a detailed description of the standard working procedure
adopted under normal practice for continous dyeing of polyester/cellulosic blended fabrics,a
and series of important suggestions over the selection of dye sftuff.
As continous dyeing polyester /cellulosic blended fabrics involves a large variety of fibre
substrates, processing methods and recommendable dye stuffs, in this information two
possible dye stuffs are described—one is disperse vat combination and second is disperse
reactive combination .
Acknowledgment
All thanks are due to Almighty “ALLAH” most beneficial and merciful who enable us to
complete this project.
The completion of this project is perceived as the fruitful result of and incredible effort,
devotion and hardwork. It can be stated without any hesitation that this subject is the
outcome of the joint effort of all concerned by successfully negotiating the various tedious
problems and hurdles.
We are particularly thankful of S.M Qutab ,our project advisor for the guidance and
valuable cooperation render by him at any stage regarding this project. He full indulged
himself to facilitate our job whenever approached him to seek guidance regarding this
study.
Finally we acknowledge a debt of gratitude to our parents and other encouragement, who led
us to complete this project work.
Authors
Continous dyeing 2
Continous dyeing 3
COTTON
Cotton is a natural fibre. It has cellulose as its major constituent.
COTTON IN PAKISTAN: -
Cotton is cultivating in Pakistan on 40 to 50 lack acres
and gives about 30 to 40 million bales of cotton per year. Since, cotton is cultivated
under different conditions, and its quality various from area to area, field to field,
variety to variety, plant to plant, ball to ball. Butt in industries we want cotton of
uniform quality and also fixing of price depended on quality of cotton.
PROPERTIES OF COTTON
o Cotton consist of pure cellulose (C6H10O5)n
o Cotton fibres have a flat, twisted and ribbon like appearance.
o It absorbs water and does not dry quickly. (SMR = 8.5%)
o It is not damage by alkali
o It is damaged by acids.
o Cotton may be dyed with variety of dyes.
o It is highly flammable fibre.
Cotton crop is ready in July. It is cut and come into ginning mills. In Pakistan, over
1200 ginning factories are working that are producing 10 million bales of cotton.
Standard weight of cotton bale is 170 kg / bale. These bales used in spinning mills to
produce the yarn. Every year almost 137050 ton cotton is consumed bales of raw
cotton are come into spinning unit & after long process this raw cotton is converted
into the yarn.
Large scale spinning mills = 503
Yarn is converted into fabric in weaving mills.
In Pakistan, 16800 organized weaving mills are working
Continous dyeing 4
Production of cloth
Greige Department
INTRODUCTION:
Greige fabric that buys from different weaving units comes in
this department. In this department inspection of fabric is done. Accepted fabric is
send to next department. There are two inspection systems that are mostly used, one
in 10 point American system and other is 4 points Japanese system is used.
I- Inspection / Grading
II- Lot making
III- Mending
I-Inspection / Grading: -
The main purpose of the inspection is to check the Greige fabric for identify the
faults.
Weaving Faults: -
Double Ends, Loose Ends, Broken Ends, Wrong Dent/Draw,
Loose Selvedge, Double Pick, Miss Pick, Design Cut, Knots,
Hanging Threads, Float,
Mechanical Faults: -
Starting Marks, Rapping Marks, Mending Marks, Hole /Cuts, Oil
Stain
Yarn Faults: -
Cockled Yarn, Weft Slub, Slubby Weft, CEP, Count Variation,
Hair, Jute, P Proplyene, Black Ends.
Others: -
Oily Weft, Sizing Stain, Hard Size.
Minor Faults: -
The faults can be removed easily in further processing such as in
scouring, bleaching and mercerizing etc.
Continous dyeing 6
Major Faults: -
Those faults that can not be removed in further processing are major
faults such as starting mark, rapping mark, whole etc.
II-LOT MAKING: -
Lot making is the process which is done before Pretreatment.
Lot making is done for easy handling, transportation and dyeing facilities.
Considerations for the lot making are: -
1. Fibre types
2. Constructions
3. Greige width
Continous dyeing 7
4. Greige lot
5. Convenience of processing and transportations.
6. Source
7. Customer needs
This process is done after see the greige fabric from weaving (lots) then applies the
above factors. Normally 2100 meter fabric easily handling. When fabric come from
weaving then one number is write on the fabric by weavers in order to different
looms, different firm yarns etc. but in the dyeing factories. They had done lot making
under 7 factors.
III-MENDING: -
The correction of the mendable class is called mending. It is also called
repairing of faults. Mending is done by physically and chemically.
I-PHYSICALLY MENDING: -
In the physical mending these faults are removed broken
ends, broken picks, knots, contaminations.
Ii-CHEMICALLY MENDING: -
In the chemical mending these faults are removed stains,
oils, waxes, rust, soils, sighting colours.
TYPES OF OIL AND STAINS
Water Soluble Inorganic salts, urea, sugar
Pigments Carbon Black, Silicates, and Metal oxides.
Fats and Oils Animals, Vegetables and minerals
Proteins Blood, milk
Bleachable dyes Fruits, vegetables etc.
STITCHING SECTION
In stitching section we stitch the no of small lots to make a lot of
required.
Continous dyeing 8
After keeping fabric in a trolley a separate job card is allotted to a single trolley.
There are following information mentioned on a job card e.g. date, contract, customer,
Continous
Continous dyeing 9
constructions, shade, process department, grey Lot #, fabric type, proc Lt #, quality,
fabric source, sub-batch #, sub-batch # Qty, grey width, M/c code, date, shift, start,
End, Meters, trolley No, signature operator and comments.
First of all write starting process Date, 01-08-2005, marketing persons allots separate
Contract No # NDF/OG.3688. There are many lots may be in a single contract,
Customer Name, Mian Textile Ltd etc. Construction, 20.16 / 118.63 etc. Shade,
what is a shade required black, blue, navy blue. Process Departments Bleaching,
Mercerizing. Grey Lt #, the persons of grey store allot separate No# 16067 etc.
IMPORTANCE OF SINGING: -
Singing helps us to minimize or reduce the pilling
effect. Pilling give harsh or bed look to fabric. It
must remove from fabric to get good quality
DESIZING: -
Starch remove from the fabric is called desizing. Desizing is reverse of
sizing and is also called steeping. Its main objective is to degrade size
into soluble product so that after washing sizes remove from fabric and
ready for subsequent process.
BRUSH SINGING
The fabrics pass through Electromagnetic and Nomatic rollers, in
Nomatic rollers air pressure and in electromagnetic rollers electricity
these rollers control the width of the fabric the brushing rollers are
moving by motor. Now the fabric pass through six brushing rollers
three are move in clockwise direction and three are move in anti
clockwise direction below brushing portion of machine present Dust
Collector which is collecting the dust . Now the fabric pass through the
Draw Rollers, these rollers are plastic coated the function of this rollers
give grip to the fabric so that the fabric do not slip and full the fabric.
Draw Rollers are also moved by motor. The fabric come on a guide
roller then fabric pass through the Dancer roller, the function of the
dancer roller keep tight the fabric should be come tight next part of
machine
Continous dyeing 11
GAS SINGING
In gas singing cloth is passed over gas flames. Now the fabric come in
gas singing portion, there are seven rollers in gas singing portion which
have cold water inner portion so that the fabric do not burn. In this
portion of machine there are four burners which are removing the fuzz,
four gas burners are used and are arranged so that first the face and then
back side of the cloth singed in a single passage, above this machine
Dust collector which is collecting the dust. Four rollers are driven by the
four motors. Flame length can be controlled by proper setting of air
pressure and its width should be adjusted according to the width of the
fabric. Back side of gas singing machine pipes are present yellow pipes
are giving gas to burners and white pipes are giving air to burners.
COMMON FAULTS: -
Uneven singing effect
• Across the width
• Across the length
These effects appear in the form of horizontal and vertical strips. These faults of
singing detect the dyeing and these faults are unremovable.
NOTE: -
A suitable guiding principle for singing is the shouter flame fabric contact.
KYOTO GAS SINGING MACHINE: -
The speed of machine is 120meter/minute.
The total capacity of machine is 82meter fabric. Machine 120000 – 135000 meter
fabric singed and desized in 24 hours.
In continuous process the machine used for singing and desizing.
In this machine singing and desizing is done same time after one another.
Continous dyeing 12
ENTERENCE : -
From trolley the fabric enter in the machine by the help of tension roller.
There are four pair of cloth guider in this section which help to
minimize the crease.
BRUSHING ROLLERS: -
There are six brushing rollers in brushing
portion of machine. Three are move clock wise direction and three are
move anti clock wise direction. The main purpose of these brushing
rollers is to remove fluff from fabric surface. It contains suction pump
that sucks fluff and with the help of showers fluff is removed from
suction pomp.
Continous dyeing 13
DUST COLLECTORS: -
There are two dust collectors in machine,
which are collect dust from machine. First dust collector present below
brushing portion of machine and second is present above gas singing
portion of machine.
DRAW ROLLERS:-
These rollers are plastic coated. These rollers
provide grip to the fabric so that fabric do not slip, pull the fabric.
DANCER ROLLERS: -
The function of these rollers keeps tight to the
fabric. There are three dancer rollers are present in machine. 1st dancer
roller is present between brushing and gas singing portion of machine
above draw rollers. 2nd dancer roller is present between two saturator
along above padder. 3rd is present along above solution tank.
GAS BURNERS: -
There are four gas burner are present in machine. In
these burners gas and air is present. Yellow pipes back side of gas
singing machine are providing gas to the burners and white pipes are
providing air. Regulator distributes the air. With the help of two drawers
and one dancer, the fabric from brushing section enter into singing
section. it contains four burners. Water flow through the burners so that
fabric remain safe from burning. The maximum temperature of the
burner is 750Co and the pressure of the gas is 4.1 – 40-.7 kpa, while air
is 6.1 – 6.9 kpa. Blue flame is touched with surface of the fabric.
Burners are controlled by control panel. The flame touch with fabric at
Continous dyeing 14
ROTARY FILTER: -
Rotary filter is present along with first saturator.
Saturators are connected with each other by pipes for solution way.
Rotary filter take solution from saturator and filter it, dirty solution is
drained and clean solution is supplied to the saturator. Small motor
revolve the rotary filter.
SAURATORS: -
There are two saturators are present in machine.
Saturator has seven guide rollers are up an eight are down. Saturator
solution capacity 1250 liter, temperature of saturator 75Co fabric
capacity of saturator is 17 – 20 meters, desizing is done with the help of
the enzyme desizing which is applicable at 7 PH.
EXPENDERS: -
There are three expenders are present in machine. The
shape of expender is like banana. The function of expender, expend the
width of the fabric. 1st expender is present between two saturator and 2nd
is present after second saturator and 3rd is present along winding roller.
PADDERS: -
The functions of Padders squeeze the extra desizing
solution from fabric. There are two Padders in machine. 1st is present
between two saturator. 2nd saturator is present after second saturator.
The weight is 1 ton.
WINDING ROLLER: -
Winding roller is present in the last of machine.
This is winding the fabric on batcher. The quantity of the fabric on one
Continous dyeing 15
DESIZING
It is a process in which we remove starch from the fabric in order to get good
dyeing results. Following types of desizing are carried out,
Rot steeping
Acid steeping
Enzyme desizing
Commonly used desizing is enzymatic /bio desizing.
History of enzymes
The history of modern enzyme technology really began in 1874 when the Danish chemist
Christian Hansen produced the first specimen of rennet by extracting dried calves' stomachs
with saline solution. Apparently this was the first enzyme preparation of relatively high
purity used for industrial purposes.
This significant event had been preceded by a lengthy evolution. Enzymes have been used by
man throughout the ages, either in the form of vegetables rich in enzymes, or in the form of
microorganisms used for a variety of purposes, for instance in brewing processes, in baking,
and in the production of alcohol. It is generally known that enzymes were already used in the
production of cheese since old times.
Even though the action of enzymes has been recognised and enzymes have been used
throughout history, it was quite recently that their importance were realised. Enzymatic
processes, particularly fermentation, were the focus of numerous studies in the 19th century
and many valuable discoveries in this field were made. A particularly important experiment
was the isolation of the enzyme complex from malt by Payen and Persoz in 1833. This
extract, like malt itself, converts gelatinised starch into sugars, primarily into maltose, and
was termed 'diastase'.
greatest importance. The dispute between Liebig and Pasteur concerning the fermentation
process caused much heated debate. Liebig claimed that fermentation resulted from chemical
process and that yeast was a nonviable substance continuously in the process of breaking
down. Pasteur, on the other hand, argued that fermentation did not occur unless viable
organisms were present.
The dispute was finally settled in 1897, after the death of both adversaries, when the Buchner
brothers demonstrated that cell free yeast extract could convert glucose into ethanol and
carbon dioxide just like viable yeast cells. In other words, the conversion was not ascribable
to yeast cells as such, but to their nonviable enzymes.
In 1876, William Kuhne proposed that the name 'enzyme' be used as the new term to denote
phenomena previously known as 'unorganised ferments', that is, ferments isolated from the
viable organisms in which they were formed. The word itself means 'in yeast' and is derived
from the Greek 'en' meaning 'in', and 'zyme' meaning 'yeast' or 'leaven'.
