Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
z [All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: all Regenerating mode. RELATIVE METHOD: Command: L LINE Specify first point: 0,0 Specify next point or [Undo]: @10,0 Specify next point or [Undo]: @0,-10 Specify next point or [Close/Undo]: @10,0 Specify next point or [Close/Undo]: @0,10 Specify next point or [Close/Undo]: @10,0 Specify next point or [Close/Undo]: @0,10 Specify next point or [Close/Undo]: @-10,0 Specify next point or [Close/Undo]: @0,10 Specify next point or [Close/Undo]: @-10,0 Specify next point or [Close/Undo]: @0,-10 Specify next point or [Close/Undo]: @-10,0 Specify next point or [Close/Undo]: C Command: l Specify first point: 0,0 Specify next point :@50,0 Specify next point :@0,-50 Specify next point :@50,0 Specify next point : @0,50 Specify next point :@50,0
Specify next point :@0,50 Specify next point : @-150,0 Specify next point : @0,-50 Specify next point or [Close/Undo]: c POLAR METHOD: Command: L LINE Specify first point: 0,0 Specify next point or [Undo]: @10<0 Specify next point or [Undo]: @10<270 Specify next point or [Close/Undo]: @10<0 Specify next point or [Close/Undo]: @10<90 Specify next point or [Close/Undo]: @10<0 Specify next point or [Close/Undo]: @10<90 Specify next point or [Close/Undo]: @10<180 Specify next point or [Close/Undo]: @10<90 Specify next point or [Close/Undo]: @10<180 Specify next point or [Close/Undo]: @10<270 Specify next point or [Close/Undo]: @10<180 Specify next point or [Close/Undo]: C Command: l LINE Specify first point: 0,0 Specify next point :@50<0 Specify next point :@50<270 Specify next point :@50<0 Specify next point : @50<90 Specify next point : @50<0 Specify next point : @50<90 Specify next point : @150<180
CIRCLE: (radius) Command: C Specify center point for circle :0,0 Specify radius of circle: 25
CIRCLE: [Diameter] Command: C Specify center point for circle : 100,100 Specify radius of circle : D Specify diameter of circle :100 Command: c Specify center point for circle: 50,50 Specify radius of circle or [Diameter]: d Specify diameter of circle :15
15.0000
RECTANGULAR: Command: REC Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]: 0,0 Specify other corner point or [Area/Dimensions/Rotation]: @100,50 POLYGON (IN CIRCLE) Command: pol Enter number of sides :5 Specify center of polygon :0,0 Enter an option [Inscribed in circle/Circumscribed about circle]: i Specify radius of circle: 50 Command: c Specify center point for circle :0,0 Specify radius of circle :50
POLYGON ( ABOUT CIRCLE) Command: POL Enter number of sides :7 Specify center of polygon :100,100 Enter an option [Inscribed in circle/Circumscribed about circle] :C Specify radius of circle: 50
Command: C Specify center point for circle :100,100 Specify radius of circle :50
RECTANGULAR(CORNER POINT) Command: rec Specify first corner point :0,0 Specify other corner point :100,100 ELLIPSE (ENDPOINT) Command: el Specify axis endpoint of ellipse :0,0 Specify other endpoint of axis: 100 Specify distance to other axis : 25
100.000000
25.0000
ELLIPSE[Center]
Command: el Specify axis endpoint of ellipse or [Arc/Center]: c Specify center of ellipse: 50,0 Specify endpoint of axis: @-50,0 Specify distance to other axis : 25
100
25
ELLIPSE [ARC/CENTER] Command: el Specify axis endpoint of ellipse or [Arc/Center]: a Specify axis endpoint of elliptical arc or [Center]: c Specify center of elliptical arc: 0,0 Specify endpoint of axis: 25 Specify distance to other axis or [Rotation]: 15 Specify start angle or [Parameter]: 0 Specify end angle or [Parameter/Included angle]: 270
Command: el Specify axis endpoint of ellipse or [Arc/Center]: a Specify axis endpoint of elliptical arc or [Center]: c Specify center of elliptical arc: 0,0 Specify endpoint of axis: 25 Specify distance to other axis or [Rotation]: 15 Specify start angle or [Parameter]: 120 Specify end angle or [Parameter/Included angle]: 330
ELLIPSE(ARC/END POINT)
Specify axis endpoint of ellipse or [Arc/Center]: a Specify axis endpoint of elliptical arc :0,0 Specify other endpoint of axis: 100 Specify distance to other axis : 25 Specify start angle : 0 Specify end angle : 45
OFFSET Command: o Specify offset distance : 10 Select object to offset :P1 Specify point on side to offset :P2 Select object to offset :P3
COPY Command: CO Select objects: ALL Specify base point or [Displacement/mOde] <Displacement>: 0,0 Specify second point or <use first point as displacement>: 50 Specify second point or [Exit/Undo] <Exit>: 150 Specify second point or [Exit/Undo] <Exit>: 150,150 Specify second point or [Exit/Undo] <Exit>: -10,150 Specify second point or [Exit/Undo] <Exit>: *ESC *
SCALE Command: SC Select objects: ALL Specify base point: 0,0 Specify scale factor : 5 BEFORE
10 15
AFTER
50
75
STRETCH Command: S Select objects: Specify opposite corner: P1 Specify base point: P2 Specify second point or <use first point as displacement>: 100 TEXT: Command: t Specify first corner: 0,0 Specify opposite corner: 100,20