Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Submitted By:
Mohd Arif khan
(arifkhan47@rediffmail.com)
CERTIFICATE
Manoj Kumar
Nitin Tekade
(External Guide) HOD - HR
Manager- Costing
2 Executive Summary
9 Sources of Data
10 Conclusion
11 Recommendation
12 Bibliography
I take this opportunity to express our sense of gratitude to all those who guided me and
helped me whenever the going seemed difficult and the road ahead was not visible.
I am highly thankful to Mr. P.K. Pandey, HOD(Costing) for giving me this opportunity to
enhance my knowledge. I am also thankful to Mr.Manoj Kumar Jha, Manager (Costing),
JSW, Tarapur, for assigning me to the projects which were truly enriching in nature and
scope. I am obliged and thankful to Mr. Nitin Tekade, HOD (HR), JSW, Tarapur who
made this training possible.
I am greatly indebted to Mr.Anil Sharma, DGM (CCL Plant), JSW Steel, for providing
me with an immense learning opportunity.
I would like to extend our gratitude to our guides Mr. T.J. Singh HOD (Packaging);
Mr.Praveen Mobian; Mr.Rahul Mahakal, Sr.Manager(CCL); Mr.Ravi Agarwal (CCL);
Mr. Dinesh Soni, Jr. Manager(Costing); Mr.Atul Tayade Asst. Manager(CCL); Mr.
Mahesh Bhonsle, Asst Manager(CCL); Mr. Sanjay Swami, Dy Manager (PPC) who were
with me through this entire journey. They inspired me to think beyond and to always look
for better solutions. I am deeply inspired by their profound thoughts, which took me to
light whenever the path became difficult.
I appreciate the help of Ms. Shweta Bhalekar, Jr. Manager (HR),JSW, Tarapur, who made
our stay a pleasant one and also provided us with all we needed and were always cordial
and helping.
Last but not the least, I wish to extend our thanks to all the staff of JSW, Tarapur, who
gave me great insight into the day to day operations of the plant.
EXECUTIVE SUMMARY
This report is the presentation of findings of the project work carried out during the
summer internship at JSW Steel Limited, Tarapur during the period of May’09-June’09.
A Project entitled “Analysis of Conversion Cost” was undertaken during this internship.
Overall study of JSW Tarapur and recommendations for cost optimization strategies were
studied. Broad study was done of the whole plant & later as a sampling CCL plant was
studied. The project involved the initial study of basic operations at this plant. The main
objective was to understand and analyze the prevailing conversion cost practices, their
effects and efficiency. It also intended to find the shortcomings and recommend solutions
for the same.
The various touch points were analyzed, and discussions were made with employees
responsible in these areas to understand the prevailing processes and areas of
improvement. Based on these recommendations, cost optimization strategies have been
made as part of this study.
The main products of the company are GI, GL, PPGI & PPGL. The project is mainly
about study of the costing of these products and analysis of the variable costs for cost
reduction by studying various cost elements involved.
The objective of project is Analysis of conversion cost of production & to find the area of
cost optimization that can be adopted by company.
JSW Group is one of the fastest growing business conglomerates with a strong presence
in the core economic sector. This Sajjan Jindal led enterprise has grown from a steel
rolling mill in 1982 to a multi business conglomerate worth Rs. 14700 Crore (US $
3.7billion).
As part of the US $ 10 billion O. P. Jindal Group, JSW Group has diversified interests in
Steel, Energy, Minerals and Mining, Aluminum, Infrastructure and Logistic, Cement and
Information Technology.
JSW Steel Limited is engaged primarily in manufacture of flat products viz. H R Coils,
CR Coils, Galvanized products, auto grade / white goods grade CRCA Steel and Power.
JSW Steel Limited has the largest galvanizing production capacity in the country and is
the largest exporter of galvanized products with presence in over 74 countries across five
continents.
On its road to growth and expansion, the Group is also conscious about its responsibility
towards environment and social development. Eco-efficiency is a matter of principle.
Preventive measures for damage to the environment are taken into account at the
planning stage of production and growth. JSW Foundation, an integral part of the Group,
is the CSR wing, with a vision to create socio economic difference in the fields of
Education, Health and Sports, Community Relationship/Propagation as well as Art,
Culture and Heritage.
