Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
0 Testing
Release
HP Application Lifecycle Management enables you to organize and track your upcoming releases by defining releases and cycles. a. A release represents a group of changes in one or more applications that will be available for distribution at the same time. Each release can contain a number of cycles b. A Cycle is a set of development and quality assurance efforts performed to achieve a common goal based on the release time line. Bothe releases and cycle have defined start and end dates.
Requirement Creation
Requirements are recorded in the Requirement module by creating the requirement tree. The tree includes different groups of requirements based either on requirement type or functional area . Creating the Requirement: 1. On the ALM Side bar under , under the Requirements, Select Requirement(Select Requirement Tree in the view menu) 2. To create a Requirement folder under Requirement root folder, select New folder 3. To create a Requirement right click on Requirement folder and select New Requirement
Note: For creating the requirement user must be a member of the group to whom the create requirements permissions are assigned (TDAdmin), user under viewer group couldnt able to create new requirements. Assigning Requirement to release To assign the Requirement to Release 1. Go to the Requirement module in HPALM and select Requirement 2. Right Click a Requirement and select Assign to Release 3. Select the requirement you want to assign from the tree and click on OK
4. To assign the requirement to Release cycle, right click a Requirement and select Assign to Cycle 5. Select the requirement cycle, you want to assign from the tree and click on OK
Verify Assigning Requirement to release 1. Go to the Management module in HPALM and select Releases 2. Drill down the Release 15.0, right click and select Show Requirements
3. This will take you to the Requirements module under requirements on the right pane you can see the requirement to which Release was assigned or you can directly able to trace the requirement to which the release was assigned
Creating Test Steps in QC ALM 11.0 1. 2. 3. 4. 5. In the test plan module select , view->Test Plan Tree and select a test Click the Design Steps tab If there are existing design steps, select the step below which you want to add a new step Click new step icon to add the step and expected result in the Design Step details dialog box. If there are existing design steps, select the step below which you want to call a template test and click on Call to Test icon
3. Right click on Folder under which you want to create a new test set and click New test set
4. Go the Execution Grid tab on the right pane and click Select Tests (You can select multiple Tests)
5. Add the test you want to run in the Execution Grid of the Test lab one by one
6. Select the Test case click the dropdown arrow next to the Run button and select Run with Manual Runner
7. Click on Begin Run select the value in the status column as pass if the test case passed or failed, N/A, No Run, Not Complete
8. Repeat the step 7 for all the test steps and update the actual result for each step and click on stop button to stop the run. 9. Repeat the steps from 5 to 8 for all test cases
Result
To display the result of the last test run for the selected test instance click on Test->Last Run Report
1. Select the Requirements under Requirements module 2. On the right pane select the Requirement for which you want to add coverage analysis 3. Under Direct Cover Status column, click on Not Covered link, the coverage analysis window will open
4. Click on Add Test Coverage link on the Coverage Analysis window, Test Coverage window will open
5. Click on Select Tests tab, test plan tree window will open inside test coverage window on the right
6. Add all the tests to the test coverage window, it shows the below coverage chart based on the number of test passed or failed
Defects
Defect Tracking Overview: Using the HP Application Life Cycle management defect module, you can report design flaws in your application and track data derived from defect records during all stages of the application management process. New Defect: To raise the new defect select Defect module, select Defect->New defect or Click on New Defect tab. New defect window will open
Fill New defect details Test phase, Defect Type, Detected in Release, Detected in Cycle etc To Attach the Document in New defect window, Click on Attachments link, browse the document you want to attach, click on Submit button To see your attached document in Defect module, select the defect and click on Attachment tab.
Behavior change in defect module in version (9.2 and 11.0) 1. Basic navigation and menus are same, but there is a change in the appearance of icons like refresh, defect details, Find similar defects,
In QCALM 11.0 New tab named Linked Entities is added in defect module Linked entities tab is used to list the defects and other entities linked to the currently selected defect.
Note: In QC ALM111.0 you can link the defect to Test Plan and Test Lab
To link the defect to Test Plan or Test Lab: Go to Test Plan or Test Lab module, select Linked defect tab, Select the icon link existing defect, now you can link the defect to test plan or test lab either by Id or selecting the defect you want to link from the list Now you can directly track the defect from you test plan or test lab module of QCALM11.0 Defect to Link window after you click on link defect by id or select button in Linked defect tab
To Configure the Auto mile for defect module Auto Mail ALM enables you to automatically notify users through email each time changes are made to specified defect field.
Steps to configure auto mail 1. 2. 3. 4. Click the auto mail link in the Project Customization window Select one or more fields for which you want to generate auto mail (Defect ID, Detected By etc) Check the check box for the user whom you want to send the auto mail Click on save