Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
www.kiatechinfo.com/viewer/content.asp?IsPrint=true&imgnum=1&print_
SEDONA(GQ) >2003 > G 3.5 DOHC > Engine > Engine Con ol > P0325 Knock Sen o 1 Ci c i
De c ip ion
F nc ion Engine Knocking is characterized by undesirable vibration and noise and can cause engine damage. The knock sensor (KS) is attached to the cylinder block and senses engine knocking. A knocking vibration from the cylinder block is applied as pressure to the piezoelectric element. The knock sensor (KS) detects vibration upon increase and decrease in engine RPM and generates a voltage based on this vibration. The PCM controls the ignition timing based on the amplitude and frequency of the knock sensor signal. For example, if engine knocking occurs, the ignition timing is retarded to suppress it. DTC De c ip ion If there is little change in knock sensors signal, the PCM judged as a fault and DTC is set.
Enable Conditions
Schema ic Diag am
www.kiatechinfo.com/viewer/content.asp?IsPrint=true&imgnum=1&print_
1/2