Group Companies:
JSW's history can be traced back to 1982, when Jindal Group acquired Piramal Steel
Ltd., which operated a mini steel mill at Tarapur in Maharashtra. The Jindals, who had
wide experience in the steel industry, renamed it as Jindal Iron and Steel Co Ltd. (JISCO)
now known as JSW Steel Limited (Tarapur & Vasind Works)
In 1994, to achieve the vision of moving up the value chain and building a strong,
resilient company, JISCO promoted Jindal Vijayanagar Steel Ltd (JVSL) now known as
JSW Steel Limited (Upstream). Its plant is located at Toranagallu in the Bellary-Hospet
area of Karnataka, the heart of the high-grade iron ore belt, and spread over 3,700 acres
of land. It is just 340 kms from Bangalore, and well connected to Goa and Chennai ports.
India’s third largest steelmaker, JSW Steel Ltd. consists of the most modern, eco-friendly
steel plants with the latest technologies for both upstream & downstream processes. JSW
Steel Ltd. has received all the three certificates:
Facilities:
Vijayanagar Works
Vijayanagar Works is a fully integrated steel plant, located in Bellary district, 340 kms
from Bangalore. It is also well connected to Goa and Chennai ports. The plant is also
equipped with modern technologies to ensure international quality standards. It produces
products from iron ore pellets to hot and cold rolled flat products.
Vijayanagar Works was the first Greenfield project in the world to have Corex
technology to produce Hot Metal. By 2008, Vijayanagar Works will achieve 7 MTPA
status making it India's largest integrated steel plant at one location. By 2010, it will
further expand to 10 MTPA. This makes it among the fastest growing steel plants in the
world. It's eco-friendly approach has also led to the development of Vijayanagar into a
modern township. Enveloped by acres of greenery and maintained by JSW, Vijayanagar
is prospering by leaps and bounds. Be it education, career opportunity or women
empowerment, the Company's initiative has gone a long way in making Vijayanagar the
success that it is today.
It is here that all began. A new chapter was written in the history of Indian Steel Industry
when JSW made its foray at Vasind in 1982 and setup a 20 Hi CR mill. JSW then
acquired a mini steel mill, which moved on to become JSW Steel Ltd.
Apart from being a leading manufacturer of cold rolled and color coated steel, Tarapur
and Vasind works is today India’s biggest producer & largest exporter of galvanized steel.
At Vasind Works, the Company has recently launched GALVALUME, a revolutionary
product in the steel industry. Its strategic location, with access to the major ports of
Mumbai, markets and raw material sources has worked to its advantage.
As JSW grew phenomenally, it also steered Tarapur and Vasind towards newer horizon of
prosperity. Apart from providing more jobs, JSW actively participates and organizes
various social and cultural activities to make lives richer. The region is now cleaner
happier and even more beautiful. Better health initiative, promotion of sports &
education are few of the development initiative that has gained in JSW presence.
Salem Works:
JSW Steel group acquired the Company and took over the Management from November
2004. Salem Works is the only integrated steel plant in Tamil Nadu and is located at
Pottaneri/M. Kalipatti villages and at about 35 kms from Salem. As part of the JSW Steel
group, the plant underwent a dramatic transformation and started making profits from the
first year onwards. A fast paced expansion plan has been drawn for the company to
quickly become the first 1 MTPA integrated steel plant in Tamil Nadu.
The plant is having facilities for production of Pig Iron, Steel, Billet and Rolled Steel
products in the long product category. The present capacity is being expanded to one
million tones per annum. It has adopted the Sinter plant – Blast furnace – Energy
Optimizing Furnace – Ladle Furnace, Vacuum Degassing Continuous Casting Machine –
bar and rod mill route with iron ore as the basic input material. It also has plants for
generation of power and production of oxygen.
Salem Works is highly environment conscious and the process and technology is
designed for reusing and recycling the process waste. We have an expanding green belt to
provide a green environment.
Products of Salem Works have the hallmark of quality and combined with competitive
pricing, they are highly preferred in automobile and construction sectors.
Galvanized Product:
Galvanized Corrugated Sheet, GP Sheet and Coil
Applications: Automobile, Boiler and Pressure Vessels, Ship Building, Railways,
Transmission Towers, Oil and Petrochemicals, Marine Containers, Coal and Mining,
General and Heavy Engineering.