During the early part of this century, enzyme technology was also developing slowly but
surely outside Europe. In the Far East, an age-old tradition prevailed where mould fungi, the
so-called koji, were (and still are) used in the production of certain foodstuffs and flavour
additives based on soya protein (shoyu, miso, tempeh) and fermented beverages (sake,
alcohol). Koji is prepared from steamed rice into which a mixture of mould fungi is
inoculated, the composition of the mixture being passed down from generation to generation.
This formed the basis which the Japanese scientist Takamine developed a fermentation
process for the industrial production of fungal amylase; the process included the culture of
Aspergillus oryzae on moist rice or wheat bran. The product was called 'Takadiastase' and it
is still used as a digestive aid. The method of fermentation suggested by Takamine, the
'surface culture' or 'semisolid culture’ is still actively used in the production of various
enzymes.
Textile Desizing
At about the same time as Takamine was developing his novel fermentation technique,
another field was being opened up for the use of enzymes - the desizing of textiles.
Previously, textiles were treated with acid, alkali or oxidising agents, or soaked in water for
several days so that naturally occurring microorganisms could break down the starch.
However, both of these methods were difficult to control and sometimes damaged or
discoloured the material. It represented great progress, therefore, when crude enzyme extracts
in the form of malt extract, or later, in the form of pancreas extract, were first used to carry
out desizing.
Bacterial amylase derived from Bacillus subtilis was used for desizing, the first time by
Boidin and Effront as early as 1917.
Continous dyeing 17
Leather Bating
Investigations carried out by the German chemist and industrial magnate Otto Rohm before
World War I were of great importance for the further development of the industrial use of
enzymes. Among other things, he studied the so called 'bating' process, a step in the
preparation of hides and skins prior to tanning.
According to tradition, bating required the excrement of dogs and pigeons, a fact that did not
improve the image of tanning which was considered a stinking and unpleasant activity.
Rohm's theory was that these excrements exerted their effect because they contained residual
amounts of the animals' digestive enzymes. If this was so, it might be possible to use extracts
of the pancreas directly for bating. Such extracts were tried and produced the expected
positive results. Naturally, Rohm accepted this as confirmation of the correctness of his
theory, but later experiments showed that it was not the animals' enzymes that were active,
but rather enzymes of bacteria growing in the intestinal tract.
Parallel to his studies of the problems involved in tanning, Rohm investigated other processes
where enzymes would prove even more valuable. Nevertheless, his efforts were not to score
a success until 50 years later. Rohm actually developed the first method for washing protein
stained cloth in detergents containing enzymes and manufactured the first detergent
preparation containing enzymes.
The enzyme preparation used was pancreatin (extracted from pancreatic glands), which
contains the protein degrading enzyme trypsin.
Breakthrough in detergents was made in 1959, when a Swiss chemist Dr. Jaag, developed a
new product called Bio 40 containing a bacterial protease instead of trypsin.
A very important field in which enzymes have proved to be of great value over the last 15-20
years is the starch industry. In 1950s, fungal amylase was used in the manufacture of specific
types of syrup, i.e., those containing a range of sugars, which could not be produced by
conventional acid hydrolysis. The real turning point was reached early in the 1960s when an
enzyme glucoamylase, was launched for the first time, which could completely break down
starch into glucose. Within a few years, almost all glucose production was reorganised and
enzyme hydrolysis was used instead of acid hydrolysis because of the more benefits such as
greater yield, higher degree of purity and easier crystallisation.
The process was further improved by the introduction of a new technique used for the
enzymatic pre-treatment (liquefaction) of starch by using a heat-stable alpha amylase.
enzymes or increase their yields. New techniques for purification of enzymes are constantly
developing and so are being discovered new application of enzymes in medicine, research
and industries
The starting point for enzyme production is a vial of a selected strain of microorganisms.
They will be nurtured and fed until they multiply many thousand times. Then the desired
end-product is recovered from the fermentation broth and sold as a standardised product.
A single bacteria or fungus is able to produce only a very small portion of the enzyme, but
billions microorganisms, however, can produce large amounts of enzyme. The process of
multiplying microorganisms by millions is called fermentation. Fermentation to produce
industrial enzymes starts with a vial of dried or frozen microorganisms called a production
strain.
The production strain is first cultivated in a small flask containing nutrients. The flask is
placed in an incubator, which provides the optimal temperature for the microorganism cells
to germinate. Once the flask is ready, the cells are transferred to a seed fermenter, which is a
large tank containing previously sterilised raw materials and water known as the medium.
Seed fermentation allows the cells to reproduce and adapt to the environment and nutrients
that will be encountered later on.
After the seed fermentation, the cells are transferred to a larger tank, the main fermenter,
where fermentation time, temperature, pH and air are controlled to optimise growth. When
this fermentation is complete, the mixture of cells, nutrients and enzymes, called the broth, is
ready for filtration and purification.
After this the enzymes are formulated and standardised in form of powder, liquid or granules.
Continous dyeing 19
There are two saturators from which desized the fabric. Now the fabric
comes in 1st saturator there are seven guide rollers are up and there are
eight guide rollers are below. First saturator have three, motors 2nd 4th
6th rollers are driven by three motors, at the top of 1st saturator
exhauster present which exhaust the heat. After this the fabric passes
through the Padder which are squeeze the extra desizing solution from
fabric then fabric pass through the Dancer roller. Now fabric comes in
2nd saturator, 2nd saturator similar to first saturator. These saturators are
connected by pipe. Desizing is done with the help of the Enzyme
Desizing which is application at 7 PH
Advantage of singing come desizing
• Short process
• Cheap process
• High production
• Less labor cost
• More impurities are removed
RECIPE: -
For heavy quality of cotton
L100 (Enzyme desizer) 14gm/l
KD (Detergent) =
6gm/l
SE (sequesting agent) = 4gm/l
NaCl = 5gm/l
For heavy quality of cotton
L100 (Enzyme desizer) 10gm/l
KD (Detergent) =
5gm/l
SE (sequesting agent) = 4gm/l
NaCl = 5gm/l
Note:
After desizing the fabric batcher is kept for 6-8 hours in rotation to keep the desizer
within the fabric. It is so because bacterias produced by enzymes take some time to eat
starch. If we will keep it for longer time than a limit then bacterias will start eating fabric
after finishing the starch, and if it will keep for a shorter time then starch could not be eat
completely by the baterias. The PH is maintained from 7-8 and the RPM is usually keep 100.
Continous dyeing 21
SCOURING
Scouring is a process of removing natural as well as synthetic impurities. In this
process maximum cleaning c effect is produced with minimum effect on cellulose
natural fibres contains oils, fats, waxes, minerals, leafy matters and notes as impurities
that interfere with dyeing and finishing. Synthetic fibres contain producer “spin
finishes” coning oils and knitting oils. Mill grease uses to lubricate processing
equipment shift on the processing fabric and contaminate it. “The process of
removing these impurities is called scouring” even through these impurities are not
soluble in water and can be removed by extraction, dissolving.
The impurities in inorganic solvent, emulsification, forming stable suspension of the
impurities in water and sponification converting contaminates into water soluble
compounds.
FATS: -
Chemistry fats and waxes are esters of fatty acids: fats also known as
triglyceride, are abundantly produces by natural s vegetable oils (corn, olive, coconut,
linseed and soy bean oil) and as fatty deposit in animal ( mutton, pork and fish
another source of waxes is vegetable matter, predominantly the hard shing outer
coated tropic leaves.
TRIGLYCERIDE: -
Regardless of weather it is of vegetable or animal origins, a fat can
be either liquid or semi solid. A major factor in determining the physical nature of the
fat in the make up of fatty acid compounds.
Continous dyeing 22
FATTY ACIDS: -
Fatty acids are long chain alkyl – carboxylic acid. The alkyl radical
can be either completely saturated (saturated fatty acid) or (UN saturated fatty acid)
most common chain length in nature is C18.
1-Scouring section of L-Box: -
In the opening of the machine the fabric
passes through two Draw rollers are plastic coated. They grip the fabric
otherwise pull the fabric now fabric passes through the dancer roller, dancer
roller keep tight the fabric. Then fabric pass through the Nomatic rollers, there
are four Nomatic rollers opening of the machine. These rollers control the
width of fabric. These rollers have air pressure. Now fabric comes in washing
portion of machine, there are six washers opening of the machine. The
remaining desizing chemical present on the fabric, that is removed in washers.
The temperature of water in washers depends upon the quality of the fabric.
Mostly the temperature of water in fist washer is kept 92Co and the
temperature of other washer are kept 95Co. the temperature of water in fist
washer is kept 92Co so that do not become creases or shrinkage. A single
washer has 21 guide rollers. There are 10 guide rollers are above and 11 are
below. Five motors are present on a single washer, which are revolving the
guide rollers. Heat exchange filter take water from washers and drain. Heat
exchange pump take this cool water and gives to heat exchanger. Heat
exchanger warms the water at 60 and gives to washers. Sensors valve sense
the temperature of water in washers if temperature of water is not according to
the requirement then auto valve automatically opened after automatically are
closed. Steam pipes along with the washers. Booster pump is also connected
with heat exchanger, it gives fresh water to heat exchanger so that the pressure
Continous dyeing 23
DRAW ROLLER: -
Draw rollers are plastic coated. The functions of these rollers are
grip the fabric and pull out the fabric.
DANCER ROLLER: -
The functions of dancer rollers are keep tight the fabric.
SCRAY: -
The function of scray is when small quantity of fabric remains on the
batcher, we are used stray so that the edge of fabric on batcher do not mistake. The
fabric is felled on the stray slowly – slowly so that the edge of batcher fabric could be
caught.
NOMATIC ROLLER: -
Nomatic rollers have air pressure. The function of Nomatic
rollers are control the width of fabric. There are four Nomatic rollers at the opening of
the L-Box.
PADDERS: -
The function of Padders are squeeze he extra solution from the fabric
WASHERS: -
When fabric come from desizing machine, at that time it has enough
quantity of desizing solution it is removed in washers. There are six washers at the
opening of the machine. There are 21 rollers in a washer. There are 10 are above and
11 are below 2,4,6,8,10 rollers are driven by motors. There are 378 (Three Hundred
Seventy Eight) rollers in 18 washers. The temperatures of washers are kept according
to the quality of the fabric. The washers are connected with each other with pipes.
Continous dyeing 26
HEAT EXCHANGER: -
The function of heat exchanger, re-warm the water. The heat
exchanger pump takes cool water and supply to the heat exchanger. The heat
exchanger after taking cool water and after re-warm gives to the washers by pipe.
Heat exchanger warms water temperature 60Co. second heat exchanger present after
first steamer. This heat exchanger is also supply warm water to others 12 washers.
EXHAUSTS: -
The function of exhaust is exhausts the heat. There are 10 exhausts
present in L-Box.
STEAMERS: -
First steamer in L-Box has 64 rollers. At upper portion of steamer 13
Plaiter rollers. The running of fabric among these rollers in Zigzag form, fabric
comes on conveyer. The conveyer is perforated from bottom, at the top of conveyer
gaseous phase the temperature of these gaseous is 102Co. Liquid Phase, water
temperature is 100 Co. Water change into steam and convey to the fabric. After
conveyer tension rod is present which give tension to the fabric, the function of
expender in steamer spread the fabric, control the width of fabric. The shapes of
Continous dyeing 27
steamer expender like a spring. Now fabric comes in Mini Washing, present Padders,
expender and steel rollers. We supply the hot and cold water to Mini Washing.
Second steamer in L-Box has 17 rollers, other function similar to first steamer. If the
speed of machine is running 90 meter/minute then fabric present in fist steamer and
second steamer.
BOOSTER PUMP: -
The function of Booster pump supplies fresh water to heat
exchanger so that the pressure of water maintain in heat exchanger.
Continous dyeing 28
AIR COMPRESSOR: -
The functions of air compressor maintain temperature in
panel so that the working of panel do not disturb. For example: -
Inner panel temperature 28.7Co
Outer panel temperature 45.5Co
FEEDING PUMP: -
Mostly after maintenance of machine, a lot of solution is required
in saturators in a single passage. Therefore for supply of solution from solution tank
we use feeding pump it is also called a direct feeding.
DRYERS: -
There are 48 (Forty Eight) dryers are present at the end of the machine.
These dryers arrange in 4 columns. Each column contains 8 dryers and a tension
roller lie b/w two consecutive column to maintain the tension. After passing through
44 hot dryers then fabric pass through 4 cool dryers. In last four dryers cool water is
present so that temperature maintains pressure in dryers 0.35 MPa.
TYPES OF ROLLERS
FEED ROLLERS: -
Feed rollers used to control the speed of cloth in the machine.
Continous dyeing 29
DANCER: -
It is use to maintain the tension in fabric. It is also adjust according to the
quality of the fabric.
SEQUEEZ ROLLERS: -
It is use to maintain the pickup of fabric. The pickup also
adjusts according to the quality of the fabric.
SPREAD ROLLERS: -
It prevent the fabric from creasing
Continous dyeing 30
Continous dyeing 31
Continous dyeing 32
Continous dyeing 33
Continous dyeing 34
MERCERIZING
OBJECTIVES
To increase luster.
To increase the affinity for dyes.
To increase the tensile strength.
To give dimensional stability
Use of dye after mercerizing is less
Width control
After mercerizing increase cost of fabric Rs 2.70 per meter
In this process cotton is dipped in a solution of NaOH so that NaOH penetrated in to
the fibre and then NaOH is washed out completely by neutralizing by dilute acid like
sulphuric acid. When mercerizing fibre are examined under microscope. It is seen that
each fibres in twisted ribbon like form. After mercerizing fibres become cylindrical
and free from twists.
