Sei sulla pagina 1di 1
based on the following assumptions: Bolt material: Grade 43; nuts: Grade 4. Bolt tensile resistance T; = 0,75b,Aul, = 0,75 x 0,67 x 430 x Ap. Concrete strength: 20 MPa at 28 days. Bond stress between bolt shank and concrete: 1,28 MPa, Bearing stress between anchor plate and concrete: 8,0 MPa. Bolt tensile force = shank bond resistance plus anchor plate bearing resist- ance. Anchor plate thickness derived from Formulas for Stress and Strain by R J Roark, Table 8 Loading Cases 16 and 21, using plate bending stress of 270 MPa, Above stresses are in accordance with SABS 0162: Part | and SABS 0100. Souec€: Soute Rican, Freel Construction Handbook by Southern PRccon lust note. af Steel Constaictin Ch Edita (SBN 978-0-620-34810-4 422 Grade 4 nut—- —*t Wesher-—" “TJ Projection Bolt and washer plate material: Grade 43 Welds E70XX, HY pockets are not used, bolts should be positioned by means ofemplat, FRound washer to be used under nut and to bbe of sufictont size 10 provide adequate ‘beating around clearance hole in. column base pate Bolt shanks to be degreased before embec- «ing in concrete Bolt details based on concrete strength of 20NPaat28 cays, 2! “Washer plate Tabulated dimensions in mm, a rae a San Tow Fo] Se [Re] ew | name m fel mw [ize] # fo] =| | »| || / mimum boc length w concrete. 42

Potrebbero piacerti anche