New Initiatives:
JSW Shoppe
In an endeavor to expand retail base and ensure the easy available of quality and branded
steel in all its market, JSW Steel plans to setup 200 exclusive JSW Shoppes across the
length and breadth of the country by 2010. It has launched JSW Shoppe at Hubli and
Jaipur. Mr. Sajjan Jindal, vice chairman and managing director, JSW steel has
inaugurated two exclusive JSW Shoppe in Hubli, Karnataka on December 4, 2007 and
target is to open several more Shoppe in India.
The concept originated from the fact that the company wants the end consumer to get the
right quality of product at competitive prices at the right place. It will help in building
trust with the end user and provide them steel at their door-step.
All technical specification and details on manufacturing ranges are available in JSW
Shoppe. Information of all types of JSW steel product, ranging from HR coils to Color
Coated Steel and Long Products would help in enhancing the awareness on wide usage of
steel among cross section of society & industries.
At JSW Shoppe, end consumer will also know about different application of different
steel products being manufactured by M/s JSW Steel through actual components and
pictures from Automobile, White Goods Sectors, and Construction.
STEELeMARTS :
It has established for itself a reputation of being the most transparent, cost- effective and
interactive online steel trading portal and this is what sets STEELeMART apart from its
contemporaries. Everyday hundreds of steel users and traders across the country, trade on
STEELeMART to get the best deals on steel products.
STEELeMART cares for its customers and believes in continually evolving to provide
better services, which will enhance the experience of its customers while trading through
STEELeMART.
JSW, Tarapur
With an employee strength of more than 600 regular employees, Tarapur based unit of
JSW is crucial part of JSW steel empire. The Tarapur unit, has an annual sales turnover of
more than Rs. 4200 crore and is one of the Quality-conscious units of this conglomerate.
After slitting, the next step is “Pickling” of rolls. During transit and previous processing
underwent, surface of the rolls acquire some impurities and also gets oxidized, so they
are
treated with chemicals (HCl acid) to remove these impurities. Later these sheets are
rinsed, dried and oiled to avoid further surface impurities.
Next process in line is “Cold Rolling” of sheets. After initial uncoiling and welding, the
sheet is subjected to a pair of rotating rolls to reduce thickness of pickled sheets, and
achieve desired mechanical and metallurgical properties for the sheets. A sensitive
balance has to be obtained in terms of the sheet thickness, width and length and involves
a high precision work. The “Galvanizing process” takes place next and begins with the
uncoiling and welding of the coils to produce a continuous steel strip. This strip is then
cleaned and degreased in a continuous cleaning section. The strip next enters the heat
treatment furnace. It has an atmosphere of nitrogen and hydrogen to prevent oxidation of
the steel surface. Here the steel is subjected to a controlled heating and cooling cycle to
alter its physical properties. The zinc coating operation is performed by passing the steel
strip directly from the exit of the annealing furnace into a molten zinc bath of
“Color Coating” is the next activity in the processing cycle of the sheets and provides a
variety of color coated sheets. This is totally market driven initiative and is earning rich
dividends for the organization. A major application of these sheets is in consumer goods
industries. The coil is subjected to unwinding, pre-treatment and coating process before
being recoiled. This process here employs high grade green technologies and makes little
waste, usually burning solvents to provide energy for curing the paint. Various types of
paints can be used on the surface for different applications and properties i.e. polyester,
epoxy, pvdf, plastisol etc. The organic coating can be done on the cold rolled steel coils,
galvanized coils, galvalume and various grades of aluminium.
In today’s competitive world Corporate and businesses are struggling to maintain profits
and healthy bottom lines .Cost of production, fuel, raw material and human resources is
rising each year. These developments have prompted people to look for Cost
Optimisation Ideas & methods. Those who have opted for focused cost reduction
strategies have survived those who could not managed have perished .In recent economic
down turn it becomes more important to make Cost Optimisation program a major
initiative in industry. Companies are finding it difficult to retain people and are lying off
people, which is unprecedented in recent history of industrial recession. Companies have
to develop its own cost reduction program for savings without cutting jobs.
It gives us rapid turnover & thus decrease the amount of money tied in materials. The
major problem with just-in-time operation is that it leaves the supplier & downstream
consumers open to supply shocks & large supply or demand changes.