To increase the luster cotton must be prevented from shrinkage. This can be achieved
by stretching the yarn or fabric. Shrinkage of the fabric can also controlled by
mercerization.
1-How much Be are required according to this Be prepared but for 28 Be, 26 Be or 20
Be prepared according to program.
2-In order to grey fabric 12, 18, 15 caustic Be prepared according to program]
Continous dyeing 35
PREPARATION OF CAUSTIC
WORKING OF MACHINE
There are two saturators of mercerizing machine. The solution capacity of each
saturator is 700 liter. The solution comes from TIP. When solution above a limit again
come into TIP. NaOH pump take solution from TIP and supply to the heat exchanger.
Brine pump take water from chiller and supply to the Heat Exchanger, from heat
exchange again solution come in to saturators by piping.
When we required change the Be, take solution from TIP and give to third tank and
again solution is prepared. When solution come from saturators Rotary Filters clean
the solution. Fluff is drained and solution comes in to TIP. Similarly this circulation
continues. After passing fabric from 2nd saturator come on stenter, at the beginning of
the stenter Selvedge Guider, which are maintain the width of the fabric. Scale is
present on chain, on this scale mentioned the width of the fabric according to the
chain. There are Seven Shower Pump, these shower pump are supplying solution to
the fabric. There are Seven Suction Pump, these pump suck the solution. Stenter
wheel are revolving the chain. These are driven by motor. After this 11 (Eleven)
washers are present. The temperature of washers is 95Co after these 48 Dryers are
present. Last four dryers have cool water so that the temperature maintain.
Continous dyeing 37
NOTE: -
The capacity of machine is 480 meter fabric
TYPES OF MACHINARY:
There are two types of mercerizing machines.
1-Chain type mercerizing machine
2-Chain less type mercerizing machine.
Chain type KOTO JAPAN MACHINE parts and their function are following
ENTERENCE: -
After bleaching of the fabric is ready for mercerizing. Enterence section
contains guider tension rollers and spreaders. Fabric passes all these
rollers so that fabric contains no crease. Fabric passes through 4
selvedge rollers so that stretch the fabric in order to remove selvedge
crease. This zone also has a scray. It is also very important part of
Enterence. It is used when there is need to change batch of fabric. When
fabric of J- Scray runs the tension of cloth guider is increase because
there is more chance of crease.
1- SATURATORS: -
There are two saturators. The capacity of solution of each
saturator
is 700 liter. it contains caustic solution of required bombe. It
contains three
squeezing rollers and 2 spreaders and 8 Padders.
2- NaOH PUMP: -
NaOH Pump is taking solution from TIP and supply to the Heat
Exchanger, give solution by piping to the saturators.
3- BE CONTROL VALVE: -
How much quantity of Be is required? It is taken in a TIP
from mixers by operating Be control valve. It is being
operated from panel
Continous dyeing 39
4- BRINE PUMP: -
The function of brine pump is circulation of water. Brine pump
supply water to the heat exchanger.
6- RECOVERY PUMPS: -
When we changed the Be of TIP, we take solution from
TIP by first recovery pump and through into third tank.
The second recovery pump is present below showers. This
pump takes solution and give to the Recovery Pump.
7- ROTARY FILTER: -
Rotary filter, filter the dirty water. It drains the fluff and again
supplies water to the washers.
8- CHAIN WHEELS: -
These wheels give direction to the revolving chain. The length of
the chain section is 30 meter and total chain on one side is 60
meters the chain having no of clips. At the start of clips of chain
there is a circular plate that is also moving with the speed of
chain or clips. The function of the circular plate is to open and
closed the clips; in start we keep the width of the chain according
to the width f the fabric. When fabric run some meter width of
the chain is set to the required width of the fabric. Open the chain
Continous dyeing 40
width wise very slowly because there is a large chance of fabric tear. After some
distance chain contains 7 showers that shower caustic solution almost 8 bombe on
fabric. This is come from 1st and 2nd washer of mercerizing machine. The purpose of
these showers of caustic is to make sure the well penetration of caustic solution in
fabric.
9- SELVEDGE GUIDER: -
Selvedge Guider, control the selvedge of the fabric.
13- WASHERS: -
There are 11 (Eleven) suction pumps are present. There is
difference between first 3 and remaining 8. There difference is
their construction is change and their capacity of water is
changed. First 3 having 5 rollers up and 6 down and other washer
having 10 up and 11 down. The capacity of water in first three
washers 1000 liter and other washer having capacity of water
1500 liter. The temperatures of all washers are 90Co for cotton
and for cotton Lycra quality is 95Co. 25 meter fabric in single
washer.
Continous dyeing 41
14-DRYERS: -
. There are 48 (Forty Eight) dryers are present at the end of the
machine. The function of dryer is dry the fabric. These dryers
arrange in 4 columns. Each column contains 8 dryers and a
tension roller lie b/w two consecutive column to maintain the
tension. After passing through 44 hot dryers then fabric pass
through 4 cool dryers. In last four dryers cool water is present so
that temperature maintains pressure in dryers. The dryer
pressures are 0.35MPa.
Mercerized cotton can be identified by its microscopic view. Cotton fabric naturally
flat and twisted (ribbon like) after mercerizing fibre swell, untwist and their cross
section change in to round form.
CONDITIONS
• Cotton should be free from sizes and other impurities. If these are present then
mercerized solution should not well penetrate completely in fabric.
• Temperature required for caustic solution is 25 – 30 Co.
• NaOH is used for this purpose because it is cheap. KOH is also used but it is
expensive.
Continous dyeing 42
PRECAUTIONS
• Concentration of NaOH
• Machine temperature
• Extraction of alkali
• Steaming time
• Time
• Proper cleaning of machine
• Same lot of fabric should run at same speed.
• Concentration of alkali should be same for al lot of fabric.
FAULTS
1. If a thread remain in a clip then clip disable to grip properly.
2. If alkali remain in fabric for long time then fabric will weak also white
sport appear on fabric
NOTE: -
If want to cure fabric before dyeing then we do mercerizing after curing
because if we do mercerizing before curing then due to presence of alkali give
yellowness to fabric.
Continous dyeing 43
NaOH Be G / L
Be G/L
6.7 48.9
12 86.7
18.8 157.9
19.8 169
20.9 181
22 194
23 206
24 219
25 231.8
26 244.9
26.9 258
27.9 271
28.8 285.2
29.7 299
30.6 312
38 450
50 772
Continous dyeing 44
It is known from the technical literature (for example, W. Bernard Praxis des Bleichens und
Faerbens von Textilien [Bleaching and Dyeing Practice of Textiles], Springer Verlag, 1966)
and from pertinent publications that textile fabrics of polyester fibers and/or their blends with
cellulosic fibers can be continuously dyed by the so-called "Thermosol Process." In applying
this method, the fabric is impregnated with a cold to warm, aqueous dispersion of suitable
dyestuffs and auxiliary agents to a defined weight increase, dried, subsequently "thermally
fixed" at temperatures of 180.degree. to 220.degree. C., and again liberated from excessive
dyestuff by washing. During the thermal fixation, the dyestuffs diffuse into the polyester
fiber in a finely dispersed or monomolecular form, and are dissolved in the fiber. The
advantage of this method is the possibility of simultaneously fixing the polyester fibers and
obtaining very fast colors within a short period of time ranging from 40 to 120 seconds at
180.degree. to 220.degree. C.
A prerequisite for the success of the process is that the dyestuffs are already uniformly
distributed in the textile product after the impregnation and intermediate drying. If not,
nonuniform coloration will result. Another prerequisite is that the product is dried before the
thermal fixation, since otherwise the temperatures for the Thermosol Process will not be
reached because of evaporation of the dyebaths.
However, the Thermosol method has been found disadvantageous in practice, in that not all
textile fabrics of polyester fibers can be dyed by this process, and that it is absolutely
necessary to dry the product following the padding. In particular, it is not possible to dye pile
fabrics by this method, since the dyebath migrates to the pile tips and bases during the
intermediate drying, and thus, the product is dyed unevenly. Furthermore, the process is
uneconomical, since the fabric needs to be dried twice during the dyeing process. Even
though attempts have been made to overcome these disadvantages by the use of so-called
migration inhibitors and special padding assistants, they have been unsuccessful in the case
of the pile fabrics, such as, plushes, velvets and velours. A further problem with the pile
fabrics, due to their high bulk and insulating characteristics, is that it is not possible to
achieve Thermosol temperatures throughout the fabric in a reasonably short duration without
overheating and fusing the tips of the pile yarns or leaving inner portions of the fabric
insufficiently heated.
It is, therefore, an object of the present invention to develop a method for continuously
dyeing polyester fibers and filaments and/or their blends with cellulosic fibers, which
overcomes the aforementioned disadvantages and by which also pile fabrics can be
satisfactorily dyed.
Continous dyeing 45
Surprisingly, it has now been found that it is possible to continuously dye textile fabrics of
polyester fibers and filaments and/or their blends without having the aforementioned
disadvantages, when the fabrics are impregnated in an aqueous dyebath, containing
(b) commercially available disperse dyestuffs in an amount sufficient to dye the fibers to the
desired depth of color;
(c) 2 to 100 g/l of a partially sulfated adduct of ethylene oxide with an alkyl phenol or
C.sub.8 to C.sub.16 fatty alcohols, preferably nonylphenol or C.sub.12 fatty alcohol with 1 to
6 mols ethylene oxide;
(e) 5 to 50 g/l of at least one organic compound selected from the group consisting of
aromatic nitrile ethers and ethoxylated chlorophenols.
The method of the present invention is characterized in that it is applicable to all fabric
constructions, and that intermediate drying is not needed. Based on the special composition
of the dyebath, it has thus been made possible to dye polyester fibers, which could not be
dyed by steaming in a continuous process under the aforesaid conditions. Such a method has
been so far unknown, and is both a considerable technical and economical advance over the
prior art (Thermosol Process).
This method is also particularly suitable for dyeing woven blends of polyester and cellulosic
fibers. Cellulosic fibers include both natural fibers, such as, for example, cotton or linen, and
regenerated fibers, such as, for example, rayon or viscose, as well as esterified cellulosic
fibers, such as, for example, diacetate or triacetate.
This method permits dyeing of the aforesaid fibers in their composition as textile fabrics,
such as, for examples, fleeces, tricots or knits, but, in particular, woven fabrics. The textile
fabrics may be both flat fabrics and, particularly, pile fabrics, such as, for example, velvet,
plush or velours. The method is especially suited for dyeing polyester pile fabrics, which
heretofore could not be successfully dyed in a continuous process.
Of essential importance for the invention is the composition of the dyebath. The individual
operations for application of the dyebath, such as immersion, padding, spraying, scraping on,
application of foam, impregnation; and the subsequent treatments, such as steaming,
washing, and drying are per se conventional steps and employ known types of apparatus, as
are described for example in M. Peter, "Grundlagen der Textilveredelung" [Basics of Textile
Finishing], 11th edition, Deutscher Fachverlag, Frankfurt, pp. 43-47 and pp. 233-237.
According to the invention, the textile fabrics are impregnated in an aqueous dyebath by
suitable application methods, such as immersion, padding, spraying, scraping on, or by the
application of foam, up to a weight increase (wet pickup) of 60 to 250%, preferably 80 to
200%, and, in particular, 80 to 160%, then directly steamed in their wet condition for 1 to 20
minutes, at 96.degree.-105.degree. C., preferably 98.degree.-102.degree. C., then again
washed several times at 20.degree. to 60.degree. C., mechanically drained and finally dried at
140.degree. to 210.degree. C., preferably 170.degree. to 200.degree. C., for 1 to 10 minutes,
preferably 2 to 8 minutes, and in particular 2 to 6 minutes.
(b) up to 150 g/l (preferably 0.05 to 150 g/l and particularly 2 to 50 g/l) commercially
available disperse dyestuffs;
(b') up to 100 g/l (preferably 0.05 to 50 g/l, and particularly 2 to 50 g/l) commercially
available direct dyestuffs;
(c) 2 to 100 g/l (preferably 5 to 60 g/l) of a partially sulfated adduct of ethylene oxide with an
alkyl phenol or C.sub.8 to C.sub.16 fatty alcohols, preferably nonylphenol or C.sub.12 fatty
alcohol with 1 to 6 mols of ethylene oxide;
(d) 0 to 60 g/l (preferably 2 to 30 g/l) nonionic or anionic surfactants, which may, for
example, comprise at least one member selected from the group consisting of alkane
sulfonates, alkylaryl sulfonates, sulfonated carboxylic acid esters, sulfonated carboxylic acid
amides, or C.sub.12 to C.sub.25 fatty acids; and preferably C.sub.12 to C.sub.14 alkane
mono-sulfonate or sodium dioctylsulfosuccinate; and
Continous dyeing 47
(e) 5 to 50 g/l (preferably 5 to 20 g/l) of at least one organic compound selected from the
group consisting of aromatic nitrile ethers or ethoxylated chlorophenols in emulsified form.
The dyestuffs under (b') may be used in addition to the disperse dyestuffs of (b) when the
fabric contains cellulosic fibers or yarns in addition to the polyester fibers or yarns.
Suitable thickeners may include nonionic and/or anionic products as can be derived from the
addition of ethylene oxide, from the oxidative or thermal decomposition or, respectively,
carboxymethylation of guar or locust bean powder; or cellulose, starch or algin derivatives.
