Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
TRANSMISSION
SYSTEMS
BY:-
SUSMITA PANDA
CONTENTS
INTRODUCTION
WHAT IS THE NEED?
LIMITATIONS OF LARGE AC SYSTEMS.
ADVANTAGES of FACTS.
SERIES COMPENSATION
• Static Synchronous Series Compensator. (SSSC)
• Thyristor controlled series compensator. (TCSC)
• COMPARISON
PARALLEL COMPENSATION
• STATCOM
• SVC
• COMPARISON
COMBINED SHUNT AND SERIES CONNECTED
CONTROLLER.
SCCL with FACTS.
HVDC and FACTS.
INTRODUCTION
INTRODUCTION
The FACTS technology is a collection of controllers, which
can be applied individually or in coordination with others to
control one or more of the interrelated system parameters,
such as series impedance, shunt impedance, current,
voltage, and damping of oscillations.
GENERATIONS:-
• 1st Generation of FACTS (SVC & TCSC).
• 2nd Generation of FACTS (STATCOM & SSSC).
• 3rd Generation of FACTS (UPFC & IPFC).
What is the Need?
Thermal
For overhead line, thermal capability is a function of ambient
temperature, wind conditions, conditions of conductor, and ground
clearance.
The FACTS technology can help in making an effective used of
newfound line capability.
Dielectric
Being designed very conservatively, most lines can increase
operation voltage by 10% or even higher.
FACTS technology could be used to ensure acceptable over-
voltage and power flow conditions.
Stability
The stability issues that limit the transmission capability include:
transient stability, dynamic stability, steady-state stability,
frequency collapse. Voltage collapse, and sub-synchronous
resonance.
The FACTS technology can certainly be used to overcome any of
the stability limits.
LIMITATIONS OF LARGE AC
SYSTEMS
(LONG DISTANCE (INTERCONNECTED
TRANSMISSION SYSTEMS) SYSTEMS)
• Voltage stability • Load Flow Problems
• Reactive power problems (needs management of
• Steady state stability Congestion)
• Transient Stability • Voltage Stability
• Frequency Control
• Oscillation Stability
• Inter-Area Oscillations
ADVANTAGES of FACTS
Increase of Power Transfer without adding new
transmission lines.
Transmission Cost minimization.
Steady state and dynamic voltage control.
Improvement of System Stability and Voltage
quality.
Active damping of Oscillations.
BASIC TYPE OF FACTS
CONTROLLERS
Series controllers:
The series controller could be a variable impedance or a variable source
both are power electronics based. In principle, all series controllers inject
voltage in series with the line.
Shunt controllers:
The shunt controllers may be variable impedance connected to the line
voltage causes a variable current flow hence represents injection of current
into the line.
FACTS
SERIES- SERIES-
SERIES SHUNT
SERIES SHUNT
Used for
• Damping Oscillations.
• Voltage Stability Improvement.
STATIC SYNCHRONOUS SERIES
COMPENSATOR (SSSC)
STATIC SYNCHRONOUS SERIES
COMPENSATOR (SSSC)
THYRISTOR CONTROLLED
SERIES COMPENSATION(TCSC)
Series Capacitor banks installations protected by
thyristors.
BENEFITS
• Increased Power Transfer Capability.
• Improved Transient Stability.
• Lower Transmission Losses.
• Improved Grid voltage control.
OTHER APPLICATIONS
• Power Oscillation Damping.
• Sub-synchronous Resonance Mitigation.
• Transient Stability Mitigation.
THYRISTOR CONTROLLED
SERIES COMPENSATION(TCSC)
THYRISTOR CONTROLLED
SERIES COMPENSATION(TCSC)
COMPARISON
PARALLEL COMPENATION -
STATIC VAR COMPENSATOR(SVC)
Consists of fixed capacitor banks in parallel with
reactor bank.
BENEFITS
• Increased Power Transfer Capability.
• Improved Grid Voltage Control.
• Improved Power Factor.
OTHER APPLICTIONS
• Power Oscillation Damping.
• Power Quality (Flicker Mitigation, Voltage Balancing).
STATIC VAR
COMPENSATOR(SVC)
STATIC VAR
COMPENSATOR(SVC)
STATCOM-STATIC
COMPENSATOR
Same as SVC but its capacitive or inductive o/p
current can be controlled independent of system
voltage.
It can be based on Voltage sourced or Current
sourced Converter.
When inverter fundamental o/p voltage is higher
than the system line voltage, then STATCON acts
as a capacitor and reactive VARS are generated.
Otherwise, It acts as inductor and absorbs
reactive VARS from the system.
Can be designed to be an Active Filter to absorb
System harmonics.
STATCOM-STATIC
COMPENSATOR
STATCOM-STATIC
COMPENSATOR
STATCOM-STATIC
COMPENSATOR
BENEFITS
• Increased Power Transfer Capability.
• Improved Grid Voltage Stability.
• Improved Power Factor.
• Eliminated Flicker.
• Harmonic Filtering.
OTHER APPLICATIONS
• Power Quality ( Flicker Mitigation & Voltage Balancing).
COMPARISON
UNIFIED POWER FLOW
CONTROLLER (UPFC)
UNIFIED POWER FLOW
CONTROLLER
It is a Combined Series-Shunt Controller.
STATCOM and SSSC used for shunt and series
compensation respectively.
BENEFITS
• Increases Transmission line capacity (by
installing a series capacitor which reduces the
net series impedance) .
• Power System Oscillation Damping.
• Control of active and reactive power flow at
both sending- and receiving-end.
UNIFIED POWER FLOW
CONTROLLER-OPERATION
UNIFIED POWER FLOW
CONTROLLER-OPERATION
Reactive power is generated or absorbed by the
shunt inverter to control bus voltage.
Reactive power is generated or absorbed by the
series inverter to control the real and/or reactive
power flow on the transmission line.
A portion of the real power flow on the
transmission line is drawn from the bus by the
shunt inverter to charge the DC capacitor.
Real power is inserted into the line through the
series inverter.
SCCL (Short Circuit Current
Limitation) WITH FACTS.
REASONS OF SHORT CIRCUIT CURRENT
• Increasing Generation in high load density networks.
• Interconnection between systems.