Following are the list of raw materials used in Galvanizing & Color-coating Line of
JSW: ---
a) HR/ CR COILS :
It contributes about 64% of the total conversion cost. So the company must try
to find out different alternatives through which they can reduce the cost of their raw
materials.
Present Supplier: In Tarapur plant of JSW, the HR/CR coils are brought down
from Bellary plant of JSW.
Company processes the HR coils which are bought from Bellary plant of Jindal, by
passing it through various stages and converting it into CR coils which are used in
further stages of production.
If the company plans to buy the HR coils from outside rather than its own company
then it would NOT get HR coils at lower price than its own company. Also the
company buys the HR coils at the market value from Bellary plant, as it cannot
negotiate with them. An outside company will always want some surplus, additional
profit if it is selling its product to other company. But while dealing with outside
companies, it can negotiate well to bring down the prices with its good negotiating
skills.
Cold Rolling department is completely dependent on the raw materials in the form
of HR coils as supplied by Slitting and pickling lines. As the stock level of HR coils is
maintained at a very low level, this plant has to be closed often, whenever HR coils are
not available. So, company must plan to built some inventory for maintaining sufficient
stock of HR coils so that there is no stoppage in other lines due to raw material
shortage.
Buying coils from your own sub-branches is beneficial as they are aware of the quality
of products required at their own organization. The sources of raw materials are
The policies of Governments, both Central and State, should be transparent so that
renewal or re-allotments of existing mining leases of primary raw materials like iron
ore and coal can be made without any problem. The grants of some of the new mining
leases are essential for making investment and expansion of some of the mines for new
projects or capacity enhancements (example, Posco). Alternative ways like plans to
enter into strategic investments/ tie-ups for coking coal blocks in India and abroad to
ensure assured supply of coking coal is a major hurdle to cross.
Zinc & alloys constitutes about 10 % of the total cost of conversion in Galvalume &
Galvanising plant. It has been estimated that corrosion costs about 4% of the GDP of an
industrial country’s economy. In Galvanizing industry the 45% of the conversion cost
involves the zinc consumption. The technique used in Tarapur plant of JSW is hot-
dipped galvanizing. The main zinc supplier for Tarapur branch is ‘Hindustan Zinc’.
So, the thickness of the zinc coating plays very important role in deciding the costs.
More the thickness more will be the cost of galvanizing. So, constant efforts must be
taken by company to develop new mechanism to reduce the zinc consumption.
Increasing the temperature of molten zinc can reduce the thickness of the zinc
coating. Also research was done to analyse the cost of other metals that can be used
for galvanizing. But it was found that cost of existing metals & alloys that provide
good corrosion resistance is very high when compared with zinc except some alloys
like terne made from tin & lead & NASSAC.
c) PAINT:
Paint constitutes about 50% of the total conversion cost in Colour Coating plant. Paint
is applied over Galvanized product as per the customer requirements.
In JSW, Primer, Top coat & Back coat are three important elements in Colour-coating
line.
Here, the colour-coating line applies about 5µ of primer coating on both the side of
GI/GL coils. Top coat is applied as per the customer requirements. Viscosity of paint is
Previously, company use to prefer Epoxy backcoat which consists of 35% volume
solid. Its main characteristic was that it offer good pufadhesion & its cost was also low.
But for a good back coat its volume solid % must be high enough, so company thought
of using Polyester or PU back coat. But polyester’s pufadhesion was low and PU’s
cost was high. So, a company named Akzo nobel developed an intermediate product
which contains combination of above 3 back Coats having good volume solid
percentage, good pufadhesion & reduced cost.
Company at present keeps only 10-15 days inventory of paints. It has tied-up contract
for 50 shades with suppliers so as to meet its demand. Time procurement plays very
important role in deciding cost & continuity in process can be maintained only if there
is proper supply of raw materials from suppliers. They also sometimes make use of
tinters which are mixed with excess stock & old stock in inventory to make new
shades. Hence, stock which would have contributed to waste is actually converted into
useful product and thus this recycled product can be used for colour-coating on coils. In
this way, these processes help in reducing the cost.