Suitable thickeners include carboxymethylcellulose, carboxymethylstarch, alginates, such as
the sodium, potassium or ammonium salts of algin. Particularly suitable are products derived
from the addition of ethylene oxide as well as products with a 0.3 to 0.7 degree of
substitution.
The method of the present invention may employ any of the usual commercially available
disperse dyestuffs generally recognized as suitable for polyester. They may be used both as
dispersed powders and aqueous dispersions. Particularly suitable are disperse dyestuffs with
a relatively large molecule and of a particularly high lightfastness. The disperse dyestuffs
may be used both alone and in combination with direct dyestuffs. From a chemical
viewpoint, the disperse dyestuffs belong to the class of the azo or anthraquinone dyestuffs.
Likewise, the usual commercially available direct dyestuffs conventionally used for
cellulosic fibers may be employed in this process. They are water soluble and can belong to
the various chemical classes of dyestuffs, such as, for example, azo dyestuffs, anthraquinone
dyestuffs or metallized dyestuffs. The dyestuffs particularly suitable for the method of the
present invention, are selected by their solubility, high color absorption and high
lightfastness. Both the disperse and direct dyestuffs may contain the usual dispersing and
pulverizing assistants as well as diluent substances or salts.
Also of importance for the present method is the use of partially sulfated adducts of ethylene
oxide with alkylphenols or C.sub.8 to C.sub.16 fatty alcohols, identified above as component
(c). Preferred are partially sulfated adducts of nonylphenol or C.sub.12 fatty alcohols with 1
to 6 mols ethylene oxide. Specific examples include: the ammonium salt of a partially
sulfated adducts of nonylphenol with 5.5 mols ethylene oxide, the sodium salt of a partially
sulfated adduct of nonylphenol with 4 mols ethylene oxide, the sodium salt of a partially
sulfated adduct of a C.sub.12 fatty alcohol with 2 mols ethylene oxide, the ammonium salt of
a partially sulfated adduct of nonylphenol with 2.5 mols ethylene oxide, and the ammonium
salt of a partially sulfated adduct of octylphenol with 6 mols ethylene oxide.
These products are obtained by the partial sulfation of the adducts from ethylene oxide with
alkyl phenols or fatty alcohols respectively. The degree of the ethoxylation and sulfation may
widely vary, and the products are obtained in the form of their ammonium or alkali, in
particular sodium, salts. The component (c) acts as an emulsifier and dispersant for the dyes
and can be directly added to the dyebath.
Continous dyeing 48
The dyebath also desirably includes anionic and nonionic surfactants, identified above as
component (d). Suitable surfactants may be selected from ammonium or alkali metal salts of
alkane sulfonates, sulfonated carboxylic acid esters, or sulfonated carboxylic acid amides.
Preferred are C.sub.12 to C.sub.14 alkane monosulfonates or sodium dioctylsulfosuccinate.
Specific examples include: the sodium salt of sulfosuccinic acid 2-ethylhexylester, the
sodium salt of C.sub.12 to C.sub.16 alkanesulfonate, and the sodium salt of sulfosuccinic
acid C.sub.12 hemi-amide.
These, in general, are wetting agents which are known to the person skilled in the art under
the description of rapid wetting agents. In the method of this invention, these agents serve as
wetting agents during the application stage and also serve to generate foam in the steaming
stage to promote level and even dyeing, especially of pile fabrics. Chemically, they are
C.sub.12 to C.sub.16 alkane sulfonates, monoesters and diesters of sulfosuccinic acid, or
monoamides or diamides of sulfosuccinic acid. The component (d) can be directly added to
the dyebath. Also suitable are ammonium or alkali metal salts of alkylarylsulfonates, such as
sodium dodecyl benzenesulfonate; ammonium or alkali metal salts of lauryl sulfonate, such
as sodium lauryl sulfonate; ammonium or alkali metal salts of ethylene oxide adducts of
lauryl sulfonate, such as the sodium salt of the addition of 1 to 6 mols of ethylene oxide to
lauryl sulfonate; and ammonium or alkali metal salts of ethylene oxide adducts of C.sub.12 to
C.sub.25 fatty acids, an example of which is the adduct of 9 to 50 mols of ethylene oxide to
octadecanoic acid.
Component (e) as described above may comprise accelerators based on aromatic nitrile
ethers or ethoxylated chlorophenols in emulsified form, in particular, benzyloxypropionitrile,
chlorobenzyloxypropionitrile and methylbenzyloxypropionitrile, as well as di- and
triethylene glycol monochlorophenyl ether. Preferably the nitrile ethers have a molecular
weight of 100 to 250, in particular, 150 to 200, and that of the ethoxylated chlorophenols
ranges from 150 to 400, in particular from 200 to 300.
These products are water insoluble, high-boiling liquids, which are capable of softening the
polyester fibers under the conditions of the method according to the invention. Therefore,
they make possible and accelerate the diffusion of the disperse dyes into the polyester fibers.
Commercially available products of component (e) are either pure substances or contain
emulsifiers. Pure substances are added with the aforesaid assistants to the padding liquors in
emulsified form. Particularly suitable components (e) for the present method are di- and
triethyleneglycol monochlorophenyl ethers and benzyloxypropionitrile. Preferred emulsifiers
for the component (e) are ethoxylated C.sub.16 to C.sub.18 fatty alcohols with 10 to 25 mols
ethylene oxide.
The described assistants (c), (d), and (e) can be used both alone and combined with each
other, and the sum of the quantities used can vary from about 2 to about 200 g/l of the
dyebath.
Aside from the aforesaid ingredients, the dyebath may contain additional assistants, such as
dispersing agents, wetting agents, antistatic agents and defoamers.
Continous dyeing 49
The following examples are intended to describe the invention in more detail, but not to limit
it.
EXAMPLE 1
A raschel plush product of polyester (Trevira 220) was impregnated in a bath containing:
25.0 g/l Ammonium salt of a partially sulfated adduct of nonylphenol with 5.5 mols ethylene
oxide;
The material was impregnated on a padder with a 95% absorption of the bath. The product
was then steamed for 10 minutes at 99.degree. C. in a saturated vapor atmosphere, and
subsequently washed five times in 30.degree. C. water.
The material was then drained by squeezing to 75% residual moisture, and finally dried for 3
minutes on a tenter at 180.degree. C. A grey, very uniform pile fabric was obtained with
suitable lightfastness and good general fastnesses to rubbing (crocking) and washing.
EXAMPLE 2
2.5 g/l locust bean powder ethoxylated with 1.5 mols ethylene oxide per OH group.
40.0 g/l Sodium salt of a partially sulfated adduct of nonylphenol with 4 mols ethylene oxide
The fabric was then steamed for 15 minutes at 98.degree. C. in a saturated vapor atmosphere,
then washed three times in 50.degree. C. water, mechanically drained to 75% residual
moisture, and dried for 2.5 minutes on a tenter at 190.degree. C. The result was a dark red,
uniformly dyed pile fabric with good fastnesses and a lightfastness of 7. The lightfastness
was determined in all examples according to both the Opel Standards GME 60292 of 11/77
and by the FAKRA test.
EXAMPLE 3
A woven velour of 55% polyester, 35% cotton and 10% rayon was impregnated by applying
foam from a bath with the following ingredients (80% absorption of the bath):
3.5 g/l water soluble guar derivative (1.0 mol ethylene oxide per OH group)
20.0 g/l Sodium salt of a partially sulfated adduct of a C.sub.12 fatty alcohol with 2 mols
Continous dyeing 51
ethylene oxide
Following its impregnation, the material was steamed for 8 minutes in a saturated vapor at
100.degree. C., washed four times in 50.degree. C. water, mechanically drained to 80%
residual moisture and dried for 2 minutes at 200.degree. C. The result was a light brown,
completely uniformly dyed product with excellent fastnesses.
EXAMPLE 4
A plush fabric with polyester pile and a cotton and triacetate blend in the backing was
impregnated in the following bath:
60.0 g/l NH.sub.4 salt of a partially sulfated adduct of nonylphenol with 2.5 mols ethylene
oxide
Impregnation was done on a two-roller padder with 100% absorption of the bath. Then the
material was steamed in its wet condition for 14 minutes in a 98.degree. C. saturated vapor
atmosphere, subsequently continuously washed in 5 baths at 45.degree. C., and drained by
squeezing to 65% residual moisture, and finally dried for 4 minutes on a 6-section tenter at
185.degree. C. The result was a medium to dark blue, uniform coloration with a lightfastness
of 7 and very good general fastnesses.
Continous dyeing 52
EXAMPLE 5
A liquor consisting of
35.0 g/l NH.sub.4 salt of a partially sulfated adduct of octylphenol with 6 mols ethylene
oxide
was scraped with a 200% absorption of the bath on a tricot of 70% carrier-free dyeable
polyester, 20% cotton, and 10% rayon, which was then steamed for 15 minutes at 98.degree.
C. It was then washed three times at 45.degree. C. and drained to 80% residual moisture, and
finally dried for 8 minutes at 160.degree. C. The result was a blue grey, uniform coloration
with excellent fastnesses. The lightfastness according to the so-called "Opel Test" ranged
from 6 to 7.
EXAMPLE 6
A tricot product of 100 percent polyester was preset for 45 seconds at 180.degree. C. Then
the fabric was impregnated by padding with a liquor consisting of:
50 g/l Sodium salt of a partially sulfated adduct of nonylphenol with 4 mols ethylene oxide
25 g/l Benzyloxypropionitrile
The absorption of the bath amounts to 86%. The fabric was steamed for 9 minutes at
99.degree. C. in a saturated vapor atmosphere and then washed three times in 50.degree. C.
water, mechanically drained to 80% residual moisture, and dried for 2 minutes on a tenter at
180.degree. C. The result was a dark red, uniformly dyed fabric with good fastness.
Continous dyeing 54
Pad-thermosol
It is a machine which is used to pad, dry and cure to all kinds of fabrics. This machine is
categorized under continuous process of dyeing.
• Batcher
• Guide rollers
• Screy
• Cooling drum
• Cooling jacket
• Trough
• Squeezing rollers
• Padder
• VTG rollers
• IR-dryers
• Drying chambers
• Radiator
• Heat exchanger
• Curing chamber
• Piller
Now we will see these parts individually by using figures.
Batcher:
When the fabric is taken to dye , it is in the form of batcher that is taken after
mercerizing as shown in the following fig.
Continous dyeing 55
The fabric width depends on the size of the batcher and the fabric of different length is
winded on it . This length may vary from 100 to 70,000 meters.
Guide rollers:
These are the rollers which are used to guide the fabric from different paths. Their
function is only to direct the fabric toward it’s outlet. Guide rollers are shown in the
following fig.
Cooling drums:
When the fabric is taken from the mercerization then it’s temperature is more
than the limit. In this state the fabric cannot be react properly with dye in the trough. So we
use cooling drums in which water is circulating and the temperature of fabric is decreasing
gradually. Their diameter is large as cpare to other rollers that is ranges from 26’’ to 30’’.
Cooling jacket:
This jacket has very important role in cooling the dye bath. It is necessary
because in hot form dye cannot react with the fabric. Cool water circulate within this jacket
Continous dyeing 56
Trough:
It is the first main part of this machine. This part is filled with liquor which is filled
with dyes and chemicals . it’s capacity is nearly 1400lilres. It is dozed manually as well as
automatically. The dozing structure is shown in the following fig.
The temperature of this bath is room temp. the fabric capacity is 1-1.5m within this dye bath
or trough.following recipe is used in this trough,
• Dyes
• Urea (moisturizing agent)
• Soda ash( for reactive dyes)
• Sodium bicarbonate(for pigments)
• Primazol FFAM (anti-migrating agent)
• NF
Cooling jacket:
It is a jacket that is used in outer side of the trough. This jacket is used to make
the temperature of liquor cool down , because if it will not cool down then the dye liquor
will not react properly.
Squeezing rollers;
These rollers have function just to squeeze the fabric which is dipped in dye
bath. In this way dye can react completely with the fabric. It is a pair of roller that moves in
opposite direction and squeeze the dyed fabric. They are rubber coated and have diameter
8’’.
Continous dyeing 57
Padder
This is the main part of the machine. All the pick-up of dye depends upon the padder.
It is a pair of two rollers. Two rollers move in opposite direction to each other. These rollers
are also rubber coated but have special type. L-C-R (left-center-right). This is the most
sensitive factor that require more concentration than any other part. Basically L-C-R fault
means that the fabric dye is varying from left,right and center. The structure of padder is
shown in the following fig.
We can say that there are three parts of padder on which pressure is adjusted to avoid L-C-R
fault. This pressure varies according to the width of the fabric and pickup of dye. Usually
pick-up is 60%.
Continous dyeing 58
VTG-rollers:
These are called vertical tentioner guide rollers . These are the rollers that give
tension and rest to the dyed fabric and fabric contact with air. There are 9 rollers that are used
for this purpose,5 above(driver) and 4 down (driven). The structural diagram is shown in the
following fig.
These rollers contain 9-10 m fabric within their area. The time taken by the fabric on these
rollers is 10-12seconds.
