Sei sulla pagina 1di 1

A I ndustrial ccessories ccessories

CERAMIC TERMINAL BLOCKS

Terminal Blocks

The terminal blocks, listed below, fit all Pyromation series 31, 34, 49, 63, 91 and 800 series connection heads. The terminal blocks are provided with a steatite ceramic base, brass terminal pieces, and stainless steel screws. These terminal blocks are not rated for high voltage use, but can be used in temperature sensor or low voltage Class 2 circuits. Series 341 and 342 terminal blocks accept up to an #8 gauge wire, and the series 343 accepts up to a #12 gauge wire.

2 3/16" 3/16" 1 1/2" 3/16"

2 1/8" 3/16" 1 1/2"

2 1/8"

1 1/2"

1 11/16"

1 11/16"

1 11/16"

Series 341
Terminal Blocks

Series 342
CONDUCTOR SIZE Up to 8 AWG Up to 8 AWG Up to 12 AWG Up to 12 AWG Up to 12 AWG Up to 12 AWG

(See table for complete 343- Series) TERMINAL POSITION AS SUPPLIED N/A N/A
1 2 1 3 4 3 6 4 6

Series 343

CODE 341 342 343-2 343-3 343-4 343-6

DESCRIPTION Single terminal block Duplex terminal block Triplex terminal block with 2 brass terminals Triplex terminal block with 3 brass terminals Triplex terminal block with 4 brass terminals Triplex terminal block with 6 brass terminals

All Positions PYROMATION P/N: 341

PYRO

DIN FORM B STYLE CERAMIC TERMINAL BLOCKS


The DIN Style terminal blocks are 42 mm and 50 mm in diameter. The terminal blocks are supplied with a ceramic base. They can be provided in FOR: FOR: 2-, 3-, 4-, or 6-terminal configurations. PYROMATION, INC.
SPEC NO:

Dimensions In Inches [mm] TITLE: SPEC


SIZE:

PYROMATION

NO:

2.00"

[50.8mm]

5 1.31" 1/32" = 1/32" = 1/3 FRACTION FRACTION DRAWN BY: DIM 2 DRAWN BY: DIM DATE: DA 1.58" [33.3mm] 1.30" J. DIM BROWN J. BROWN DECIMAL DIM .XX = 0.010" DECIMAL .XX = 0.010" 6/23/2011 DECIMAL DIM .XX = 0.01 [40.1mm] [33.0mm] DECIMAL DIM .XXX = 0.005" DECIMAL DIM .XXX = 0.005" DECIMAL DIM .XXX = 0.00 = 2 = 2 = 2 ANGULAR DIM ANGULAR DIM ANGULAR DIM 6 1 1.67" This document is PROPRIETARY to This document is PROPRIETARY to This document is PROPRIETA 0.18" 1.69" FORT WAYNE, INDIANA 260-484-2580 FORT WAYNE, INDIANA Pyromation, Pyromation, Inc. Pyromation, Inc. 0.18" [42.4mm] [4.6mm] Inc. [42.9mm] [4.6mm]
FRACTION DIM =

TOLERANCES

CATALOG PAGE AC-4, FIGURE A 3 NO. & SHEET DWG. NO: SIZE: 4

TITLE: SPEC NO:

CATALOG PAGE AC-

TOLERANCES

B289701 A

REV.

TOLERANCE

B289

DWG. NO. & S

210412
Terminal Blocks

210304
DESCRIPTION 2-Pole terminal block (8, 11, 14 AWG) 4-Pole terminal block 2-Pole terminal block 3-Pole terminal block 4-Pole terminal block 6-Pole terminal block

(See table for complete 21033- Series) CONDUCTOR SIZE Up to 8 AWG Up to 16 AWG Up to 16 AWG Up to 16 AWG Up to 16 AWG Up to 16 AWG

210336

CODE 210412 210304 210332 210333 210334 210336

TERMINAL POSITIONS N/A N/A


1 1 1 3 3 3 5 4 6

PYROMATION P/N

All positions P/N: 210412 PYROMATION


2006 Pyromation, Inc. PYROMATION, INC.
FOR:

SPEC NO:

AC-4

Phone (260) 484-2580 FAX (260) 482-6805 or FOR: (800) 837-6805 www.pyromation.com
PYROMATION, INC.
SPEC NO: TITLE:

SPEC NO:

TITLE: SIZE:

328-6 PAGE AC-4, FIG CATALOG


FRACTION DIM =

DWG. NO. & SHEET NO

TOLERANCES

CATALOG PAGE, AC-4 FIGURE D

1/32

Potrebbero piacerti anche