Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Manual:Password reset
RouterOS password can only be reset by reinstalling the router, or using the reset button (or jumper hole) in case the hardware is RouterBOARD. For X86 devices, only complete reinstall will clear the password, along with other configuration. For RouterBOARD devices, several methods exist, depending on our model.
Button reset
Most RouterBOARD devices are fitted with a reset button. Using: unplug the device power, hold the button, apply power and wait until the USER LED starts flashing. Now release the button to clear configuration. Note: If you wait until LED stops flashing, and only then release the button - this will instead launch Netinstall mode, to reinstall RouterOS.
Manual:Password reset
Manual:Password reset
Note: Don't forget to remove the jumper after configuration has been reset, or it will be reset every time you reboot.