IR dryers:
These are called infra red dryers. IR-dryers are also called pre-dryers. 30% of fabric is dry
in this section. The temperature of these dryers vary from 1000-1300C. these dryers have
very important role in dyeing the fabric uniformly. The fig. of IR is shown as follows,
When the fabric is passed from the padder then there is an uneven dyeing that cause the face-
back problem on the fabric. The structural diagrame of the dye particles shown in the figure
after padding as
Continous dyeing 59
Two IR are used for heavy quality and one is used for light quality.And when the fabric is
passed through the IR dryers the dye par2ticles migrate from surface to the core of the fabric
with help of infra red rays. After passing through IR the the dye particles are shown bellow
on the fabric surface,
Drying chambers:
There are two drying chambers used for thermosoling .These are the
chambers where thermosoling is done. The fabric passes through the rollers in the chamber
and thermoil react with fabric in these chambers. The diagram is shown in the following fig.
The thermoil is given to the chambers in pipes attatched to the radiator and it circulates
within the chamber with the help of circulating fans. The fig. of heat exchanger is shown in
the following fig
Continous dyeing 60
The temperature of these dryers vary with quality of the fabric and dye stuff used because
different dye stuff have different range of temperature for it’s fixation , 20% fabric is dry in
these chambers. The temperatures of some quality and dye stuff are given bellow.
Quality 18*18/60*60
Speed 40m/min
Temperature 115C 125C
Dye stuff Vat
Quality 20*10/72*28
Speed 40m/min
Temperature 110C 125C
Dye stuff Reactive (remazol)
Quality 16*16/60*60
Speed 30m/min
Temperature 120C 145C
Dye stuff Reactive (remazol)
Continous
Continous dyeing 61
Curing chambers
There are two chambers that are responsible for the curing process. Curing
chambers are used for the fixation of the dye into the fibre.These are the chambers where
remaining fabric is dry i.e 50%. As there is more temperature within these chambers so we
need moisturizing agent that produce the humidity within the chambers and the fixation
process is carried out. For producing the moisture we use urea as a moisturizing agent. This
chemical is mixed with the dye recipe in the trough. The curing chambers are shown as
follows,
Like drying chambers these chambers also have different temperature according to the dye
stuff and quality of the fabric. Some temperatures are shown as,
Quality 18*18/60*60
Speed 40m/min
Temperature 150C 150C
Dye stuff Vat
Quality 20*10/72*28
Speed 40m/min
Temperature 150C 150C
Dye stuff Reactive (remazol)
Continous dyeing 62
Quality 16*16/60*60
Speed 30m/min
Temperature 165C
Dye stuff Reactive (remazol)
Pillers :
This is a device that convert the straight fabric into pile form. It is used for he trolly
outlet. If there is batcher at delivery then it is not used, but usually trolly is used after screy.
Light box:
When the fabric is delivering then it is checked in a light box after 500m or 700m
depends on the requirement. L-C-R (left-center-right) of the fabric is checked in this box to
avoid shade variation from all sides. There are few kinds of lights under which fabric is
checked ,it is also depends on the requirement of the customer.
Day light
D-65
Sun light
Ultra voilet
Flouricent light
Continous dyeing 63
Pad-steam
It is a machine that can dye ,steam and wash the fabric. It is an omportant part of continous
dyeing . when the fabric is dyed then washing is required so we use pad-steam after
thermosol range. In case of polyester/ cellulose blended fabrics we use this machine for
developing,steaming and washing of the fabric.
Parts of machine
There are following parts of machine that are responsible to handle the fabric during pad-
steam processing,
• Screy
• Cooling cylinders
• Padder
• Trough
• Steamer
• Washing boxes
• Drying cylinders
Some parts are studied in pad-thermosol topic remainings are given as follows,
Steamer:
It comes right after padder It is a main part of the machine which is used for steam the
dyed fabric. The temperature of this section is 100°C. the fabric remains here according to
the dye stuff given as follows
Washers:
There different amount of boxes in different machines prepared by the companies. These
washers are suitable for
Washing
Rinsing
Soaping
Oxidation
Soaping is necessary to remove unfix dye particles from the fabric and then it is washed.
Oxidation is the process in which the vat dyes are developed. In first padder reduction is
done and in second padder of pad-steam oxidation is carried out to resize the dye particle of
vat dyes. That is why vat dyes have very good washing fastness.
The temperature of these washres are set according to the process and dye stuff. It will
discuss in last topic.
The special features of this technology lie in the combination and operation of the
components and the design of the washing liquor guidance
Continous
Continous dyeing 65
The parameters of the washing machine can be set at will and are maintained thanks to the
modern control system. This enables the various tasks in respect of water, counter flow and
process guidance to be realised.
Process concepts
The following process steps occur:
Pre-treatment process
The last three washing compartments in the pre-treatment process are operated in the
classical form. The washing water flows through these three compartments in counter flow.
A defined partial flow is taken from the overflow and fed into the washing compartments in
the front area of the installation. This partial flow serves to re-concentrate and determines the
amount of sizing concentrate produced during the pre-treatment. A counter flow of washing
water passes through the front washing compartments again. Another part of this highly
concentrated washing water is applied to the fabric at the intake of the machine using a high
pick up application aggregate.
The fabric then reaches the steamer. The sizing agent swells in the steamer and the viscosity
of the swollen sizing agent is reduced. Immediately after leaving the steamer, the fabric
passes over the first suction bars where the size concentrate is extracted. The concentrate is
fed into the water seal of the steamer, which operates on the overflow principle. The
concentrate accumulated via the overflow represents the volume available for recycling or for
re-use.
The amount is determined and controlled according to the portion taken out of the last three
washing compartments. This ensures that the process conditions and parameters are
maintained. The pre-treatment or de-sizing can be carried out in two different processes:
· Cold store bleaching with oxidative de-sizing.
· De-sizing with water soluble sizing agent: De-sizing takes place directly in the washing
machine. The advantages of this process lie in the fact that the fabric is dry when it enters the
machine and wet when it leaves the washing machine. This moisture is removed from the
process and therefore reduces the accumulation of wastewater. In addition, the sizing agent
has not been modified or degraded and can therefore be recycled.
The concentrate that accumulates during the pre-treatment is collected in a separate container
and then fed into a specially developed evaporator The concentrate is evaporated and the
residual solids then removed. This is, in principle, a two-step roller dryer. A small part of a
heated roller is immersed in the liquid and coated with a film of concentrate. The first step is
to increase the concentration of the sizing concentrate. The second step is the complete
evaporation of the water and the subsequent removal of the dried residual solids with a
scraper. Thermal disposal is carried out on the residual solids.
The use of the Hydrovac vacuum results in a reduced water consumption because the highly
concentrated hydrolyzates have already been extracted from the fibre core and removed in
the pre-rinsing process.
Another option is a new electrochemical process in which the dye concentrate is decolourised
and subsequently released into the communal sewage.
Results
De-sizing / Pre-treatment
The small volume facilitates evaporation directly at the place of origin. This suits VAN
CLEWE, from an economical and ecological point of view, because it is cheaper than
treatment at the
municipal sewage plant. Van Clewe increases the solvent concentration in the roller
evaporator, as described above, and then recycles the residual solids in a thermal disposal.
Table 1 lists the material balances and liquor flows.
Continous dyeing
dyeing 68
The regional environmental circumstances are taken into account early in the project phase.
Only a specific adaptation of the concept and machine guarantees the expected success.
The water quantities were optimised by visually inspecting the washing water in each
compartment . Simultaneously, extracted samples of the textile were analysed and a
correlation of the fastness level established.
The impurities in the equation remain the same, however the considerably lower amount of
washing water results in significant energy savings in the form of steam required for the
washing process.
The washing water is fed into a multistage membrane plant. The smaller quantities of water
also allow the utilisation of a smaller plant compared to that found in conventional washing
systems. The result is a greatly reduced investment and a drop in electrical energy
consumption of the membrane plant, leading to lower running costs of the entire processing
system.
Using a combination of ultra-filtration and reversed osmosis can result in a recycling rate of
more than 80% of the wastewater. The recycled process wastewater is decolourised after
Continous dyeing 69
treatment with the membrane plant, has a COD value of approx. 100 to 300 mg/l and a
conductibility of approx. 100 µS/cm.
Future prospects
The extent of the successful reduction of the flow volumes during pre-treatment and washing
out dyes is impressive. The COD load in the wastewater has been reduced by 90 - 95 %. All
the water from the washing out process can be re-introduced into circulation. This has
allowed the effective water consumption needed to process one kg of fabric to be reduced to
1/7 of what is conventionally required.
and economically interesting process. The costs are approx. € 2.50,-- per m3 concentrate.
Decolourising the concentrate can, depending on the dye combination, constitute 70 - 90 %
of the initial dye value (DFZ). When considering a medium-sized textile finishing company
with 2 CPB dye stations, which today accumulates between 0.8 - 1.0 m3 of concentrate from
the padder chassis and the membrane plant each day, one finds that the decolourising costs
are virtually negligible. This technology has been developed by the Textile Institute in
Dornbirn (Austria), Dystar and BENNINGER Ltd as a solution to decolourise dye
concentrate without producing any additional by-products such as effluent sludge and
chlorine.
Continous dyeing 70
Dyeing processes
• Exhaust dyeing
• Semi-continous dyeing
• Continous dyeing
Exhaust dyeing:
In this type of process the dye move from the dye bath liquor onto the fibre in a
set time. During that time , it diffuses or migrates into the structure of the fibre, and is fixed.
Exhaust dyeing is used for loose stock (fibres), yarns , fabrics and garments. The method of
dyeing may include the following machines,
Jet dyeing
Jigger dyeing machine
Beam dyeing
And small to medium sized batches can be processed using this method.
Semi-continous dyeing:
In this type of dyeing the material may be padded with the dye solution on
mangle and finished off on a jigg.
Continous dyeing:
In this method the material may be passed through a trough of dye liquor .
After passing it through liquor then it is passed through a pair of squeezing rollers that
squeeze the excess liquor from the material. The lower the percentage pick-up , the higher
the concentration if the liquor can be achieved. For this purpose pad-thermosol and pad
steam is used to dye the material in continous dyeing range.
Continous dyeing 71
There are different advantages and disadvantages both methods have. Following is the
difference between them.
______________________________________________________________________
Reaction of fibre or rate of slow rate higher rate
Absorbtion
______________________________________________________________________
Ratio of contact exchange better to be higher better no to exchange
b/w fibre and dye
______________________________________________________________________
Padding solution gradually change constant
______________________________________________________________________
Mechanical and physical stepwise change in temp. all conditions kept constant
solution
______________________________________________________________________
Equipment required for each one machine for all special equipments
Process processes for each process
______________________________________________________________________
Costs of equipment relatively cheap expensive
______________________________________________________________________
Processing efficiency low high
______________________________________________________________________
Irregular performance of possible to cover in impossible
Equipments certain degree
______________________________________________________________________
Quality of dyeing excellent slightly inferior
______________________________________________________________________
Continous dyeing 72
There are different types of dye stuff used in continous dyeing. Each dye stuff has it’s own
reaction and behavior with fabric . Some have good washing fastness and some has low
washing fastness, some has high priced value and some are cheaper.
Navy cc
Navy SG
Terq SBG
Yellow S4G
CHEMICALS
NAME PURPOSE
· Reactive
· Direct
· Vat
· Sulphur
· Azoic (naphtol).
Reactive dyes
Vinyl Sulfone dyes, also known as Remazol® dyes after the trademarked name under which
they were first introduced, are a type of fiber reactive dye that is often used in silk painting.
Although silk paintings made with vinyl sulfone dyes are usually steamed to set the dye, the
dyes can also be "batch cured" at warm room temperatures.
Unlike some fiber reactive dyes, vinyl sulfones can be used as true reactive dyes on cotton,
silk, AND wool. Of course, wool must never be subjected to the high pHs used in dyeing
cotton, and it requires high heat, unlike cotton. Like all dyes that work on cotton, vinyl
sulfones can also be used on linen, hemp, and other cellulose (plant) fibers.
Vinyl sulfone dyes are a type of fiber reactive dye that is less reactive than, for example,
Procion MX dyes, and thus they both last longer in solution in water, and require more heat
for the reaction with the fiber. This means that they can actually be purchased already
dissolved in water, unlike Procion MX or Cibacron F dyes, eliminating the one slightly
hazardous step of working with powdered dyes.
The lower reactivity of Vinyl sulfones is not the whole story, however. Unlike Drimarene K
and Cibacron F dye, Vinyl sulfones contain a 'masking' group, on the reactive part of the
molecule, which prevents them from reacting with the dye water until it is removed. This
makes the dyes much longer lasting in water! The masking group of at least some of the
Remazols can be removed at high pH (i.e, with soda ash or pot ash or sodium silicate), which
is suitable for cotton, or, if the dye solution is heated to a high enough temperature, at mildly
acid pH, which is suitable for wool. The latter is a slower process.
Continous dyeing 77
Here is a quote from Cellulosics Dyeing (ed. John Shore, 1995, Society of Dyers and
Colourists), p 200:
The Remazol (Hoesht) vinylsulfone dyes, containing the characteristic 2-
suphatoethylsulphonyl precursor grouping, are intermediate in reactivity between the high-
reactivity heterocyclic systems, such as dichlorotriazone [Procion MX type] or
difluropyrimidine, and the low-reactivity ranges, such as aminochlorotriazine [Procion H] or
trichloropyrimidine. Exhaust dyeing temperatures between 40 and 60 degrees C may be
chosen, depending on pH, since caustic soda [NaOH?] is often selected to bring about
alkaline hydrolysis of the precursor sulphate ester. [Use "ph"s if you're British, "f"s if
American.] These dyes are applicable by a wide variety of batchwise and continuous
processes. The substantivity [tendency to cling to the fiber even when unreacted] of many of
these dyes is markedly lower than that of typical haloheterocycloic dyes [eg Procion MX or
Cibacron F]. Not only has the vinylsulphone group, unlike the heterocyclic ring systems,
little if any inherent affinity for cellulose, but the terminal sulphato group enhances the
aqueous solubility of the precursor form before 1,2-elimination to the vinylsulphone. In
contrast to the haloheterocyclic systems, the dye-fibre bonds formed by the vinylsulphone
dyes are at their weakest under alkaline conditions.
