Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
DESIGN SHEET
JOB NO. DESIGN BY REV. NO. DESCRIPTION DATE
Design of I-Shape Column Base Plate with Moment & Axial Compression.
Input Data:
Geometrical Data:
d ( Column Web Depth ) b ( Column Flange Width ) N ( Base Plate Length ) B ( Base Plate Width )
= = = = = = = = = =
335.6 335.6 480 480 45 31.1 31.1 562.64 0.87 2.45 41.19
Structural Data:
P ( Max. Compression Reaction ) M ( Max. Applied Moment ) F y ( Base Plate Yield Stress )
Check Eccentricity:
p(max) ( Concrete Bearing Strenght ) = 0.83 39.98 16.96 0.15 Kn/Cm2 Kn/Cm Cm Cm p(max) = 0.85 'c / c (c = 2.5), As per ACI 318-02
ecrit ( Critical Eccentricity Value ) ecrit = N/2 - P/2qmax e ( Actual Eccentricity Value ) = M / P
= =
e ecrit , Small Eccentricity Case There is no Tendency To Overturn. Anchor Rods are not Required for Moment Equilibrium.
Compute Y & T :
f =
Y= T= 20.89 Cm f = N/2-X1 Y = ( N - 2e ), When e ecrit. Y = ( f + N/2 ) - [( f + N/2 ) - 2P(e +f ) / qmax] ^ , When e > ecrit. T (Anchor Rod Tension) = qmax * Y - P , When e > ecrit.
Small Eccentricity Case
47.69 0.00
Cm Kn
t req. 1 =
t req. 1 = x SQRT(2*s*F p/F y ). (s = 1.67) , When Y . t req. 1 = SQRT(4*s*F p*Y*(- Y/2)/F y). (s = 1.67) , When Y < .
The Tension Force T in The Anchor Rods Will Cause Bending in The Base Plate. Cantilever Action is Conservatively assumed With The Span Length Equals to X.
N.A. N.A. 15
Kn.Cm / Cm mm mm
Mpl (Plate Bending Moment Per Unit Width) = T*X/B , When e > ecrit. t req. 2 = SQRT(4*s*Mpl/F y). (s = 1.67) , When e > ecrit .
(Minimum Required Base Plate Thickness) = The Larger of treq.1 & treq.2 OK, t
Fin.