Recommendations:
Company can go for setting up their own ‘Mixing Stations’ beside their Color-coating
section, so that they can meet their paint requirements easily without any delay. In
mixing station they can prepare their own colours so that they can reduce their
procurement time & cost as well as save their transportation cost.
But after feasibility study we found that setting up our own big mixing station won’t be
beneficial as we are not into paint business. The company will have to incur additional
cost for procurement of raw materials for making of paints. But our main business is
Steel so we cannot indulge our manpower & other resources in paint business. Also the
The thickness of the colour coat has to be reduced. The thickness of the top coat must
be minimum but satisfying the customer specification. Even if we are able to reduce the
coating by 1µ then we could save lakhs of rupees.
In Colour coating business, product rejections are mainly due to change in colour
shades. These colour changes occur due to variation in temperature of primer & top coat.
The cooking process of primer & top coat must be carefully controlled by maintaining
proper temperature in furnaces. The thickness & colour of primer also plays very
important role in defining the shade of top coat on GI coils. The quantity & price of the
paint vary with their quality.
2. FUEL:
Fuel contributes about 1% of the total conversion cost. Basic manufacturing industry
consumes fuel in large quantum. Fuels also make large part of cost of production hence
any cost reduction strategies would have significant impact.
3. Nozzles sizes
Present fuel: Fuel used in plant is LPG for producing heat in furnace & many other
applications.
Natural gas is much cheaper than LPG. But the calorific value of the fuels play
important role in deciding the cost of the fuel. At ambient temperatures it remains in
gaseous form; however, it can be compressed (CNG) under high pressure to make it
convenient for use in other applications or liquefied (LNG) under extremely cold
temperatures (-260°F) to facilitate efficient transportation of the gas.
But consumption of CNG will be 3 times more than the consumption of LPG for the
same heating required.
Liquefied natural gas (LNG) takes up only 1/600th of the space that natural gas would
in its gaseous state and thus can be stored and transported more efficiently.
Essar steels and Bhushan Steel co are presently using LNG.
Corex gas is used in Bellary plant of Jindal but it is one of the by-products over there so
easily available to them & hence it is cheaper substitute for them. So availability cost of
fuel and its calorific value must be considered before selection of fuel.
Fuel consumption also depends upon the type of the burners used. Weishaupt burners
& Benetone burners can be used. Burner’s efficiency results in low fuel consumption.
3. POWER:
Power contributes around 2% of the total production cost. All manufacturing industry
consumes power or other energy sources for its production activities. Major source of
power consumption are production equipment like furnaces, ovens, prime movers, air
compressors, HVAC, cooling towers, lightning etc.
In a Captive power plant, company uses 50% of the power generated for its own use &
the rest 50% is sold to MSEB. The company has to pay double the amount paid by
domestic holdings. So, the company will be benefiting a lot with its own Captive power
Stores and Spares contribute about 2 % in total cost of production. Stores include the
raw materials that will be required in future. It is not always good to keep lot of stock
with you. For proper store management, forecast of the production must be accurate.
Higher amount of materials in stores, then higher will be our carrying cost.
Spares include maintenance of machinery. Proper care of the machinery must be taken
in order to prevent any sudden breakdown, which may abruptly affect the production
line. Alertness among the employees will help to reduce the cost of Stores and Spares.
In Tarapur JSW branch, ABC method of Stores control is followed. The classification
of the items into the categories A, B and C is made on the basis of such factors as their
value of consumption, investment value, or sales or profit potential. Thus, here with
minimum of effort, control is exercised over the items of comparatively high
importance. Proper forecast of the stores must be done based on production. Thus,
forecast must be accurate of the production.
Stores & spares department here follows Zero movement Inventory process at the end
of each month. Through this study they try to find out those items in inventory that
have not been moved i.e. there is no issue or dispatch of that item. They prepare the
Study of critical items is done and buffer stock is maintained for critical items. Here
they have their inventory period of 30 days. Some of the raw materials such as Zinc &
HR/CR coils follow just-in-time approach. They have mainly 3-4 days inventory, while
for paints a proper lead-time is planned.
According to me, Cost reduction strategy that can be followed in Stores & spares is –
Standardization of equipments, reduction of lead-time in inventory & procurement time
must be realistic. Standardization of equipments would help to reduce the spares for
machinery. Periodic verification of the stores must be done. Mostly this is done once a
year. Periodic stocktaking usually necessitates the shut down of the factory, and it
should therefore be completed as soon as possible. Therefore, company plans
indentation plan. Wastage should be reviewed in detail.