I.e., use temperatures between 40 and 60 C (104 and 140 F), and use alkaline conditions
(high pH, as usual with fiber reactive dyes). High pH *might* work for discharging. Should
resist acid perspiration better than Procion MX or Cibacron F dyes, if that's a problem for
you. Should be vastly easier to wash out of the fabric than Procion MX or Cibacron F dyes.
One third of dyes used for cellulose fibres today are reactive dyes. They are mostly applied
according to the pad-batch and continuous processes for woven fabric, while batch processes
are the most common for knitted fabric, loose stock and yarn.
In batch dyeing, dye, alkali (sodium hydroxide or sodium carbonate or bicarbonate) and salt
are added to the dye bath in one step, at the start of the process, or stepwise. In the stepwise
process the alkali is added only after the dye has absorbed to the fibre. Its amount is
determined by the reactivity of the system and the desired depth of shade (cold dyers are
applied at lower pH compared to warm and hot dyers). Salt is added to improve bath
exhaustion: the concentration employed depends on the substantivity of the dye and on the
intensity of the shade. Higher concentrations are required for deep shades and low-affinity
dyes, as shown in the table below.
In pad dyeing processes dye and alkali can be added together to the dye liquor or in separate
steps into two separate padders (or other types of application systems). When all the
chemicals are applied in one step, the stability of the pad liquor is important. In fact with
increasing reactivity of the dye there is a risk that the dye, after a long dwell time in the pad
box, is hydrolysed by the alkali, before reacting with the fibre. For this reason dye and alkali
are commonly metered separately into the padder. In addition, pad boxes are now constructed
so that the liquor volume is as low as possible, so that it is replaced on average within 5
minutes [186, Ullmann's, 2000].
Among semi-continuous processes the cold pad-batch is by far the most important one for
reactive dyes. After the textile has been padded with dye and alkali, it is rolled up into
batches. Fixing takes place during storage.
In continuous processes, padding, fixing, washing-off and drying are carried out in the same
process line. Fixation is commonly achieved either by dry-heating or by steaming. The
following processes are commonly used:
· pad-steam processes (one common method is the pad-dry-pad-steam process which includes
dye application by padding - intermediate drying - alkali application by padding - dye
fixation with saturated steam - washing - drying)
· pad-dry thermofix processes (dye and alkali are padded at the same time; then the material
can be dried and fixed in a single step or it can be thermofixed after an intermediate drying
stage).
In all cases, after fixation the material is always carefully washed off in open width or in a
rope washing machine to remove completely the hydrolysed colourant and is then dried.
In pad-dry thermofix processes, urea is usually added to the padding liquor to act as a solvent
for the dye during fixation. Urea melts at 115°C and binds water above 100 °C. It can
therefore be used as solvent for the dye in dry heat. A recently developed dyeing process is
now available that does not require the addition of urea.
Urea is also sometimes used in pad-batch processes as dyeing solvent to increase the
solubility of the dye. As early as 1992 the use of urea as dyeing solvent was already in
decline [61, L. Bettens, 1999]. New highly soluble reactive dyes have been introduced in the
market which do not need urea even for deep dyeing in highly concentrated dye liquor.
Continous dyeing 79
Direct dyes
OH
-N= N-
- -Na HCO- -NH2
Na O3 S
Direct dyes are also quite important in cellulose fibres dyeing: 75 % of the total consumption
of these colourants is used, in fact, to dye cotton or viscose substrates Direct dyes are applied
directly from the dye bath together with salt (sodium chloride or sodium sulphate) and
auxiliary agents, which ensure a thorough wetting and dispersing effect. Mixtures of non-
ionic and anionic surfactants are used for this purpose.
In the batch process the dye is made into paste, then dissolved in hot water and added to the
dye bath. The electrolyte is then added to the dye bath. After the dye bath has been drained,
the fabric is washed with cold water and generally subjected to after-treatment.
· pad-steam
· pad-roll
· cold pad-batch
· pad-jig process (the material is padded with the dye and then passed through a salt liquor in
a jigger).
In all processes the material is rinsed at the end with cold water.
With increasing depth of colour the wet fastness can decrease to such an extent that after-
treatment must generally be carried out [186, Ullmann's, 2000]. Two methods exist:
1. removing the unfixed dye by washing with complexing agents or surfactants with a
dispersing effect
2. reducing the solubility of the dye by blocking the hydrophilic groups («enlargement of the
molecule»).
Various techniques can be applied to achieve this enlargement of the molecule. Namely, the
dyed textile can be treated with:
· fixative cationic agents: these are complex substances that form with the anionic dye a salt-
like compound less soluble than the original dye. Quaternary ammonium compounds with
Continous dyeing 80
long hydrocarbon chains, polyamines and polyethyleneimine derivatives can be used for this
purpose
· metal salts: copper sulphate and potassium dichromate can form with certain azo dyes
metal-complex with higher light fastness
· diazotised bases: after dyeing, the material is submitted to diazotisation and is then coupled
with aromatic amines or phenols that must not contain hydrosolubilising groups [186,
Ullmann's, 2000].
• k. VIOLET RL VIOLET 47
Vat dyes S
O O
C CO
C
C
NH
O O
Indegoid
Anthraquinoid Sulphurised
Vat dyes have excellent fastness properties when properly selected and are often used for
fabrics that will be subjected to severe washing and bleaching conditions (towelling,
industrial and military uniforms, etc.).
Vat dyes are normally insoluble in water, but they become water-soluble and substantive for
the fibre after reduction in alkaline conditions (vatting). They are then converted again to the
original insoluble form by oxidation and in this way they remain fixed into the fibre.
When applying vat dyes in batch processes the textile is dyed very rapidly and unevenly due
to the high affinity of the dye. Nevertheless, level dyeing can be achieved by:
· increase of the temperature under a controlled profile ("High Temperature" process and
"Semi-pigmention" method)
· impregnation of the textile with the dye as water-insoluble dispersion, followed by addition
of the reductive agent in a subsequent step (pre-pigmentation process).
In all cases, oxidation and after-treatment follow. After-treatment consists in washing the
material in a weakly alkaline bath with a detergent at boiling temperature.
Continuous processes are used almost exclusively for dyeing woven fabrics and to only a
small extent for knitwear. The most commonly applied continuous process is the pad-steam
process. The textile is padded with the aqueous dye dispersion in the presence of anti-migrant
(polyacrylates, alginates, etc.) and dispersing/wetting agents, if required. After drying, the
fabric is passed through a chemical padder, which contains the required amount of alkali and
reducing agent and is fed immediately to a steamer. The material is finally rinsed, oxidised
and soaped in an open-width washing machine.
A more rapid, one-step process is also possible ,but only for pastel to pale shades.
Voluminous open fabrics can be dyed according to a wet-steam process. Unlike the pad-
steam process, this process does not require intermediate drying before steaming.
Continous dyeing 83
· reducing agents: mainly sodium dithionite (hydrosulphite) and sulphoxylic acid derivatives
(Zn-sulphoxylate). The latter, in particular, is used when the pad-steam process is applied.
Sulphur-free organic reducing agents such as hydroxyacetone are also now available for
some applications
· salt
· dispersing agents: they are already present in the dye formulation and are further added in
the subsequent steps of the dyeing process
· levelling agents: they form adducts with the dye, thus retarding its absorption onto the fibre.
Continous dyeing 84
Vat dyes.
• 3. ROSE R RED 1
• 3. SCARLET GG RED 14
• 5. BLUE BC BLUE 6
• 5. NAVY DB BLUE -
• 6. BROWN BR BROWN 1
• 6. BROWN G BROWN -
• 6. BROWN GG BROWN -
• 6. BROWN RN BROWN 3
• 7. OLIVE R BLACK 27
Sulphur dyes
Sulphur dyes are used in piece dyeing (cellulose and cellulose-polyester blends), yarn dyeing
(sewing thread, warp yarn for denim fabric, yarn for coloured woven goods), dyeing of flock,
card sliver (wool-man-made fibres blends) [186, Ullmann's, 2000].
Like vat dyes, sulphur dyes are insoluble in water, and, under alkaline conditions, are
converted into the leuco-form, which is water-soluble and has a high affinity for the fibre.
After adsorption into the fibre the colourant is oxidised and converted to the original
insoluble state. The reducing agent, salts, alkali and unfixed dye are finally removed from the
fibre by rinsing and washing.
Mostly continuous dyeing methods are applied, although batch dyeing (in jigger, jet, and
winch beck) is also possible.
In continuous processes the material is impregnated with dye, reducing agent and wetting
agent through a one-bath or a two-bath procedure. With the one-bath procedure (pad-steam
process) the reducing agent and the dye are added at the same time. With the two-bath
procedure (pad-dry/pad-steam) the material is padded in the liquor containing the dye and the
wetting agent, while the reducing agent is applied, if necessary, in a second step, after
intermediate drying. The material is then submitted to air-free steaming. After that, rinsing,
oxidation and re-rinsing are carried out.
Because the exhaustion is not too high, it is possible to re-use dyeing baths in continuous
processes.
Chemicals and auxiliaries applied to the substrate during the dyeing process are:
· reducing agents: sodium sulphide, sodium hydrogensulphide and thiourea dioxide are the
most commonly employed (although their use has decreased over the past decade [281,
Belgium, 2002]). Binary systems made of glucose and sodium dithionite, hydroxyacetone
and glucose or formamidine sulphinic acid and glucose are also used as alternative reducing
agents .
· salt
· dispersing agents (they are necessary in the process steps in which the pigment has not yet
been reduced or has been re-formed by oxidation)
Dyeing with azoic colourants is a complex process which involves a number of delicate
steps:
· preparation of the naphtholate solution by the hot solution process (the naphthol is dissolved
by boiling with caustic soda) or by the cold solution process (the naphthol is solubilised with
alcohol or cellosolve, caustic soda and cold water). For certain naphthols the addition of
formaldehyde is also necessary to prevent the formation of free naphthol
· preparation of the diazotized base by reaction with sodium nitrite and hydrochloric acid
(this step can be avoided when using fast colour salts)
· formation of the azoic dye into the fibre, by passing the textile, previously impregnated with
the naphtholate solution, through a bath containing the diazotized base or the fast colour salt
(addition of buffering agents is necessary to control the pH, in order to increase the coupling
capacity)
· after-treatment by rinsing the material to remove the excess naphthol from the fibre.
Continous dyeing 87
Polyamide fibres
Polyamide fibres (PA 6 and PA 6,6) are easily dyed with various types of dyes. Due to their
hydrophobic characteristics, they can be dyed with disperse dyes (non-ionic), whereas thanks
to the presence of the groups NH-CO- and NH2- in the polymer chain, acid, basic, reactive
and 1:2 metal-complex dyes (ionic) can also be used. However, in practice acid levelling
dyes are increasingly used.
Disperse dyes
Disperse dyes used for polyamide fibres are mainly azo compounds and anthraquinones.
They are applied especially for lighter shades.
The material is dyed in acidic conditions (pH 5) by acetic acid. A dispersing agent is always
added to the liquor.
Acid dyes
As with acid dyeing of wool, with increasing dye affinity, the hydrophobic interaction in the
initial phase must be repressed to achieve uniform absorption. This means that for high-
affinity dyes the liquor must be sufficiently alkaline at the start and then slowly decreased to
optimise exhaustion. The level of acidity of the liquor is regulated either by dosing with acids
during dyeing or by adding acid-donors (e.g. ammonium sulphate, sodium pyrophosphate or
esters of organic acids) at the start of the process .Optimal exhaustion and uniform dyeing
can also be achieved by controlling the temperature profile.
Auxiliary agents (anionic, cationic, non-ionic surfactants) are normally used to improve the
levelling effect.
The wet-fastness of dyeing with acid dyes on polyamide fibres is often unsatisfactory. After-
treatment with syntans (synthetic tanning agents) is often necessary. The syntans are added to
the exhausted bath or to fresh liquor at pH 4.5 by formic or acetic acid. The material is
treated at 70 - 80 °C and is then rinsed.
Continous dyeing 88
Metal-complex dyes
Among 1:2 metal-complex dyes, molecules containing sulphonic groups are the most suitable
for polyamide fibres.
The absorption of the dye increases with decreasing pH. Dyeing conditions vary from weakly
acidic by addition of ammonium sulphate and acetic acid to neutral or moderately alkaline
for high-affinity dyes. For high-affinity dyes amphoteric or non-ionic levelling agents are
usually added.
Reactive
In principle, the reactive dyes used for wool are also suitable for polyamide. The dyeing
process is carried out in weakly acidic conditions (pH 4.5 - 5). The process is started at 20 -
45 °C and then temperature is increased near to boiling. Non-ionic surfactants and sodium
bicarbonate or ammonia are used in the after-treatment step.
