Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
01
INSTRUMENT TECHNICIAN (PLANT) JOB GRADES : 10, 11, 12, 13 AND 14 DUTY : TASK : MAINTAIN PROCESS INSTRUMENT PERFORM ZERO CHECK OF TRANSMITTER ON LINE TERMINAL PERFORMANCE OBJECTIVES (TPO) (Action, Condition and Standard)
LEVEL
JG 10
PERFORM ZERO CHECK OF TRANSMITTER ON LINE USING DIGITAL MULTIMETER AND HAND TOOLS,SO THAT THE ACCURACY IS WITHIN MANUFACTRER'S SPECIFICATION ENABLING REQUIREMENTS (Knowledge, Skill, Attitude and Safety) Knowledge of :- Types of transmitter - Permit to work procedures - Location of transmitter - Types of tools required Ability to :- Identify transmitter to be checked - Identify valves to be closed - Select tools to be used if required TOOLS/EQUIPMENT/MATERIALS
Knowledge Of :- Location of vent valves - Pressure in impulse line - Type of medium in impulse line Ability To :- Identify location of vent valve Attitude :- Open vent valve slowly Safety :- Safe working practice - Drain liquid from transmitter into a pail - not onto the floor
- Gloves
Page 1 of 2
SUB/TASKS/STEPS
ENABLING REQUIREMENTS (Knowledge, Skill, Attitude and Safety) Knowledge Of :- Multimeter operation - Transmitter output signals / units - How to connect terminals
TOOLS/EQUIPMENT/MATERIALS
3.
- Multimeter - Screwdriver
Ability To :- Correct usage of multimeter - Identify location of adjustment screw - Adjustment of zero if required
Page 2 of 2