5. PROCESS LOSS:
Process Loss constitutes about 3% in CCL plant. There are various reasons for Process
loss. Process loss may be due to breakdowns, line stoppages, repetitive works on
production line which consume time & money, human error, inefficient working of some
machinery parts, some defects or delays in raw materials, etc…….
Process loss can be minimized by reducing the arising’s percentage and increasing the
yield. Also steps must be taken to reduce the breakdowns. Mainly process losses are due
As, thickness and width of coils change, many changes have to be brought in into the
systems parameters. But the machines are designed in such a way that abrupt changes in
thickness and widths will not give satisfactory results. Hence, it has to be done in stages
to ensure necessary quality levels. So, ideally the planning of coils must be done
carefully so as to reduce the wastage in the form of dummy coils. Dummy coils are used
to assimilate the systems to the new thickness and width parameters.
6. PACKAGING :
Responsibility for coil quality does not end at the mill. Quality at final point of delivery
is dependent on the protection afforded by the coil packaging. Increasing demands for
suitable packaging for coil stock led to a new approach to protect coils during
transportation and at their final destination. Storage at destination is one aspect which
determines the type of packaging. However, there are still no commonly used standards
on how such packaging should look.
Starting from the strapping machines, whether manual or fully automatic, a variety of
packaging systems are available. Some of the packaging materials that are used here are
GP sheet, OD ring GP, ID ring HR, straps, wood for providing support at base etc. Most
In JSW, they follow floating budget for packaging cost. This floating budget depends on
coil weight. As the coil weight decreases by 25% its packing cost budget increases by 10-
15%. Saving potential is shown in data & analysis section.
There are two main finished goods produced at this plant, namely GI (Galvanized Steel)
and PPGI (color coated steel) rolls. Following are the sales channels through which these
products are sold in the market, namely:
a) Trade
b) OEM
c) Export
Particular
Avg. PPGI Thick X Width X Coating
(A) Raw Material Cost
Paint
5000
Sub-Total(A)
(B) Operating Cost(Variable Cost)
1.Process Loss
400
2.Stores And Spares
350
3.Fuel
574
4.Power
250
Sub Total(B)
(C) Fixed Cost
1.Other Mfg Overheads
62
2.Personal Expenses
600
3.Factory/Admin.overheads
200
Sub Total(C)
(D) Operating Cost
Above format has been obtained from costing department, which is applicable as on
31.05.2009. The same format has been used for study of all the Six months under
consideration of current analysis.
To understand the problem areas, and the consumption of raw materials & Contribution
of each cost elements in total cost of production in CCL plant the following data of past
six months has been collected from different departments. From the six months data, the
deviations in cost of various factors like paint, Power, fuel, packaging, process loss
which are responsible for total conversion cost of production have been represented
through following data.
CCL-1 Table: 1
Months Avg Production Paint Paintcost Paint Consumption
thickness Litres/Mt. (Rs./Mt.) in lts.
Oct-08 0.277 302 44 6483 13160
Nov-08 0.38 791 28 4954 12861
Dec-08 0.29 705 35.94 5701 26088
Jan-09 0.209 62 48 7137 2985
Following graph illustrates the variation in Avg. thickness & Production month-wise:
Fig - 1
6000
5000
4000
3000
Avg. thickness
2000 Production in MT
/M
T d
tin
uP
ro
c
1000
0
0.277 0.38 0.29 0.209 0.37 0.332
MonthwiseAvg.thickness(mm)
EXAMPLE:
Thickness of coils DFT (Microns)
10 18 25
0.25 mm 11.08 19.94 27.69
o.50 mm 5.54s 9.97 13.85
0.75 mm 3.69 6.65 9.23
Reasons:
1. As the thickness decreases, the revolution of coils increases and so the paint
consumption increases. Increase in paint consumption may also be due to low
volume solid percentage in paints.
1. In Jan ’09, the back coat consumption is not varying in proper proportion with
other paint.
Reasons:
1. Increased production resulted in lower paint consumption per metric tonne
because of
increase in Avg. thickness of GI/GL coils.