Continous dyeing 89
Polyester fibres
Articles made of pure PES are dyed almost exclusively using batch dyeing techniques and
among these, dyeing under high-temperature conditions is the most commonly applied.
Dyeing polyester fibres under atmospheric conditions (below 100 °C) was also frequently
done in the past with the aid of carriers. Since these substances are ecologically harmful,
dyeing below 100 °C is no longer in use today for pure PES fibres, unless carrier-free
dyeable fibres are employed.
Concerning high-temperature dyeing, the process is usually carried out in acidic conditions
(pH 4 - 5) with addition of acetic acid under pressure at 125 - 135 °C. In these conditions
levelling agents are necessary to prevent excessively rapid absorption.
Provided that alkali-stable dyes are used, dyeing in alkaline medium (pH 9 - 9.5) is also
possible. This technique has been developed in order to counteract the migration and
deposition of oligomers typical of PES fibres.In fact, oligomeric components (cyclic trimers
of ethylene terephthalate are especially harmful) tend to migrate out of the fibre during
dyeing, thus forming with the dye agglomerates that can deposit on the textile or on the
dyeing equipment. To achieve level effects, ethoxylated products are used as levelling
agents.
The thermosol process is another applied technique, although it is primarily used for
PES/cellulose blends. The dye is padded on the textile together with an anti-migration agent.
A drying step at 100 - 140 °C is carried out. Then the dye is fixed (200 - 225 °C for 12 -
25 seconds).
For light shades, the material needs only to be rinsed or soaped after dyeing. For dark shades,
in order to ensure high light fastness, an after-clearing step is normally necessary. This
usually consists of an alkaline reductive treatment followed by post-rinsing in weakly acidic
conditions.
PES fibres can be dyed with cationic dyestuffs, provided that acidic components (e.g.
sulphated aromatic polycarboxylic acid) are used as co-monomers during the manufacturing
of the fibre (creation of anionic sites).
Continous dyeing 90
Acrylic fibres
So called PAC fibres are hydrophobic and contain anionic groups in the molecule. As a
result, they can be dyed with disperse and cationic dyes. With the introduction of cationic co-
monomers in the polymer, the fibre can also be dyed with acid dyes.
Batch dyeing is commonly applied for cable or stock (package dyeing), yarn in hank form or
packages and for fabric. Piece dyeing can be performed on beam, overflow, paddle (for
knitwear, ready-made bath sets), or drum (socks).
Stock, cable and top can be also dyed on special machine, using the pad-steam process,
preferably with pressurised steam to obtain short fixing times. Piece goods, especially
upholstery material (velour), are also dyed according to the pad-steam process, but in this
case fixing is carried out with saturated steam. This implies longer fixing times, which means
that rapidly diffusing cationic dyes and dye solvents are required.
Disperse dyes
Disperse dyes are used to produce light to medium-deep shades. The dyeing techniques
correspond to those used on polyester fibres. However, dyeing can be performed at
temperatures <100 °C without carriers. Furthermore, due to the good migration properties of
disperse dyes, levelling agents are not required.
Continous dyeing 91
Cationic dyes
Typical recipes used in batch dyeing include an electrolyte (sodium acetate or sodium
sulphate), acetic acid, a non-ionic dispersant and a retarding agent. Dyeing is conducted by
controlling the temperature in the optimum range for the treated fibre. Finally the bath is
cooled down and the material is rinsed and submitted to after-treatment.
· pad-steam process (fixation with saturated steam at 100 - 102 °C) - this process requires a
longer fixing time. Rapidly diffusing cationic dyes and dye solvents, which exhibit a carrier
effect, are required.
When dyeing with basic dyes, special levelling agents (also called retarding agents) are
widely used to control the absorption rate of the colourant on the fibre, thus improving level
dyeing.
Summary of the most common dyestuffs and dyeing techniques for polyacrylic fibres
Continous dyeing 92
In contrast to the other regenerated cellulose fibres, CA and CT are hydrophobic and
therefore they can be dyed with disperse dyes under conditions which are very similar to
those applying to PES fibres.
Cellulose acetate is dyed by the exhaustion method with disperse dyes in the presence of
non-ionic or anionic dispersing agents in weakly acidic conditions (pH 5 - 6). Dyeing is
normally done at 80 - 85 °C. However, a series of less wetfast dyes already absorb onto the
fibre at 50 - 60 °C, whereas more wetfast dyes require temperatures up to 90 °C.
Compared to CA, CT dyeing and finishing characteristics are more similar to purely
synthetic fibres. CT, like CA, is dyed with disperse dyes in a weakly acidic medium in the
presence of levelling auxiliaries. Applied dyeing techniques for CT are:
· batch dyeing process, usually at 120 °C, but if these conditions are not possible a dyeing
accelerant (based on butyl benzoate or butyl salicylate) is required
· thermosol process.
· fibres of different types in the form of staple fibres are mixed at the yarn manufacturing
stage, during spinning
· fibres of different types are separately spun and the resulting yarns are wound together to
give a mixed yarn
· fibres of different types are separately spun and combined together only at the weaving
stage where one or more fibre yarns are used as warp and the other ones as weft.
Dyeing of blend fibres is always longer and more difficult as an operation compared to pure
fibre dyeing. Despite these disadvantages, dyeing tends to be placed as close as possible
towards the end of the finishing process. In fact this enables the dyer to satisfy the requests of
the market without the need to store large amounts of material already dyed in flock or yarn
form in all available shades.
Continous dyeing 93
· the two fibres are dyed in the same tone ("tone on tone") or in two different shades using the
same dyes
· only one fibre is dyed (the colourant is not absorbed by the other ones)
For "tone on tone" dyeing, it is sometimes possible to use the same dye for the different
fibres. When dyes of different classes have to be employed, the dyeing process is easier to
control when the selected colourants have affinity only for one fibre and not for the other
one. In reality, however, this situation is exceptional and the dyeing of fibre blends remains a
complex operation.
Blend fibres dyeing can be done in batch, semi-continuous and continuous processes. Batch
processes include:
· dyeing in one bath and one step (all dyes are added in the same bath in one single step)
· dyeing in one bath and in two steps (dyes are added to the same bath in subsequent steps)
· dyeing in two baths (dyes are applied in two steps in two different baths).
The most common fibre blends will be discussed in the following sections.
Polyester-cellulose blends
A large part of the entire production of PES (ca. 45 %) is used to make this mixture.
Polyester-cellulose blends are used for all types of clothing and for bed linen. The cellulose
component is usually cotton, but viscose staple fibres and occasionally linen are also used.
The preferred mixing ratio is 67:33 PES: cellulose (for textiles worn close to the skin), 50:50
and 20:80 [186, Ullmann's, 2000].
In dyeing PES-cellulose mixtures, disperse dyes are used for the polyester component, while
the cellulose portion is usually dyed with reactive, vat and direct dyes. Pigment dyeing is also
commonly used for light shades.
Disperse dyes stain cellulose fibres only slightly and they can easily be removed by
subsequent washing or, if necessary, by reductive aftertreatment. Most of the dyes used for
cellulose stain PES only slightly or not at all.
Continous dyeing 94
PES-cellulose blends are commonly dyed in continuous processes. Nevertheless, for yarn and
knitwear, batch dyeing is of major importance.
In batch dyeing, the application of dyes can be done in one or two steps in one bath or in two
different baths in subsequent stages. The disperse dye is generally applied at high-
temperature (HT) conditions without the use of carriers.
In the one-bath/ one-step procedure, special auxiliaries, so-called acid donors, are used,
which lower the pH when the temperature is increased. In this way, it is possible to fix the
reactive dyes in alkaline conditions and then reach the optimal dyeing conditions (pH 5 - 6)
for disperse dyes by increasing the temperature. Alternatively, it is advantageous to operate
at pH 8 - 10 using alkali-stable disperse dyestuffs, which also avoid oligomer problems.
The one-bath/ one-step procedures are preferred, being more economic, but present more
difficulties. For example, the presence of salt increases the tendency of disperse dyes to stain
the cotton fibre of the blend. Recently developed low-salt reactive dyes are claimed to show
good performance and high reproducibility in this application.
In continuous processes the dyes are usually applied in one bath. The fabric is subsequently
dried and disperse dye is fixed to the PES component by the thermosol process. Afterwards,
the second dye is developed according to the procedure typical of each class, using in general
pad-steam, pad-jig or pad-batch processes. Dyes are applied according to application
conditions typical of their class. For more details regarding a given class of colourant, see the
specific section.
Continous dyeing 95
W = woven fabric
K = knitted fabric
(1)
Pigment dyeing includes padding with the pigment, a binder and auxiliaries, drying and
polymerisation at 140 °C for 5 min.
Polyester-wool blends
Polyester-wool blends are widely used, especially for woven goods and knitwear. The most
frequently found ratio is 55:45 PES: wool.
Wool cannot be dyed at the high temperatures typical of the HT dyeing process for PES
fibres and PES-cellulose blends. The dyeing time should also be as short as possible so that
the wool is not damaged. For large productions it is therefore preferable to dye wool and PES
separately in top, blending the two fibres at the yarn manufacturing stage. However, quick
changes in fashion and short-term planning frequently do not allow separate dyeing.
When dyeing polyester-wool blends, disperse dyes are used for polyester and anionic (acid
and metal-complex dyes) for wool.
Only disperse dyes that stain wool as slightly as possible or are easily removed by washing
can be used for dyeing wool-polyester blends. Disperse dyes, in fact, tend to stain wool and a
reductive after-treatment is not always possible (appropriately stable dyes are required).
Continous dyeing 96
PES-wool blends are typically dyed according to the following batch processes:
· at 110 - 120 °C with the addition of formaldehyde as a wool protective agent and with low
amounts of carriers or none at all (HT conditions).
The one-bath process method is preferred in practice; the two-bath process is applied when
deep shades and high fastness are required. The material is first dyed with disperse dyes. A
reductive intermediate treatment may be applied before dyeing the wool part. In both dyeing
methods, after dyeing, an after-treatment is applied to remove any disperse dye attached to
the wool, if the dye used for wool can withstand it. The material is treated with ethoxylated
fatty amine in weakly acid liquor at 60 °C.
Polyamide-cellulose blends
Since PA fibres have an affinity for almost all dyes used for cellulose, different possibilities
are available for dyeing this blend:
· reactive dyes.
Application conditions are those typical of each class of dye. They have already been
described in the specific sections.
Polyamide-wool blends
Blends with polyamide/ wool ratios varying from 20:80 to 60:40 are used. This blend is
particularly important in the carpet sector. More detailed information is therefore reported in
the specific section dedicated to this sector (see Section 2.14.5).
As general information about the dyeing processes suitable for this type of blend, both fibres
have affinity for acid and 1:2 metal-complex dyes. However, since PA is more accessible to
the dye than wool, it is dyed more deeply, particularly in the case of light colours. To
counteract this effect, special levelling agents (also called PA reserving/ blocking agents) are
used (mainly aromatic sulphonates). These auxiliaries have a relatively high affinity for the
PA fibre and retard the absorption of the colourant on this part of the blend.
Dyeing is performed in the presence of acetic acid and sodium sulphate. Due to limited
fastness of acid dyes, 1:2 metal-complex dyes are required for dark shades [186, Ullmann's,
2000].
Continous dyeing 97
Acrylic-cellulose blends
PAC-cellulose blends are used for household textiles (drapery and table linen) and imitation
fur ("peluche", in which the pile consists of PAC fibres and the back is made of cotton). The
percentage of PAC in the mixtures varies between 30 and 80 %.
PAC can be dyed with cationic or disperse dyes, while direct, vat or reactive dyes can be
used for the cellulose component.
The following methods are the most commonly used for dyeing this blend:
· continuous dyeing with cationic and direct dyes according to the pad-steam process (to
avoid precipitation of cationic and anionic dyes present in the pad liquor at relatively high
concentration, combination of anionic and non-ionic surfactants are added to the solution)
· batch dyeing (usually according to the one-bath, two-steps method) with cationic and vat
dyes or with cationic and reactive dyes.
Acrylic-wool blends
Among synthetic fibres, PAC fibres are the most suitable for obtaining blends with wool that
keep a wool-like character. This makes this blend widely used, especially for knitwear and
household textiles. The blending ratio of PAC to wool varies from 20:80 to 80:20.
Metal-complex, acid and reactive dyes are the dyestuffs typically used for the wool part,
while PAC is dyed with cationic dyes.
Cationic dyes stain wool fibre. As a matter of fact cationic dyes attach first to wool and then
migrate to PAC fibre at higher temperature. Even if well-reserving dyes are selected, dyeing
must be conducted for a sufficiently long time (from 60 to 90 minutes) in order to obtain
good wool reserve [186, Ullmann's, 2000].
· one-bath one-step
· one-bath two-step
· two-bath.
The first one allows shorter dyeing times and lower consumption of water. However, it is not
always applicable because the simultaneous presence in the dye bath of anionic and cationic
Continous dyeing 98
compounds can produce the precipitation of the formed adducts on the fibre. Precipitation
can be prevented using dispersing agents and selecting adequate dyes.
When dyeing with the one-bath, two-step method the use of reserve agents is not necessary.
In fact, wool absorbs the cationic dye and slowly releases it, acting as a retarding agent
(exerting a retardant effect on PAC).
Continous dyeing 99
PROBLEMS IN DYEING
1. General Problems / Non Technical Problems
2. Process Dependent / Technical Problems
1-General Problems / Non Technical Problems: -
These problems occur due to wring
calculation, wrong recipe, not good stirring, tint and water marks etc.
