Sei sulla pagina 1di 2

CASE

CASES OF ASME BOILER AND PRESSURE VESSEL CODE

2305-1

Approval Date: December 14, 2009 Code Cases will remain available for use until annulled by the applicable Standards Committee.

(10)

Case 2305-1 Exemption From Postweld NDE Requirements of UG-93(d)(4)(b) on Fig. UW-13.2(d) Construction Section VIII, Division 1 Inquiry: Under what conditions may vessels constructed to Fig. UW-13.2(d) be exempted from the postweld NDE requirements of UG-93(d)(4)(b)? Reply: It is the opinion of the Committee that vessels constructed to Fig. UW-13.2(d) may be exempted from

the postweld NDE requirements of UG-93(d)(4)(b) provided the following requirements are met: (a) ts shall not be thicker than 316 in. (b) The at plate pre-machined nominal thickness shall not be thicker than 112 in. (c) Materials for construction are limited to P-No. 1, Groups 1 and 2, and P-No. 8, Group 1. (d) This Case number shall be shown on the Manufacturers Data Report.

Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS

--```,,,`,`,````,,,``,``,`,`````-`-`,,`,,`,`,,`---

The Committees function is to establish rules of safety, relating only to pressure integrity, governing the construction of boilers, pressure vessels, transport tanks and nuclear components, and inservice inspection for pressure integrity of nuclear components and transport tanks, and to interpret these rules when questions arise regarding their intent. This Code does not address other safety issues relating to the construction of boilers, pressure vessels, transport tanks and nuclear components, and the inservice inspection of nuclear components and transport tanks. The user of the Code should refer to other pertinent codes, standards, laws, regulations or other relevant documents.

1 (2305-1)
Licensee=Larsen and Toubro Ltd Baroda/5954522003, User=Dhanaraj M, Francis Not for Resale, 07/24/2010 01:49:13 MDT

Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS

--```,,,`,`,````,,,``,``,`,`````-`-`,,`,,`,`,,`---

INTENTIONALLY LEFT BLANK

2 (2305-1)
Licensee=Larsen and Toubro Ltd Baroda/5954522003, User=Dhanaraj M, Francis Not for Resale, 07/24/2010 01:49:13 MDT

Potrebbero piacerti anche