E.g.-
2. Variation in back coat consumption is due to increase in production in Jan 2009 &
increase in its coating thickness from 10 µ to 12 µ.
Paint Calculation:
X = 1000 / (7.85*GP thick)
Y= Vol. Solid* 10/DFT
Constant Density GP THICK
X 1000 7.85 0.35 364
Lit / Ton
Z=X/Y 15.824663
DFT
Gauge 10.00 11.00 12.00 13.00 14.00 15.00 16.00
0.25 11.08 12.18 13.29 14.40 15.51 16.62 17.72
0.30 9.23 10.15 11.08 12.00 12.92 13.85 14.77
0.35 7.91 8.70 9.49 10.29 11.08 11.87 12.66
0.40 6.92 7.62 8.31 9.00 9.69 10.38 11.08
From the above table it is clear that by saving one micron coating we can save
approximately 0. 9 to 1 litre paint per metric tonne. Avg. cost of paint presently is Rs.166.
Reasons:
1. The thickness of the coil is inversely proportional to the length of the coil and the
length of the coil is directly proportional to the power consumption.
2. The line speed is directly proportional to the production rate, which directly
affects power consumption per metric tonne.
3. Power consumption is very high in CCL-1in one of the month, due to low
production which affects the continuity in line.
PROCESS LOSS :
CCL – 1 table : 1.5 CCL - 2 table : 2.5
Month Yield Production Proces
s % s Loss
Oct-08 96% 302 4%
Nov-08 96% 791 4%
Dec-08 90% 705 10%
Jan-09 80% 62 20%
Feb-09 94% 1637 6%
Mar-09 95% 5088 5%
Month Yield Producti Proces
s % on s
Loss
Oct-08 95% 6600 5%
Nov-08 96% 6557 4%
Dec-08 96% 6435 4%
Jan-09 96% 6992 4%
Feb-09 95% 5959 5%
Mar-09 95% 6150 5%
Interpretation:
1. From the above data it can be seen that the process loss is more case ‘Trade’ &
‘OEM’ as compare to ‘Export’.
Reasons:
1. In case of OEM, there is more process loss due to quality constraint involved with
customers & in Trade, the customer requirements vary frequently for more and
more reduced thickness of coil so there is more process loss in attending the
same.
2. Process loss also occurs when there is no line continuity and when adjusting
production line according to production.
Interpretation :
1. From the Trend analysis, it can be observed that Budgeted packaging costs for
OEM & Export Coils are more than Trade coils.
2. Also actual packing cost per metric tonne is always well below the budgeted
cost/MT.
3. Packing cost varies with the change in Avg. Coil weight.
Reasons :
1. Packing costs are high in OEM due to high quality constraints. Export coils also
need very good packing due rough handling during transportation. In trade coils,
metal packaging is not needed sometimes, so the packaging cost is automatically
reduced.
1. Presently company uses steel strap having dimensions 0.64 x 31.75 mm from
ITW suppliers. Another Supplier named FROMM packaging systems is ready
to offer straps having dimensions 0.79 x 25.40 mm.
Monthly requirement of company is 25000 kgs. of straps.
So, with ITW 6.289 mtrs/Kgs strap is required. Therefore total requirement
for whole month goes to 157232 mtrs/month.
With FROMM packaging suppliers, 6.35 mtrs/kgs strap is required. Therefore
total requirement for whole month goes to 158750 mtrs/month.
So, Savings is 1517 mtrs = 239 kg/month
Rate of strap is Rs. 52/Kg
Therefore, total savings is Rs. 12428/ month.
So, annually, total savings can be Rs. 149136.
Sources of Data
Sources of data are mainly secondary. The data is collected from internal sources of
company through direct interactions with the concerned persons. Some of the data was
collected through Internet. Sampling method is used for study by studying the conversion
cost in CCL through past six monts data and based on this analysis have been carried out.
12. The average cost of production/tonne has reduced over the years and the
productivity of labor has increased substantially over the years. This has
primarily been due to the deployment of latest technology in their
processes and in order for this trend to continue, it needs to sustain investment in
this domain.
Bibliography / Referances
Websites:
1. www.steelbb.com
2. www.steelonthenet.com
3. www.shumaonline\costreductionstrategies.com
4. www.energysavings.com
5. www.google.com