Stains: -
o Due to aggregation
o Due to dirty machine
o Chemical and dye solution aggregation.
o Improper dye dissolution
o Non uniform dispersion
Tint: -
Tint occur due to dirty machine
2-Process Dependent / Technical Problems
CONTINUOUS METHOD: -
LISTING: -
This is (L.C.R) left centre right problem. Shade different from left to
right reason may be migration, uneven squeezing.
BACK FACE: -
I. Mechanical Problem: -
o I.R pre-drying not well
o Pick up should be 65%
o Should be control air circulation
Affinity Dyes
Depth Tailing
Non-affinity Dyes
Reactive dyes are affinity dyes and vat dyes are non-affinity dyes.
NOTR: -
Yellow more affinity then blue, yellow rush to fabric. There is more yellow
% age in solution. To avoid this same class of dye like Ramazol is use.
PENETRATION PROBLEM: -
For good penetration Moisture Content, pressure,
temperature, time should be same. If penetration is
good washing, rubbing and light fastness is good.
Normally (40 – 60 sec) 105Co is required. It is
controlled in steamer.
FIXATION FAILURE: -
o Not required chemical concentration if we get.
o Not proper temperature
In continous dyeing there are so many chemical and physical problems occurs during
continous dyeing. Continous dyeing is divided into following parts .Some of physical
problems are given in details in the following,
1. Padding process
2. the drying process
3. fixation process
4. washing process for unfixed dye particles
1-Padding process
In this process the fabric is passed from padder after passing through trough containing dyes
and chemicals. There are four rollers in the trough. There is one pair of squeezing roller.
Padder is shown as,
• Evenly dried fabric;uniform moisture over the length and width of the fabric .
• Uniformly cooled to room temperature to prevent increasing temperature in
padding solution.
• Pretreatments should be applied uniformly as singeing,desizing, scouring,
bleaching and mercerization.
• The fabric to be dyed should be free of creases , other wise the padding will
be un even.
• Adequate relaxation of fabric to be dyed in padding.
• In continous dyeing of woven textiles, the two nip and dip of padding has
practically no effect on improvement of penetration.
• The rubber squeeze rollers should be adjusted to the proper pick-up for
uniform pressure from side to side and side to center . in short it is called L-C-
R (left-center-right).
• Since the rollers are designed so that they exert uniform pressure on the
whole width of the fabric because this pressure usually vary from edges to
center. The special designed rollers are slightly different in diameter which
is technically called as crowning.
2-Drying process
The padded fabric should be immediately applied “drying” to satisfy the next fixation
treatment of the padded fabric.
Since dye stuffs have not yet fixed with the fibres in this process , the migration phenomenon
is occurred where by dyes tend to move along side
Moisture evaporating during drying not only from the in side of fabric to the surface but also
from center to the both sides.
Drying machines:
There are two drying machines that are used for drying purpose
• Hot flue dryer
• Infrared dryer
Hotflue dryers are generally work on jet system . hot air is fall uniformaly over the fabric
through jet. They are also called drying chambers their digram is shown as follows,
Where as infrared dryers are basically rays that across the fabric from both sides and it is
vary usefull in migration of the dye particles from the core to surface of the fibre. Although
they have no high efficiecy as the movement of the water particles over the fabric surface is
rather slow. The infrared dryers are shown as follows,
Continous dyeing 104
So for having high efficiency we use hot flue and infrared dryers
combined .
2- Phenomenon of migration:
Migration is the process by which a dye move around the fibre or level
itself. The migration process comprises adsorbtion of dye onto the fibre
sureface,migration through the dye liquor,re-adsorbtion onto the fibre structure.
Migration itself is also heavily influenced by temperature.
The phenomenon of dye migration on polyester/cellulose blended
fabric is classified into two phenomenon
1- The movement of dye particles to the surface of fibre during drying process.
2- The movement of individual dye molecules into the interior of fibre during
thermosoling process.
Relation b/w drying mechanism after padding of dye solution and phenomenon of
migration of dye molecules to the surface of the fabric is considered as follows.
First the water evaporates from the surface of the fabric by the thermal energy
from heat source and the water content decreases on the surface of the fabric.
The difference of water content b/e the surface of fabric and the interior causes
the water movement from the interior of the fabric to the surface by capillary
action.
The water begins to evaporates when reaching the surface but the dye particles
moving alongwith remain and accumulate on the surface.
Some of the vapors produce near the surface of fabric begin to evaporate as
result of the difference in vapor pressure.the rest of thje vapors move into the
interior of fabric and transmission of heat happens quickly inside of the fabric.
The vapors move into the interior of fabric are recondenced to liquid and move
again to the surface of fabric.
After consistant drying are repeated , the movement of water from the interior
of fabric to the surface eventually ends.
Air speed
In hot air drying, air speed provide the most prominent influence on the rate of
drying and simultaneously influences upon migration.
Continous dyeing 105
Temperature :
Humidity:
The most effective drying method generally follow this sequence , 20-30%
water of pick-up ratio of the padded fabric is generally dried by the radiation of infrared
rays.
Test method:
Two pieces of fabric sewn one over the other are padded with the dye padding
solution , sqeezed ,dried and developed.
The dyeing strength of the out side and inside of above dyeing are measured .
M= (K/S)0__________
[ (K/S)0 +(K/S)1] *1/2
(K/S)0 =dyeing strength of out side
(K/S)1=dyeing strength of inside.
Migration inhibitors:
The migration property of dyes is largely influenced by the
type of migration inhibitors and by the amount applied. As common migration inhibitors ,
sodium alginate and synthetic thickening type agents of venyl acetate or acrylic acid types
are used.
Of these migration inhibitors, synthetic thickening type agents
are inferior to sodium alginate in migration inhibiting effects but, on the other hand, they
generally show favorable results in appearance of dyeing because of their better adhesive
effect of dyes on polyester.
Fixation process:
The following processes are applied fro fixing disperse dyes on
polyester fibres,
1. Thermosol method
2. High pressure steaming method
3. High temperature (HT)steaming method
Thermosol method
This method , applying drying heating to fix disperse dyes on polyester
fibres,is generally used for fixation in continous dyeing of polyester /cellulosic blended
fabric.
For continous dyeing of polyester /cellulosic blends with disperse dyes and vat dyes.two
methods are usually adopted,
In two bath method ,disperse dyes are first applied on polyester fibre by
thermosol dyeing and then vat dyes are applied on cellulosic fibres in a separate process.
• Tailing :
The phenomina called tailing will vary depending upon the kinds of fibres
and substantivity, particle size and dispersibility of dyes.
On the good hydrophilic fibres like cellulosic fibres , water vis primarily
absorbed on fibres. As shown in the curve[1] of fig., the concentration of padding solution
increases as time elapses , and eventually reaches equilibrium at level of concentration about
20% higher than that of original padding solution. In contrast on hydrophobic fibres suchas
polyester, the hydrophobic dyes is absorbed primarily as shown in curve [2] , the
concentration of padding solution increases as time elapses , and eventually reaches
equilibrium at level of concentration about 20% higher than that of original padding solution
Pdding time
This behaviour to minimize tailing in blends, though depending upon blending ratio, may be
attributed to the mutual reaction between the hydrophobic of cellulosic fibres, and also to use
of thickening agent with a high degree of hydration as migration inhibitor in practical
padding solution.
• Speck:
The formation of speck during padding is largely influenced by particle of size of
dyes, the compatibility of these dyes with migration inhibitors and penetrating agents etc.
though depending upon the structure and density of woven fabric, the dye particle which will
be larger than 3 micron causes formation of specks in case of polyester / cellulosic blended
poplin fabric.
If dye dispersability caused by poor compatibility between dyes and auxilaries
remarkably deteriorates, it leads not only formation of specks on the fabric but also tailing
problem.further more , dispersion solution ar sometimes applied or stored for a longer time
after preparation untill padding finished, and dispersed dyes which stain the wall of pad
trough are dried and then drop back into the padding solution., the redispersibility of dyes is
one of the important factor for the formation of speck on fabric.
• Listing:
The phenomenon called listing refers to differences in color strength and shades
on the dyed fabrics as a result of unlevel dyeing from selvedge to selvedge and from
selvedge to center , the following are points reasoning the listing.
Uneven drying of fabric prepared from padding from selvedge to center to delvedge.
Uneven temperature of material.
Uneven pressure of squeezing.
Uneven temperature of padding solution.
Uneven feeding of padding solution.
proper amount of then is required depending on kinds of vat dyes and dyeing depth. When
formulation of chemical solution is not properly prepared and /or temperature of it increases.
The vat dyes padded on the fabric are liable to drop and thus lead to such problems as tailing
and high level dyeings.
The temperature of chemical bath should therefore
be kept in around 20C or preferably bellow 15C. Further more , it is possibly dangerous that
temperature of chemical solution in creases by excess steam of if the chemical tank is
mounted too close to the steamer. To avoid this risk ,therefore, the tank should be equipped
with cooling system.
The reduction and dyeing mechanism of vat dyes , behaviour of leuco salt and kinds of vat
dyes will be described in the following,
Continous dyeing 113
1-Basic reaction of reduction and dyeing of vat dyes are shown in the following table,
water
Vat dyes, in general, require a reduction potential between -650mv and -1,000mV to convert
into leuco acid. To reduce all kinds of vat dyes , a reducing agent which has a reduction
potential of lower than -1,000 mV is necessary . from this point of view hydrosulphite is the
most suitable reducing agent.
• Over reduction
• Hydrolysis
When temperature is too high or concentration of caustic soda is abnormally high, over
reduction is liable to occur.
Continous dyeing 114
• Dehalogination
In one bath process, both disperse and reactive dyes are padded in the same bath and
developed either together or separately onto the respective fibres. The former is called one
bath one step dyeing method and the later is called one bath two step dyeing method.
In two bath method ,disperse dyes and reactive dyes are applied onto polyester fibres and
cellulosic fibres respectively.
2We have studied the procedure of disperse dyes in last topic so now we will study about the
procedure and behavior of reactive dyes during continuous dyeing.
In continous dyeing , any sort of trouble during the process is liable to fail large volume of
fabric.
Various dyeing method are available for dyeing the cellulosic portion of polyester / cellulosic
blended fabricwith recative dyes but these common problems can be summarized by process
wise as given,
Process problems
Padding 1-Tailing
2-Listing
1-Dissolution of dyes:
Sumifix®, Sumifix® H, and Sumifix® supra dyesare generally made paste with a small
amount of hot water of 40C by kneading and then are dissolved adding hot water and stirring.
Disperse dyes, on the other hand , need to be dissolved and dispersed separately from
reactive dyes since dispersability is liable to to deteriorate by hot water, and eventually lead
to speck. When high concentration solution if reactive dyes are required , solubility can be
improved by addition of urea and dissolving agent.
Addition of urea not only influence solubility but also color yield of dyes.
2-Water to use :
Reactive dyes are generally effected by metallic ions existing in water to use , result in flate
shade. Soft water should be used for dyeing. However if water containing metallic ions is
obliged to be used.addition of 0.5-3g/l of sequestering agent is recommended.
As the presence of alkali in dye padding solution in one bath one step method is liable to
activate and hydrolyze the reactive dyes. The temperature of dye padding solution should be
kept at 20-25°C.
Since no alkali is added to one bath two step dyeing method Sumifix H dyes can be applied
in this process. More over as there is no need to consider influence of alkali for disperase
dyes during pad-dry-thermosol process.
In one bath one step method as well as one bath two step method, the stability of dyes might
possibly decrease either by adding auxiliaries in padding solution or the quality of water to
be used.
As the phenomenon of tailing has already been described In detail. Although various factors
affecting selective absorbtion of dyes are extremely complicated , the following factors might
be considered.
A-Dyes:
Affinity of dyes to fibre
Rate of penetration
Dye concentration
Continous dyeing
dyeing 118
B -fibres:
Kinds of fibres
Structure of weaving
Grade of pretreatment
Residual chemical
C- water to be used:
D- additives:
Urea
Thickner
Alkali
Salts
Penetrating agnets
E- padding conditions :
Immersing
Immersing temperature
Pick-up style of squeezing
Size of padding bath.
In comparison with other types of dyes,reactive dyes have a high hydrophilic property in
general and they are low affinity towards cellulosic fibres. Recative dyes have property to
migrate easily to the surface during drying. Further more ,as the surface of the fabrics are
liable to be dyed deeper whilst the inner part of the fabric become pale,it resulted in poor
dyeing due to the poor penetration and low quality of dye.
To avoid this a thickner like sodium algenate is added to the padding solution.
Continous dyeing 119
Conditions
Urea 50-100g/l
Migration inhibitors 0.5-1.0g/l
Penetrating agent 1-3ml/l
Sodium bicarbonate 10-20g/l
Padding 20-25°C
Pick-up 50-70%
Drying 110-130°C
Thermosoling 190-220°C
Time 60-120sec.
Washing open width soaper
Pad-steam
Conditions
Steaming 100-105°C
Time 20-30sec.2
Washing open width soaper
Continous dyeing 122
One bath two step pad thermosol alkali pad cold fix method
Conditions
Conditions
when fixation is carried out in a heating tank for 10-20 sec. at 95°C.
When fixation is carried out in the first and second boxes of open width soaper for 3-5 sec.
at 95°C.
Washing